Download more than 100 examples of thesis, proposal and project topics about dynamic acrylic carpet properties in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Abstract Gas hydrates are a group of solid host compounds that play an important role in many processes such as gas storage, transfer and separation, heterogeneous catalysis and water purification. These crystals are formed at a temperature higher than the freezing point of water and high pressure. There are different methods to calculate the free energy difference: 1) ...
Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Dissertation for Master's Degree in Food Science and Engineering, Food Microbiology, Abstract: Today, the increase in environmental pollution and the decrease in oil resources have led to the development and replacement of biodegradable packaging instead of packaging derived from petroleum resources. Also, in this regard, the use of antimicrobial compounds such as silver ...
Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...
Dissertation for Master's Degree in Mechanical Engineering, Applied Design, Abstract: Microbeams are used as the main element in most sensors and actuators. In some cases, such as micro switches, this member may also be used in an environment containing fluid. Therefore, in this article, we analyzed the dynamic behavior and frequency analysis of a micro beam that is located in a ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Master's Thesis of Faculty of Art and Architecture, Department: Carpet (Painting), October 2013 Abstract: Today, in today's advanced and industrialized world, using new methods, it is trying to make Tul products
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Master's thesis in the field of chemical engineering Kidney stones are one of the most common diseases in the world, most of its crystals consist of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in controlling this disease through the control of calcium oxalate crystals has been considered. The purpose of this ...
Master's thesis in chemical engineering field, vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the triple ...
Master's Thesis Farsi Abstract: Today, with the expansion of DC consumers and non-linear loads connected to the network, the design and construction of power factor correction circuits using electronic power converters has gained special importance. With the advancement of technology, integrated circuits have come to help in this field. Due to the complexity and non-linear ...
The thesis for receiving a master's degree in business management (international marketing orientation) is a research abstract of the electronic market of an inter-organizational information system that allows buyers and sellers participating in some markets, independent of third parties, to provide information and suggestions about prices and products. The use of this new ...
Master's Thesis in Handicrafts Research in Handicrafts Abstract: Fiber art is the evolved face of modern tapestry in the world, over the centuries, Iranian artists along with artists from other countries have added to the glory and splendor of the textiles produced in the world, but now they have become importers and consumers of that art-craft, and in the wide range of its ...
Dissertation for Master's Degree in Computer Engineering - Artificial Intelligence Abstract Considering the rapid growth of complexity and size of simulation systems, designing efficient structures for evaluation and validation is an important issue. Today, Petri net is used for validation and verification. Petri nets are used to model systems of discrete events that may occur ...
Dissertation for Master's Degree in Computer Science (M.Sc) Software Orientation Abstract Smart phones and other mobile devices are becoming an ideal platform for continuous measurement of user activities by a large number of embedded sensors. In this way, energy consumption has become the most important challenge for mobile devices. Individual activity detection on smart phones ...
Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...
Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Master's thesis in the field of structural engineering. Abstract: The increase in vulnerability caused by earthquakes and the large number of earthquake casualties caused by structures and houses that are weak in terms of construction forces people to conduct studies to reduce these risks and damages. Studies such as severe earth movement and seismic hazards related to it play ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's Thesis in Computer Engineering (Artificial Intelligence) Abstract Extracting useful patterns from data sets is one of the challenging topics in data mining. On the other hand, in high-dimensional data, extracting a small set of emerging patterns with strong predictive ability is one of the important issues in creating a classifier based on emerging patterns. In the real ...
Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Field of study: Electricity, specialization: Telecommunication. Dissertation Abstract In this thesis, the problems of multi-objective and multi-sensor tracking are investigated using the rule of random particle collection. The regression probability density hypothesis (PHD) is implemented dynamically. This dynamic mode is performed by combining the transfer bias value with the ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Dissertation of the master's degree in the field: civil engineering - structure, page 1-1-problem definition: In the science of structural engineering, there has always been an attempt to predict a set of events that will have a significant effect on the efficiency and endurance of the structure during its useful life. These factors should be considered by the design engineer ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Master's thesis in the field of chemistry, analysis, abstract. In this research, the synthesis of polymer nanoparticles of ion template using sedimentation method and for the separation and preconcentration of nickel ions from aqueous samples is reported. Nickel template polymer nanoparticles by dissolving stoichiometric amount of nickel nitrate and ligand ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Thesis for obtaining a master's degree in organic chemistry. Abstract: Title: Effective three-component synthesis of new 4-aryl-5-(tert-butylamino)-2-(1-methyl-1H-pyrrol-2-yl)furan-3-carbonitrile derivatives. In this research, a direct and efficient method for preparing new 4-aryl-5-aminofuran derivatives through a three-component one-pot reaction ...
