Download more than 100 examples of thesis, proposal and project topics about fluid bed in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Dissertation for Master's Degree in Nursing Introduction: Increased intra-abdominal pressure (IAP) is known as an independent risk factor for mortality among patients in intensive care units, and the prevalence of intra-abdominal hypertension (IAH) is reported to be up to 58%. The effect of changing body position (elevating the head of the bed) on the accuracy of IAP measurement ...
Dissertation for Master's Degree Abstract Achieving higher rates of heat transfer using different techniques that can result in saving a significant amount of energy and also lead to the production of more compact and cheaper devices with higher thermal efficiency has attracted the attention of researchers. Vortex generation is one of the best methods used to increase heat ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Dissertation for Master's Degree in Educational Psychology (MA) Abstract The purpose of this research is to determine the effectiveness of psychological empowerment training on cognitive creativity and emotional creativity of students. The statistical population of this study consisted of all the female students of the third year of the first year of high school who were ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Dissertation for Master's degree (M.A.) Major: Educational Dissertation abstract (including summary, objectives, implementation methods and results obtained): This research was compiled with the aim of investigating the relationship between attachment styles and identity styles with social competence of high school students. This research is a correlational research. The ...
Dissertation for the master's degree of the Department of Psychology and Education of Exceptional Children Abstract: The purpose of the present study is to compare the executive functions of children with and without stuttering disorder. This research was of a causal-comparative type, the sample of this research includes 60 children aged 7-11, 30 normal children were selected ...
Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Master's Thesis Department: Civil Engineering (MSC) Specialization: Hydraulic Structures Abstract Minab River is the most important freshwater river in Hormozgan Province. This river is the drainage of the surface waters of the Minab catchment area, and two bridges have been built on it, the first one is the connecting road to Minab city and the second one is 1500 meters after ...
Master thesis M.Sc. Discipline: Civil Engineering, Orientation: Hydraulic Structures. Abstract River containment is generally done by dams and similar structures. The flow passing through these structures has a significant potential for erosion and scouring of susceptible beds. Relaxation ponds are designed and built mainly for the purpose of depleting flow energy and ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...
Master's thesis in the field of chemical engineering (gas engineering trend) in recent years, many horizontal wells have been drilled around the world. The main reason is the ability to increase the level of the tank in contact with the well, which increases the utilization of the well. Well testing is used to identify the models of hydrocarbon reservoirs and to identify their ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Master's Thesis of Chemical Engineering Abstract In this research, the optimal absorption conditions for cationic dyes have been investigated and the removal of brilliant green dye [1] by the natural adsorbent of khakshir has been investigated. First, the effective conditions in the amount of brilliant green removal by the khakshir stem adsorbent were researched, then using the ...
Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation to receive a master's degree in neonatal special care Abstract Title: Investigating the relationship between the knowledge and performance of nurses working in neonatal wards in the field of venipuncture in hospitals affiliated to Tabriz University of Medical Sciences in 2013 Introduction: Venipuncture is the most important therapeutic procedure among hospitalized ...
Dissertation for the degree of Professional Doctor of Veterinary Medicine (D.V.M) Abstract: The structure of the eye can be examined well with ultrasound due to the presence of large amounts of liquid in the anterior chamber and vitreous, and in many cases it is very difficult to directly examine the eye with an ophthalmoscope, especially when the anterior structures such as the ...
Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...
Master's Thesis in the field of Nano Chemical Engineering Abstract Removal of phenol from industrial effluents using nanotechnology In this research, the photocatalytic removal of phenol as a model of organic pollutant in a fluidized bed reactor under ultraviolet and visible radiations has been studied. The effects of important parameters such as pH, catalyst concentration, ...
Dissertation for receiving a professional doctorate degree in the field of medicine Persian abstract Title: Comparison of the prevalence of obsessive-compulsive disorder in children with and without functional constipation referred to the pediatric clinic of Amirkabir Hospital in 2013 Introduction: Constipation in childhood is a common problem that causes discomfort to the child ...
Dissertation for Master's Degree in Nursing (special care field) Abstract Introduction: A pressure ulcer is a tissue damage caused by pressure and can involve skin, muscle, connective tissue, cartilage and bone. Pressure ulcer is a painful, debilitating process and endangers a person's health by increasing mortality and morbidity in terms of increasing the length of ...
Dissertation for receiving a Master's degree (M.Sc) major: applied chemistry Persian Summary Raloxifene is used to treat breast cancer and infertility related to oligomenorrhea or secondary amenorrhea. Raloxifene is a new treatment that has recently become available for the prevention of osteoporosis of the spine. This medicine is taken as one pill a day. In some ways, this drug ...
Master's thesis in the field of chemical engineering, abstract of the effect of additives on crystal morphology in the crystallization process of calcium oxalate. Kidney stones are one of the most common diseases in the world, and most of its crystals are composed of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in ...
Dissertation: In order to receive a specialized doctorate degree in the field of general surgery, hydatid cyst disease is one of the common diseases of humans and animals, which is caused by Echinococcus granulosis. (1) This disease is more common in areas where there are more animals such as sheep and dogs, such as Iran, Turkey, Mediterranean countries and the Middle East, ...
Dissertation for receiving a master's degree in applied chemistry, Persian abstract. In this research, graphite particles were converted to graphene oxide by Hammer's method. Graphene nanoparticles are one of the best and most effective absorbent materials that have been produced so far. Graphene is one of the successful allotropes of carbon in the field of drug absorption and ...
