Download more than 100 examples of thesis, proposal and project topics about engine cooling in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Doctoral Dissertation on Energy Conversion Abstract One of the most important issues in internal combustion engines is heat transfer in them; Because almost a third of the energy produced inside the combustion chamber is removed through engine cooling. The heat transfer of internal combustion engines is important from various aspects, including the protection of materials used ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis on Automotive Powertrain Abstract In this thesis, which is presented under the title of turbocharger adaptation suitable for EF7 engine in order to improve volumetric efficiency, firstly, the history of the invention and use of turbocharger is discussed. Then, the naturally aspirated and turbocharged engine are compared, the result of which is to clarify the ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract Due to the lack of fresh water resources, it is of great importance to discover new ways of water production. One of the new methods of producing fresh water in low capacity is the use of air humidity, which is known as condensation water production system. In this method, the flow of hot and humid air is ...
Abstract Considering the sensitivity of the geographical location and the potentials in the Azad Qeshm Special Zone and the idea of ??improving the level of social interactions with other regions of the country and attracting domestic and foreign investors and improving the economic relations of the organization
Dissertation for receiving a master's degree (M.A) in the field of architecture – Architectural engineering trend spring 2014 Urban safety area, fire training centers are one of the most effective places in the three training departments
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Master's Thesis in Computer Engineering (Software) Abstract: Reducing energy consumption in the cloud environment using virtual machine migration Reducing energy consumption is one of the most important issues of the day, especially in the industry sector. In recent years, the ever-increasing human needs for computer systems have caused the creation and expansion of more and ...
Dissertation for the degree of Master of Islamic Architecture Engineering Abstract: In the design of many existing buildings of our time, instead of considering the psychological and cultural needs of users, paying attention to organ functions and the latest examples built in advanced countries without regard to the culture of that region has been prioritized. This weakness is ...
Master's thesis in the field of electricity-power orientation Abstract Gearboxes are essential and inseparable components of power transmission systems. These machines convert torque into speed and sometimes speed into torque. The use of mechanical gearboxes in these systems has been common since long ago as an interface between the power generation sector and the power ...
Electrical-Electronics Engineering Master's Thesis Abstract In this thesis, we have used graphene nano-ribbons as an active layer of a solar cell for the first time. To simulate this cell, the non-equilibrium Green's function method was used in the mode space, and the effect of electron-photon interactions was calculated by means of Born's self-consistent approximation. To ...
Master's Thesis in Chemical Engineering, Process Design, Abstract: In this thesis, a method for thermodynamic analysis and evaluation of energy consumption of distillation tower by using side cooling is introduced. The research done in the past was aimed at the distribution of the heat diagram and checking the possibility of adding or extracting heat from all the different parts ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Master's thesis in the field of electrical engineering (power trend) Abstract of the investigation of transient electromagnetic states in wind turbines with the increasing development of wind turbines, increasing its efficiency has become more critical. One of the factors for measuring wind turbine efficiency is its performance in transient state problems. The phenomena that ...
Master's thesis in the field of electricity-power orientation Abstract Gearboxes are essential and inseparable components of power transmission systems. These machines convert torque into speed and sometimes speed into torque. The use of mechanical gearboxes in these systems has been common since a long time until now as an interface between the power generation sector and the ...
In order to obtain a master's degree in the field of mechanical engineering, energy conversion, abstract: In this thesis, the mass and heat transfer by integral method in the flow of natural displacement of a fluid with a very low frontal near the wavy inclined wall and under the magnetic field has been investigated. The wall is permeable and as a result, the fluid can be sucked ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Master's thesis in the field of electrical-electronic engineering Abstract of the construction of a humidity sensor using carbon nanotubes Today, humidity sensors have many applications in various fields, including environmental control processes, household applications, automotive industry, medicine, agriculture and chemical industries. Until now, various structures have been ...
Master's thesis in the field of electrical engineering - Power Abstract The importance of the energy issue has increased the need to use new energy sources as a producer of electrical energy. Nowadays, one of the suitable options for providing electric energy are scattered production sources. The use of distributed generation has many positive effects, such as increasing the ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...
Dissertation for Master's Degree in Energy Systems Engineering Abstract Currently in Iran, there are many gas turbines producing electrical energy whose efficiency is around 30% to 40% depending on the environmental and functional conditions, in fact two thirds of this energy from fuel combustion is wasted through exhaust fumes and thermal waste. In order to increase the ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Mechanical Engineering Master's Thesis - Energy Conversion Abstract Coating with thin layers plays a very important role in semiconductor industries and microelectromechanical and nanoelectromechanical equipment. By adding a thin layer to the surface due to interference of electromagnetic waves, the radiation properties of the surface will be completely different. In this ...
Master's thesis in the field of mechanical engineering, energy conversion trend. Abstract: Considering that heat transfer is widely used in various fields of science, it is necessary to use wide recessed or raised surfaces due to physical and spatial limitations in electrical systems. The main purpose of using these surfaces is to increase heat transfer by increasing the ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for receiving a master's degree in food technology, Persian abstract, background and purpose: Olive tree leaves have many compounds, including oleuropein, which are related to the majority of their medicinal properties. Olive leaf extract is also rich in phenolic compounds. In order to extract phenolic compounds, olive leaves must first be dried. Natural drying and ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Master's Thesis in Mechanical Engineering, Energy Conversion, Abstract: Thermal energy storage and phase change materials for use in heating and cooling systems of buildings has become an important issue in the last 20 years. When there is a mismatch between energy production and its consumption time, the issue of energy storage becomes important. In the present work, the fluid ...
