Download more than 100 examples of thesis, proposal and project topics about elastic properties in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Dissertation for receiving a master's degree in the field of preservation and modification. Abstract In this research, the effect of combined modification of colloidal silver-hot water on the heat transfer from the hot press plates to the heart of the beech (Fagus orientalis) chipboard cake, the physical and mechanical properties of the chipboard and the chemical changes of the ...
Dissertation for Master's Degree in Applied Design Mechanics Abstract: Composites have received a lot of attention in recent decades due to their high strength and low weight. Such materials can fail due to static, impact, dynamic loading, etc., and the various failures that occur can cause a severe drop in strength in the structure. Engineers always think of using different ...
The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...
Master's Thesis in Food Science and Technology (M.Sc) Major: Food Engineering Abstract In this research, the effect of zadu and CHO gums at 5 levels of 0, 0.1, 0.2, 0.28 and 0.4 percent and gum arabic and xanthan gum at levels of 0, 0.5, 0.9, 1.4, 1.8 and 0.08, respectively. 0.1, 0.15 and 0.2% on the stability, rheological and sensory properties of buttermilk during 59 days of ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Dissertation for Master's degree (M.A) specialization: ""Insurance Management"" Introduction Life insurance is considered a financial tool. Life insurance is responsible for providing financial support and coverage to a family that has lost its breadwinner (insured) as a result of death. Today, life insurance is one of the most important fields of activity in the insurance ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Master's thesis in the field of structural engineering. Abstract: The increase in vulnerability caused by earthquakes and the large number of earthquake casualties caused by structures and houses that are weak in terms of construction forces people to conduct studies to reduce these risks and damages. Studies such as severe earth movement and seismic hazards related to it play ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Dissertation to receive a general doctorate, abstract, introduction and purpose, among the banding problems in orthodontics, is the creation of decalcified areas around the bands. On the other hand, during the treatment, the bands are prone to loosening and the cement used must have sufficient strength. Recently, new compounds containing amorphous calcium phosphate (ACP) have ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract In this research, the analysis of vibrations, buckling and wave propagation of wrapped nano beam under axial load on Pasternak substrate is discussed. First, the displacement and displacement field of the wrapped beam is obtained. Then, using the obtained displacement field, strain-displacement ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
Dissertation for M.Sc) in the field of mechanics in the field of construction and production. Abstract In the present research, the design and construction of the ECAR machine in order to investigate the effects of the process on carbon steel sheets was our goal. The desired research was carried out in the research workshop of Islamic Azad University, Jaseb branch. After the ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Dissertation to receive a specialized doctorate degree in dentistry in the field of pediatrics Abstract History and Purpose Traumatic dental injuries are considered one of the most common events in childhood and adolescence. Among these injuries, ovalgen (falling out of the tooth from the socket) is considered a real emergency and requires quick and accurate treatment by a ...
Master's Thesis of Food Science and Industry Abstract The purpose of this research was to evaluate the effect of adding capcarrageenan and sodium alginate on the quality characteristics of soy burger during storage time of 60 days at -20°C. For this purpose, cooking characteristics, sensory characteristics, pH, tissue profile analysis were investigated every 30 days. The ...
Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...
Master's Thesis in Mechanical Engineering, Applied Design 1-1-Introduction All humans know that the heart is a vital organ in the human body, so we cannot live without it. But with a purely mechanical view, the heart is just a pump; A very complex and important pump; And in terms of being a pump, like all pumps, there is a possibility of clogging, failure or needing to be ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Dissertation for M.Sc. Mechanical Engineering - Manufacturing and Production Trend Abstract The manufacture of square and rectangular pipes has received more attention due to their wide use in industries that require high pressure and temperature. There are different methods for making rectangular tubes, including extrusion, stretching and pressing. Another method that has been ...
Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...
Dissertation for Master's Degree in Rock Mechanics Abstract: Rock mass blasting ability is a very important feature in explosive designs in mines and construction activities, which is closely related to rock mass system, environmental conditions and blasting system. Among the factors affecting the explosiveness, there are controllable ones, and there are some that are ...
Dissertation for Master's Degree in Mining Engineering - Rock Mechanics Abstract Today, blasting operations in hard rock piles is an inevitable thing in many mining and construction projects, and in case of inaccuracy in its design, it can cause great loss of life and money to all construction or mining projects. When an explosion takes place in two different rock masses with ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of Gas Turbine Rotor Stress Analysis Using Continuous Damage Mechanics In this thesis, Lometer's unified model based on continuous damage mechanics is used to model the stress-strain behavior of a gas turbine rotor sample. The unified damage law, which is used to model creep-fatigue interaction, is based on the ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
March 2013 Field: Economics Orientation: Economic Sciences Abstract: In the highly competitive environment of the food industry, the preservation and development of the market is the result of the brand's performance. Therefore, identifying the effect of the brand on the sales performance of ingredients.
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Dissertation for receiving a master's degree in the field of civil engineering in the field of earthquakes. Abstract: The introduction of damage generators is very close to the concept of inelastic behavior and, as a result, hysteresis energy. Therefore, it can be said that the hysteresis energy at these levels can be a significant criterion for the design or control of the ...
Dissertation for Master's Degree (M.Sc) Major: Applied Chemistry Persian Summary The purpose of this research is to investigate common fatty acids in ostrich oil and determine the amount of retinol in snail secretion to make a cream with therapeutic properties. Since 3000 years ago, the healing properties of ostrich oil have been known to treat wounds, burns, joint pain and skin ...
Master's Thesis / Inorganic Chemistry Abstract Considering the application of nonlinear optical properties (NLO) in technologies such as lasers, remote communication, photovoltaic cells, information processing and holography and the mineral diversity of these materials, we started a research in this field and focused on borazine-containing dyes. Our main goal in this research is ...
Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...
Dissertation to receive the Ph.D. degree in Pharmacy. Persian summary. Quick-release oral tablets are solid pharmaceutical forms that have received special attention in the last three decades and are considered as an alternative to regular tablets and capsules. In contact with oral saliva, these tablets quickly disintegrate and turn into soluble fine granules in less than 1 ...
Academic thesis for obtaining a master's degree in the field: physical education, major: exercise physiology. Abstract The purpose of the research was to investigate the effects of elastic resistance training program on some anthropometric and physiological factors of teenage taekwondo athletes. For this purpose, 30 young taekwondo athletes with an average age of 12±1.52 years, ...
Dissertation for Ph.D. degree in Pharmacy, Persian Summary Orally-opening tablets are solid pharmaceutical forms that open in the oral cavity in less than 1 minute without leaving any residue. The purpose of this research is to prepare and evaluate fast-opening oral tablets of amlodipine mg5, which is a long-acting blocker of calcium channels used in the treatment of chronic ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Master's Thesis in Food Safety and Health Abstract: Background: Essential oils and extracts obtained from medicinal plants with antimicrobial, anticancer and antioxidant compounds are of particular importance as new and natural medicinal compounds, both in the field of health and treatment of diseases and protection of raw and processed foods. Objective: To determine the ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...