Download the thesis about cylindrical shell vibrations✅ Word Document

Download more than 100 examples of thesis, proposal and project topics about cylindrical shell vibrations in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 115 Category: Facilities - Mechanics

Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...

Number of pages: 128 Category: Civil Engineering

Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...

Number of pages: 107 Category: Facilities - Mechanics

Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...

Number of pages: 100 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.

Number of pages: 123 Category: Civil Engineering

Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers

Number of pages: 124 Category: Civil Engineering

Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...

Number of pages: 70 Category: Veterinary Medicine

Dissertation: To receive the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract Title: Investigating the contamination of drinking water of broiler farms in Piranshahr city with Escherichia coli bacteria Drinking water is one of the vital and nutritious factors that is necessary for optimal growth and control of body temperature and should always be ...

Number of pages: 70 Category: Facilities - Mechanics

Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...

Number of pages: 62 Category: Medical Sciences

Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...

Number of pages: 94 Category: Facilities - Mechanics

Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...

Number of pages: 95 Category: Facilities - Mechanics

Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract In this research, the analysis of vibrations, buckling and wave propagation of wrapped nano beam under axial load on Pasternak substrate is discussed. First, the displacement and displacement field of the wrapped beam is obtained. Then, using the obtained displacement field, strain-displacement ...

Number of pages: 84 Category: Medical Sciences

Abstract Helicobacter pylori is a gram-negative, spiral-shaped, microaerophilic bacterium that lives in the human stomach. This bacterium is often seen in patients who suffer from chronic gastritis or stomach ulcers. Helicobacter pylori infection is asymptomatic in more than 80% of people. It seems that this bacterium plays a role in maintaining the natural ecology of the ...

Number of pages: 86 Category: Facilities - Mechanics

The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...

Number of pages: 146 Category: Facilities - Mechanics

Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...

Number of pages: 83 Category: Civil Engineering

Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including

Number of pages: 186 Category: Civil Engineering

Expert thesis‌ Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures

Number of pages: 154 Category: Civil Engineering

Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance

Number of pages: 192 Category: Management

Dissertation for Master's Degree in Public Management, Organizational Transformation Orientation Winter 1391 Abstract The current research aims to investigate the relationship between transformational leadership and Empowerment of psychology

Number of pages: 108 Category: Civil Engineering

Dissertation of master's degree in structural engineering February 2019 Chapter 1: Introduction 1-1. General, one of the most important natural events that always affects the lives of human beings

Number of pages: 85 Category: Art - Graphics

The final performance (dissertation) to obtain the master's degree in the field of world music playing in July 2013. Abstract During the last years, many efforts have been made in the field of comparing the two instruments of violin and violin.

Number of pages: 126 Category: Psychology

Dissertation for M.A. Degree: Psychology Abstract: The purpose of this research was to evaluate the relationship between stress coping styles and general self-efficacy with job satisfaction of male and female nursing staff in Dezful city health centers. The sample of the research was 123 people (equivalent to the total research population) male and female residents of the health ...

Number of pages: 101 Category: Textile Industries

Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...

Number of pages: 213 Category: Literature - Persian Language

The thesis of the master's degree in dramatic literature was Nikolai Gogol, a Russian novelist and dramatist, who dealt with social realities with an emotional and humorous look in his works. In the first chapter, the generalities of the research are presented. In the second chapter, Luk?cs's point of view in this field is also explained. In the third chapter, Gogol's approach ...

Number of pages: 127 Category: Electronic Engineering

Dissertation for Master's degree (M.Sc) in the field of electrical-power engineering. Abstract In this thesis, the design of a resistant controller in power electronic circuit breakers and its comparison with linear control methods have been examined. The main goal of research and development in this field is always to find the most suitable control method in order to implement ...

Number of pages: 125 Category: Electronic Engineering

Dissertation for receiving a master's degree, field of study: electricity-power, orientation: electric machines in a synchronous generator, a dc current is applied to the rotor coil to produce a magnetic field. Then the rotor of the generator is rotated by a prime mover to create a rotating magnetic field in the machine. This magnetic field induces a three-phase voltage in the ...

Number of pages: 123 Category: Management

Dissertation for Master's degree (M.A.) Field: Public Administration Abstract Quality of work life as a goal that improves organizational performance by creating more challenging and effective jobs and work environment for people in all organizations. The main purpose of this research is to investigate the effect of dimensions of quality of work life on the job satisfaction of ...

Number of pages: 254 Category: Art - Graphics

Dissertation for Master's degree (A.M) specialization: painting Abstract of this research was done in order to investigate new media in the art of the 20th century. Research, descriptive, analysis and content methods were used to carry out these studies, as well as the methods of collecting information in the form of library and data collection. The main purpose of this thesis ...

Number of pages: 134 Category: Civil Engineering

Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...

Number of pages: 127 Category: Biology - Environment

Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...