Dissertation for receiving M.Sc degree) Major: Inorganic Chemistry Dissertation Abstract: We used Density Functional Theory (DFT) method at DFT/6-31G level to investigate the geometric structure, relative energies and electronic properties of possible protropic tautomers in Nexium, Protonix and Lamivudine. The structure and relative energies of tautomers in different solvents ...
Dissertation for receiving the degree of Doctor of Dentistry, Dental Materials Research Center Abstract Objective: One of the objectives of this study was to investigate the fracture resistance of the teeth coated with various crown and root restorations. Materials and methods: 60 freshly extracted human premolar teeth were selected and randomly divided into five groups of ...
Dissertation to receive a general doctorate, abstract, introduction and purpose, among the banding problems in orthodontics, is the creation of decalcified areas around the bands. On the other hand, during the treatment, the bands are prone to loosening and the cement used must have sufficient strength. Recently, new compounds containing amorphous calcium phosphate (ACP) have ...
Master's Thesis in Chemical Engineering Abstract Vapor pressure is an important thermodynamic property in process equipment design and chemical engineering unit operation. Therefore, experimental vapor pressure data that cover the entire range of vapor pressure are very valuable, but due to the lack of accurate measurements for the vapor pressure of some materials near the ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of phenylmercury chloride. To prepare this polymer, methacrylic acid (active monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), phenylmercury chloride (target ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...
Academic thesis for obtaining a master's degree in electrical engineering, electronics orientation Abstract In this thesis, firstly, the introduction of graphene, its manufacturing method, advantages and applications in field effect transistors and the conducted research will be extracted and examined, then we will have an overview of the structure of field effect transistors ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Dissertation for obtaining a master's degree M. Sc)) Department of Chemistry - Green Synthesis of Organic Chemistry 2-phenylimidazoles boiled using ionic liquid. Imidazoles are an important group of heterocyclic compounds that have various biological and medicinal activities such as anti-hypertensive, anti-cancer, anti-HIV, anti-bacterial and pain reliever. In this thesis, new ...
Master's thesis in the field of chemistry, Analytical Chemistry, Abstract In this project, a molecular template polymer was prepared for the selective extraction of furan. To prepare this polymer, methacrylic acid (functional monomer), ethylene glycol dimethacrylate (cross-linking agent), 2,2-azobisisobutyronitrile (initiator), a mixture of pyrrole (furan substitute or target ...
Master of Chemistry (Chemistry-Physics) Abstract In the present work, the theory of stable structures, bond energies and interactions in H2SO4...HNO...(H2O)n clusters (n = 0-2) were studied at the MP2/aug-cc-pVDZ computational level. The presence of one and two H2O molecules strengthens the interaction between HNO and H2SO4 molecules, and this indicates the positive role of H2O ...
Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Thesis of the master's degree in the field: chemical engineering, abstract. In designing the network of heat exchangers, the designer usually considers high operational flexibility in the presented plan. However, some of the changes that occur in the operating conditions of the process after the design, determine the need to modify the existing network. The purpose of the ...
Master's Thesis in Chemical Engineering Abstract: The purpose of this thesis is mathematical modeling of rotary dryer for drying dicalcium phosphate. In this project, with different temperature conditions and different number of cycles of the dryer, the moisture level of the product exiting the dryer has been checked. As a result, 100 data have been obtained from the output of ...
Master's thesis in the field of chemical engineering, abstract of the effect of additives on crystal morphology in the crystallization process of calcium oxalate. Kidney stones are one of the most common diseases in the world, and most of its crystals are composed of calcium oxalate crystals. Therefore, it has been a long time that the investigation of effective substances in ...
Master's thesis in the field of chemistry, mineral orientation Abstract: Synthesis and identification of the symmetric bis((E)-2-nitrophenylallylidene)-2 and 2-dimethyl-1,3-diamine propane ligands with the general formula MLX2, where M represents zinc (II), cadmium (II) and mercury (II) metals and X includes chloride, bromide, iodide, It is thiocyanate and azide, it was done. To ...
Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...
Dissertation for Master's Degree in Physical Chemistry Abstract In this research, to evaluate the intermolecular potential energy level (IPS) of the F2-F2 system, the second virial coefficient of fluorine gas was calculated. The IPSs were obtained using the QCISD(T) level of theory and the cc-pVTZ-aug basis set. Calculations were performed in the temperature range of 100 to 600 ...
Dissertation for receiving a master's degree in applied chemistry, Persian abstract. In this research, graphite particles were converted to graphene oxide by Hammer's method. Graphene nanoparticles are one of the best and most effective absorbent materials that have been produced so far. Graphene is one of the successful allotropes of carbon in the field of drug absorption and ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
Introduction Engineers are always looking for better quality. In mathematics and computer science, it is the process of choosing or finding the best member in the sets of available options. Every process has the potential to be optimized and complex problems can be modeled as optimization problems in the fields of engineering, economic and business sciences. The goal of modeling ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...