Master's Thesis Abstract In this project, the coat cracker unit of Abadan refinery has been simulated using Hysys refinery software. In simulating and receiving information, feed properties and solving mass and energy balance equations have been used. Simulation data and operational data of Abadan Cat Cracker unit have been compared. Also, by changing some important operational ...
Dissertation for receiving a master's degree in food technology, Persian abstract, background and purpose: Olive tree leaves have many compounds, including oleuropein, which are related to the majority of their medicinal properties. Olive leaf extract is also rich in phenolic compounds. In order to extract phenolic compounds, olive leaves must first be dried. Natural drying and ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...
Thesis for receiving a master's degree in the field of mechanics, energy conversion, abstract: free or natural convection heat transfer is one of the most useful phenomena in industry and in the environment around humanity. Due to its wide application, this phenomenon has attracted the attention of many researchers and has prompted researchers to follow the flow of free movement ...
Mechanical Engineering, Manufacturing and Production Department, Master's Thesis, Introduction High-speed rolling bearings have many applications in rotating machines, whose task is to separate the rotating parts from the fixed parts of the machine. Accuracy is very important in machine tool applications and bearing corrosion resistance in chemical machines. In aerospace ...
Master's Thesis, Mechanical Engineering, Energy Conversion, Abstract In this thesis, using the CFD computational fluid dynamics technique, the effect of key parameters such as the effect of secondary inlet pressure on the ejector device, suction ratio, return currents caused by secondary inlet pressure and the effect of all these parameters on the hydrodynamic characteristics of ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Master's Thesis in Geophysics – Seismology 2019 introduction of spectral acceleration maps by probabilistic method for Iran in the range of 44-54 geographic longitude and 40-26-5 geographical latitude based on the analysis
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Faculty of Psychology and Social Sciences - Department of Psychology Dissertation for Master's Degree (M.A) Dissertation Abstract (including summary, objectives, methods of implementation and results obtained): The present research was conducted to investigate the effect of storytelling on the signs of stubborn-disobedience behavior. The study was an experimental type with a ...
Academic Thesis for Master's Degree (M.A) in Clinical Psychology Abstract Introduction and Objective: Internet addiction is a new and widespread issue that has been the focus of researchers and experts on social issues as a behavioral addiction in recent years. The purpose of this research is to predict internet addiction based on two personality traits: attraction, immersion, ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
In order to obtain a master's degree in the field of mechanical engineering, energy conversion, abstract: In this thesis, the mass and heat transfer by integral method in the flow of natural displacement of a fluid with a very low frontal near the wavy inclined wall and under the magnetic field has been investigated. The wall is permeable and as a result, the fluid can be sucked ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Abstract: The design of output resistant static controller to achieve fuzzy tracking for nonlinear systems described by Takagi-Sugno T-S model. The subject of this thesis is related to the problem of designing output resistant static controller to achieve fuzzy tracking for systems with time delay and uncertainty that can be modeled by Takagi-Sugno (T-S) fuzzy modeling. The ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for Master's Degree in Mechanical Engineering, Applied Design, Abstract: Microbeams are used as the main element in most sensors and actuators. In some cases, such as micro switches, this member may also be used in an environment containing fluid. Therefore, in this article, we analyzed the dynamic behavior and frequency analysis of a micro beam that is located in a ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Dissertation for Master's Degree (M.S) Field: Agriculture Major: Horticulture Abstract Sterilzia regina ornamental plant is a permanent and valuable plant. It is very important to pay attention to the substrate and its cultivation environment. Among the most important factors that should be considered in the cultivation of plants, especially permanent plants, is nutrition and ...
Master's Thesis in the field of Mechanical Engineering - Energy Conversion Abstract Numerical investigation of fluid flow and heat transfer on mesh plates with cross holes under discontinuous suction Introduction 1-1- Fluid flow on mesh plates The urgent need of modern humans to use different fuels and the problem of environmental pollution caused by improper and indiscriminate ...
Dissertation of Master's Degree Course in Curriculum Planning Semester: 94-93 First chapter: General -1. Introduction: Teachers need to be one of the most effective elements in education
Thesis of master's degree in seafaring, sea transport orientation (case study of Bandar Shahid Rajaei container terminal), February 2019, abstract in this research, the future scenarios of Bandar Shahid container traffic
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 companies accepted in Bo
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 accepted companies
Thesis - Master's Degree in Geophysics - Winter Seismology 2012 Abstract In this research, the effect of a branch fault in a subduction zone on tsunami waves using numerical modeling of tsunami waves.
Thesis for receiving a master's degree in the field of civil engineering of hydraulic structures, October 2013 This study is to quantitatively evaluate the effects of watershed operations and with the aim of evaluating the efficiency of projects
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Expert thesis Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
end Letter for receiving a master's degree (M.A.) in the field of business management, financial orientation, fall 2013. Abstract of this research is a group of items from the exploration of the basics of research evaluation regarding motivation.
Department of Industrial Management Winter 2019 Abstract: The current research is about the mutual effect of supply chain management and customer relationship management in Esfrain Steel Company. In order to answer the research questions
Dissertation for the degree of ""M.A."" Field: Educational Management Abstract of the present research with the aim of knowing and analyzing Investigating the relationship between trust in management and job satisfaction of teachers in water schools
Abstract Today, word of mouth advertising as One of the common tools of marketing and advertising has gained great importance among marketers, so that studies show that advertising
MBA Master's Thesis Summer 2013 Abstract: The purpose of this research is to investigate the relationship between spiritual intelligence, job satisfaction and organizational commitment among the employees of the National Bank of Mazandaran Province. It is Ama community
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.