Number of pages: 172 Category: Architectural Engineering

The academic thesis for obtaining a master's degree in the field of visual communication. Abstract Decorations in Iranian architecture have always been used as one of the methods of creating beauty by maintaining the unity of the whole in the same multiplicity of parts. Various types of decorations have been used in Iranian architecture. These decorations include various plant, ...

Number of pages: 232 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering - Earthquake Engineering Abstract The city of Birjand, as the capital of South Khorasan province, is located in the structural zone of Sistan, which is particularly sensitive due to its proximity to seismic and fundamental faults (Neh Khawri and Westi faults in the south, Ardkol fault in the northeast, Nawaz fault in the ...

Number of pages: 175 Category: Civil Engineering

Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...

Number of pages: 141 Category: Civil Engineering

Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...

Number of pages: 98 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...

Number of pages: 107 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...

Number of pages: 144 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis

Number of pages: 105 Category: Civil Engineering

Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...

Number of pages: 87 Category: Civil Engineering

To obtain a master's degree in the field of civil engineering - structural orientation. Abstract: The subject of this research is to investigate the level of performance and accuracy of methods based on non-linear static analysis and the need to retrofit steel buildings with a dual system of bending frame with cross brace and convergent 7-shaped brace designed with the 2800 Iran ...

Number of pages: 117 Category: Civil Engineering

Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...

Number of pages: 109 Category: Electrical Engineering

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

Number of pages: 131 Category: Civil Engineering

Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...

Number of pages: 97 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Structures Chapter 1: Introduction-1-Introduction In recent years, the philosophy of traditional methods, which were based on the design of structures against natural hazards, has undergone major changes. Extensive destruction of structures designed on the basis of old regulations in recent earthquakes, advances in analysis ...

Number of pages: 120 Category: Civil Engineering

Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...

Number of pages: 82 Category: Civil Engineering

Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...

Number of pages: 109 Category: Civil Engineering

Master's thesis in the field of civil engineering, structure, first chapter: introduction 1-1. General One of the most important natural events that has always changed people's lives and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still have not ...

Number of pages: 154 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...

Number of pages: 123 Category: Chemical - Petrochemical Engineering

An academic thesis for receiving a master's degree in chemical engineering, environmental orientation. Among the models that are able to make successful predictions for the performance of reverse osmosis membranes, that is, the amount of separation and flow flux in a wide range of physical conditions (membrane and solution) and laboratory conditions (pressure and concentration), ...

Number of pages: 134 Category: Civil Engineering

Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...

Number of pages: 63 Category: Chemical - Petrochemical Engineering

Dissertation to receive a master's degree in the field of Analytical Chemistry, Abstract Biosynthesis of gold nanoparticles with small size and biological stability are very important and have various biomedical applications. In this work, an easy and simple method for the green synthesis of gold nanoparticles using willow tree bark extract is reported. The bark of the willow ...

Number of pages: 185 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...

Number of pages: 130 Category: Management

Dissertation for Master's Degree (M.A.) Major: Information Systems Management Abstract One of the important trends in business and management in the 21st century, which has been seriously raised since the mid-90s, is focusing on the spirituality of employees in organizations. Adherence of public sector servants to ethics and the crystallization of this commitment in their ...

Number of pages: 105 Category: Chemical - Petrochemical Engineering

Master's Thesis in Chemical Engineering (Gas Orientation) Abstract Laboratory Investigation of Gas Dehumidification Using Triethylene Glycol Solution in Hollow Fiber Membrane Contactors In this study, two hollow fiber membrane contactors with different types of Polyvinylidene Fluoride (PVDF) and Polypropylene (PP) fibers have been used for gas dehumidification by Triethylene ...

Number of pages: 164 Category: Civil Engineering

Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...

Number of pages: 127 Category: Civil Engineering

A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...

Number of pages: 140 Category: Civil Engineering

Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...

Number of pages: 137 Category: Chemical - Petrochemical Engineering

Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...

Number of pages: 147 Category: Chemical - Petrochemical Engineering

A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...

Number of pages: 73 Category: Chemical - Petrochemical Engineering

Dissertation for Master of Chemical Engineering Abstract: In this research, it is attempted to solve one of the major problems in the field of drug production, i.e. improving the solubility of drug particles in body fluids[1] by using the process of solvent/anti-solvent precipitation and nano-scale sediment production in a ?-shaped microchannel, the effect of surfactant ...

Number of pages: 78 Category: Chemical - Petrochemical Engineering

Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...

Number of pages: 235 Category: Chemical - Petrochemical Engineering

Dissertation for receiving M.Sc degree) Major: Inorganic Chemistry Dissertation Abstract: We used Density Functional Theory (DFT) method at DFT/6-31G level to investigate the geometric structure, relative energies and electronic properties of possible protropic tautomers in Nexium, Protonix and Lamivudine. The structure and relative energies of tautomers in different solvents ...

Number of pages: 107 Category: Chemical - Petrochemical Engineering

Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...

Number of pages: 70 Category: Chemical - Petrochemical Engineering

Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...