Abstract: Considering the reduction of underground water resources and fossil fuels in today's world and also in Iran, prevention of energy waste and introduction of new methods in the preparation of potable fresh water from sea water will have a special place in the future world. Using methods such as evaporation-distillation methods can be one of these methods. Due to the high ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Dissertation for Master's Degree in Environment Abstract Air is considered the most vital element of the environment and its pollution endangers human health. Air pollution is one of the most important environmental issues, which itself can be the cause of many other environmental risks. There are many factors that cause air pollution, and one of the most important of them is ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...
Dissertation for master's degree in mechanical engineering, construction and production trend. Abstract One of the important topics in the field of welding in engineering structures is the discussion of reducing residual stresses in welding lines and improving the quality of welding. Residual stresses reduce the load bearing limit, the life of welded joints and change the forms ...
Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...
Master's Thesis in the field of Mechanical Engineering - Energy Conversion Abstract Numerical investigation of fluid flow and heat transfer on mesh plates with cross holes under discontinuous suction Introduction 1-1- Fluid flow on mesh plates The urgent need of modern humans to use different fuels and the problem of environmental pollution caused by improper and indiscriminate ...
Dissertation for Master's Degree in Mechanical Engineering, Manufacturing and Production, Abstract: The process of laser forming, especially in recent years, has been widely noticed. In this process, shaping is done by irradiating the laser beam on the surface of the sheet, which is accompanied by a rapid local heating and subsequent cooling of the heated area. However, the way ...
Thesis for obtaining a master's degree in industrial engineering, Fall 2012 Abstract During the past years, many efforts have been made to reduce the cost of transportation by using different models.
Academic thesis for obtaining a master's degree in the field: business management, orientation: transformation, re-engineering and organizational architecture are comprehensive plans for the current and future description of the structure and behavior of processes, information systems, personnel and organizational units, and in fact, they seek to align them with the goals and ...
Master's Thesis of Information Technology Engineering Abstract In today's world, the Internet and its most important service, the Web, has caused many changes and transformations in human life. The Internet provides all the needs of people to communicate with each other, to obtain information in any field, play and entertainment, education and any field that comes to mind. The ...
Master's Thesis of Computer-Software Engineering (M.Sc) Abstract In the age of information, the web has become one of the most powerful and fastest means of communication and interaction between people. Search engines as web applications automatically navigate the web and receive a set of available documents. The process of receiving, storing, classifying and indexing is done ...
Dissertation for obtaining a master's degree (M.A) in public administration, information systems orientation, abstract due to the changes and evolution in the field of IT and the rapid growth of the top technology of the decade. 1990, the pattern of global economic growth has fundamentally changed, as a result of which, knowledge as the most important capital has replaced ...
Dissertation for Master's Degree (M.A) Field: Industrial Management-Production Abstract In the current situation due to the increase in fuel prices, transportation fares increase, and then the prices of production and service products also increase, which causes inflation in the society, and transportation fares and inflation are dependent on fuel prices. In the current ...
Master's Thesis of Computer Software Engineering (M.Sc) Abstract The dynamic nature of the global network and its growing dimensions have made accurate information retrieval difficult. Incorrect answers returned by search engines, especially for query terms with different meanings, have caused the dissatisfaction of web users who need accurate answers to their information ...
Master's thesis in the field of mechanical engineering in the field of energy conversion. Abstract The increasing use of fossil resources, the increase of greenhouse gases and the strict standards of car pollutants are the main incentive to use biodiesels as an alternative fuel for diesel engines. Air pollution, global warming, limited and expensive fossil resources are among ...
Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...
Master's Thesis in (Educational Sciences-Management and Educational Planning) May 2014 Abstract The purpose of the present research is to evaluate the curriculum of Farhangian University campuses in Sistan province
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 companies accepted in Bo
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 accepted companies
Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including
Doctoral Dissertation in Civil Engineering - Summer 2013 Earthquake Abstract One of the appropriate tools to know the condition of the network As one of the vital artery systems, water distribution is an indicator of reliability. one hand
Thesis for receiving a master's degree in the field of civil engineering of hydraulic structures, October 2013 This study is to quantitatively evaluate the effects of watershed operations and with the aim of evaluating the efficiency of projects
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Expert thesis Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Thesis - Master's Degree in Geophysics - Seismology 2012 Abstract Seismic hazard estimation to calculate a certain level of damage and vulnerability in the design of structures is one of the most important topics and principles of earthquake engineering, but
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
end Letter for receiving a master's degree (M.A.) in the field of business management, financial orientation, fall 2013. Abstract of this research is a group of items from the exploration of the basics of research evaluation regarding motivation.
Dissertation for Master's Degree (M.A. Public Administration, Financial Management Orientation, Winter 2013) Abstract: The purpose of this research is to investigate the effect of information technology application on the performance of human resources management and performance.
Dissertation for the degree of ""M.A."" Field: Educational Management Abstract of the present research with the aim of knowing and analyzing Investigating the relationship between trust in management and job satisfaction of teachers in water schools
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Master's Thesis in Geophysics – Seismology 2019 introduction of spectral acceleration maps by probabilistic method for Iran in the range of 44-54 geographic longitude and 40-26-5 geographical latitude based on the analysis
Thesis for obtaining a master's degree in the field of civil engineering, oriented towards soil and foundation mechanics, Shahrivar 2013 Abstract Dams are always considered as infrastructure structures
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Thesis for receiving the M.A. degree. Trend: Autumn 1391 transformation abstract The present study under the title ""Investigation and pathology of the decision system of G
Doctoral Dissertation on Earthquake Geophysics Science, September 2012 Abstract In this treatise, several combined simulation methods are used in order to produce artificial maps of the earth's powerful movement. Based on this, there are two methods
Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering structure construction for static loadings have been significantly developed. But, in