Download more than 77 examples of thesis, proposal and project topics about fibers in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
Dissertation for master's degree in natural geography majoring in climatology in environmental planning Abstract One of the diseases of this century that unfortunately young people especially girls and young women are suffering from is the disease (MS), the cause of which is still unknown according to the expert doctors of the world and unfortunately they state various theories ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Master's Thesis in Handicrafts Research in Handicrafts Abstract: Fiber art is the evolved face of modern tapestry in the world, over the centuries, Iranian artists along with artists from other countries have added to the glory and splendor of the textiles produced in the world, but now they have become importers and consumers of that art-craft, and in the wide range of its ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
(Master's degree in physical education (pathology and corrective movements) The effect of yoga exercises and central stability on balance and posture abnormalities of women with multiple sclerosis Abstract Introduction: Multiple sclerosis is the most common progressive neurological disease in young adults. This disease causes the destruction of myelin in the nerved axons and ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Dissertation for Master's Degree in Physical Education and Sports Science Abstract The purpose of this research was the effect of a plyometric circuit training course on the physical fitness factors of wrestling students in district 11 of Tehran. For this purpose, 30 wrestling students of district 11 of Tehran city in the academic year of 1992-1993 were purposefully selected and ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Abstract: In electromyography studies, it is generally accepted to normalize the signals so that they can be compared and interpreted. But due to the lack of a standard method for normalization, there are many differences in the normalization method. These differences are related to the reference signal measurement method. The purpose of this study is to compare the reliability ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Dissertation (dissertation) to receive a degree... in the field of physical education and sports sciences, specialization in sports physiology. Therefore, the aim of this study was to investigate the effect of endurance, strength and parallel exercises on heart rate, systolic blood pressure, diastolic blood pressure, and PR interval in the workers of Pars Khodro Company. In ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
An academic thesis for receiving a master's degree in the field of physical education in the field of motor behavior, strengthening the factors of muscle function in the developed training stages and maintaining these abilities is considered one of the most important tasks of coaches and athletes when they are not training or are injured. With this aim, the present research ...
Master's thesis in the field of chemical nanoengineering Abstract The synthesis of silicon dioxide nanoparticles from silicon oil waste using the synthesis method of silicon dioxide nanoparticles [1] has many industrial applications. The industrial use of these particles in traditional fields as well as new fields is expanding, for which new applications are continuously found. ...
Dissertation for Ph.D. Ph.D. Persian Summary Aripiprazole is an atypical antipsychotic drug that shows its therapeutic effect with a combination of antagonistic activity of 5-HT2A receptor and partial agonistic activity of 5-HT1A and D2 dopamine receptors. This drug is used in the treatment of schizophrenia, type I bipolar disorders and as an adjunctive treatment in major ...
Master's Thesis of Chemical Engineering Abstract In the last few decades, due to the growth of the population as well as the improvement of living standards, the consumption of fibers and the production of textile waste materials have increased greatly. Burial and burning are one of the main ways of managing textile waste materials, which have destructive environmental effects. ...
Master of Physical Education (Pathology and Corrective Movements) Abstract Introduction: Multiple sclerosis is the most common progressive neurological disease in young adults. This disease destroys myelin in nerve axons and causes functional damage. One of the important areas involved in MS is the cerebellum. A problem in this structure causes a disturbance in balance, etc., ...
Academic thesis for obtaining a master's degree in the field: physical education, major: exercise physiology. Abstract The purpose of the research was to investigate the effects of elastic resistance training program on some anthropometric and physiological factors of teenage taekwondo athletes. For this purpose, 30 young taekwondo athletes with an average age of 12±1.52 years, ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Master's degree thesis, field: Chemical Engineering Abstract: In this research, the absorption of methyl orange dye, which is one of the most widely used dyes in the textile industry, by polypyrrole adsorbent based on polyvinyl alcohol has been investigated. The tests were performed in a discontinuous system using a colored solution with a concentration of 40 ppm. After ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Dissertation for M.Sc. Degree: Food Industry Abstract: Pectinases are a group of hydrolytic enzymes that break down pectic substances. Exopolygalacturonase (exo-p) and endopolygalacturonase (endo-p) are two types of this group. In this study, two fungal species, namely Aspergillus niger and Vetrichodermarisi, which were able to produce pectinase, were isolated. The results of ...
Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...
Dissertation for receiving a Master's degree (M.Sc) major: applied chemistry Persian Summary Raloxifene is used to treat breast cancer and infertility related to oligomenorrhea or secondary amenorrhea. Raloxifene is a new treatment that has recently become available for the prevention of osteoporosis of the spine. This medicine is taken as one pill a day. In some ways, this drug ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...
Persian summary of the cheese plant with the scientific name of Malva Ngalkata is native to Central Asian countries. In Iran, paneerak grows in different regions, including Kurdistan, Azerbaijan, Alborz, Tehran and Khorasan provinces. In traditional medicine, cheese plant has many therapeutic benefits and uses, such as reducing muscle and nerve pains, healing wounds, relieving ...
Introduction Engineers are always looking for better quality. In mathematics and computer science, it is the process of choosing or finding the best member in the sets of available options. Every process has the potential to be optimized and complex problems can be modeled as optimization problems in the fields of engineering, economic and business sciences. The goal of modeling ...
Dissertation for receiving a professional doctorate degree Introduction: According to the studies conducted, the prevalence of various causes of intestinal obstruction is different in the west and east of the planet, and finding the common causes in Shahrood, which is the goal of this research project, can lead the doctor to a better diagnosis. During the studies that were ...
Master's Thesis for Master's Degree Abstract Carbon nanotube can be considered the most amazing nanostructured material discovered so far. Unique features such as high strength, light weight, and high energy absorption capability have made this material recently attracted the attention of scientists in making bulletproof vests. In this thesis, a structural model in the Abaqus ...
Dissertation for receiving a master's degree in the field of agricultural engineering, food science and food industry, food chemistry. Abstract: In the meat industry, the shelf life and juiciness of the meat is of particular importance, which is the purpose of this research. In this research, the thigh and breast muscles of chicken and ostrich meat were used, and 5 samples of ...
Physiology and improvement of fruit trees. Thesis for obtaining a master's degree. Field: Agriculture, Horticulture. Attributes such as fruit fresh weight, weight
Master's thesis in the field of agricultural engineering - food science and food industry - food chemistry. Abstract of the research: In this research, strong electric fields with short square pulses and a time scale between microseconds and milliseconds were used to sanitize liquid foods, and food products were processed under environmental conditions or low temperatures and ...
Dissertation to receive the degree of Doctor of General Dentistry Persian Abstract Introduction: Restoration of the lost tissue of the periodontium is the ultimate goal of ideal periodontal treatment. Proliferation of fibroblasts along with regeneration of periodontal tissue is an ideal therapeutic result. The use of low-power laser has been one of the proposed methods to ...
Dissertation for master's degree in horticultural science, fruit work, summary: the use of healthy compounds compatible with human health and nature is one of the important concerns of technology researchers after harvesting horticultural products. The purpose of this research was to investigate the effect of oral coating of aloe vera gel and calcium chloride on the shelf life ...
Dissertation to receive a specialized doctorate degree in dentistry in the field of pediatrics Abstract History and Purpose Traumatic dental injuries are considered one of the most common events in childhood and adolescence. Among these injuries, ovalgen (falling out of the tooth from the socket) is considered a real emergency and requires quick and accurate treatment by a ...
Master's Thesis of Food Science and Industry Abstract The purpose of this research was to evaluate the effect of adding capcarrageenan and sodium alginate on the quality characteristics of soy burger during storage time of 60 days at -20°C. For this purpose, cooking characteristics, sensory characteristics, pH, tissue profile analysis were investigated every 30 days. The ...
Thesis for obtaining a master's degree in the field: Agricultural Engineering-Horticultural Sciences, specialization: Physiology and breeding of fruit trees. Abstract Enzymatic browning is the most important physiological abnormality that strongly affects the post-harvest quality and storage life of Japanese parsnip. In order to investigate the effect of distilled water and a ...
- Introduction Among herbivorous domestic animals, ruminants have a great contribution in food supply and human health. On the one hand, nutrition has played a major role in the economic and functional efficiency of these animals, so that almost two-thirds of the total cost of animal production in different livestock breeding units is allocated to feed costs, and on the other ...
Dissertation to receive a master's degree in mechanical engineering in the field of construction and production. Abstract: The growth and expansion of cities and the development of urban life require up-to-date and expandable infrastructure. Transportation systems are among the basic infrastructures in cities, among which the creation and development of subway networks is of ...
Dissertation for the Master's Degree in Plant Pathology (M.Sc.) Abstract Wilt is caused by different species of Verticilium and is one of the most important diseases of cotton in most regions of the world. Among the disease-causing species, V. dahliae is the dominant species in most parts of the world. Fungus is the cause of soil disease and causes quantitative and qualitative ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Master's thesis in the field of theology Abstract Many schools have commented on the nature of the soul and how it came into existence, among which one can mention the neo-phenomenological school of which Philip Clayton is one of its supporters. Although this school belongs to the category of materialists, it offers a special view of it, according to which, what is called life ...
Dissertation for Master's Degree in Horticulture Science Summary: The use of healthy compounds compatible with human health and nature is one of the important concerns of technology researchers after harvesting horticultural products. The purpose of this research was to investigate the effect of oral coating of aloe vera gel and calcium chloride on the shelf life and quality ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Dissertation for Master's Degree in Animal Science Abstract: In order to determine the chemical composition and physical properties of the second layer of alfalfa fodder in West Azarbaijan province, 72 samples were collected based on randomly classified sampling according to the amount of precipitation in 3 climates (treatments) including: 1) the northern basin of Urmia Lake ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
The abstract of this research was carried out with the aim of comparing the natural durability of hand-planted and natural Zerbin species against white rot[1]. For this purpose, the effect of rainbow fungus [2] (white rot agent) on hand-planted and natural Zerbin wood was analyzed. A factorial design with random blocks was used for this study. The samples were prepared and ...