Number of pages: 148 Category: Chemical - Petrochemical Engineering

Thesis of the master's degree in the field: chemical engineering, abstract. In designing the network of heat exchangers, the designer usually considers high operational flexibility in the presented plan. However, some of the changes that occur in the operating conditions of the process after the design, determine the need to modify the existing network. The purpose of the ...

Number of pages: 110 Category: Electronic Engineering

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

Number of pages: 70 Category: Veterinary Medicine

Dissertation for receiving professional doctorate degree in veterinary medicine Abstract In order to detect Histomonas mele agridis in slaughtered turkeys in Isfahan province, 200 blood samples and 200 liver samples were taken in the slaughterhouse and after DNA extraction, the 550 bp fragment of 18SRNA gene was amplified. In addition, liver samples were preserved in 10% ...

Number of pages: 59 Category: Chemical - Petrochemical Engineering

Dissertation for Master's Degree in Chemistry, Chemistry, Abstract: Epoxy resins, which are thermosetting polymers, have properties such as high thermal stability, good adhesion, high chemical resistance, easy molding, and moisture resistance. These resins are used as adhesives, coatings, paints and polymer tools. The most common epoxy resin is prepared from the reaction of ...

Number of pages: 116 Category: Veterinary Medicine

Dissertation: To obtain the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract title: Evaluation of the total dissolved solids (TDS) factor in the drinking water of poultry farms in Piranshahr city. Water is considered one of the most important chemical substances in terms of biology and exists in solid, liquid, and vapor forms in nature. Water is one ...

Number of pages: 68 Category: Agricultural Engineering

Persian summary of the cheese plant with the scientific name of Malva Ngalkata is native to Central Asian countries. In Iran, paneerak grows in different regions, including Kurdistan, Azerbaijan, Alborz, Tehran and Khorasan provinces. In traditional medicine, cheese plant has many therapeutic benefits and uses, such as reducing muscle and nerve pains, healing wounds, relieving ...

Number of pages: 89 Category: Food and Packaging Industries

Dissertation for receiving a master's degree in the field of agricultural engineering, science and food industry, food microbiology. Abstract The antimicrobial effect of elderberry kernel extract as a substitute for chemical preservatives in the market was investigated on the chemical, microbial and sensory characteristics of mayonnaise. The measurements showed that the ...

Number of pages: 91 Category: Facilities - Mechanics

Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...

Number of pages: 129 Category: Facilities - Mechanics

Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract: Electromechanical micro and nano systems have been noticed due to their distinctive features and unique characteristics, mainly in the two fields of sensors and sensors, in various sciences such as mechanics, aerospace and medicine. Electrostatic stimulation is one of the simplest and most ...

Number of pages: 97 Category: Chemical - Petrochemical Engineering

Dissertation for Master's Degree in Analytical Chemistry Abstract Nowadays, nanostructures have attracted the attention of many researchers due to their new features and applications in different fields and branches of science and technology. Meanwhile, nanocomposites, due to their unique physical and chemical properties, as well as potential applications in catalytic, ...

Number of pages: 78 Category: Agricultural Engineering

Dissertation for obtaining a master's degree in the field of: Agricultural Engineering, Agricultural Management. Abstract: Rice is one of the major crops of Gilan province and plays an important role in the income of rural households. The amount of rice yield is threatened every year by various factors such as pests, diseases and weeds. Blast disease is one of the most damaging ...

Number of pages: 69 Category: Facilities - Mechanics

Dissertation for receiving M.Sc degree in mechanical-structural engineering and the production of aluminide permeable coatings for the protection of gas turbines used in power plant, aviation, marine, oil and gas and petrochemical industries, which are mainly attacked by high temperature oxidation and hot corrosion phenomena. In this research, in order to use the effect of ...

Number of pages: 64 Category: Facilities - Mechanics

Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...

Number of pages: 130 Category: Civil Engineering

Master's Thesis in the field of Water Engineering - Water Structures Abstract: The effect of piles with the presence of gaps and collars in reducing the local scour depth of the bridge foundation is one of the important issues in hydraulic engineering, the investigation of the local scour around the bridge foundation. Local scour has the potential to compromise the structural ...

Number of pages: 104 Category: Chemical - Petrochemical Engineering

Dissertation to receive a master's degree in the field: Chemistry, specialization: organic. Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, fullerene C60 and nine different nanotubes have been used as carriers of the drug molecule 8-hydroxyquinoline. First, the structure of HQ-8 drug molecule and nanotubes ...

Number of pages: 71 Category: Animal Husbandry - Poultry Farming

A Master's Thesis in the field of Animal Science- Animal Physiology Abstract: The effect of adding dry citrus pomace powder on the reproductive performance of old broiler chickens with the aim of improving egg quality and sperm penetration into the vitelline layer and increasing fertility. The number of 36 broiler chickens of the Cobb 500 strain and their 12 hens of the same ...

Number of pages: 131 Category: Food and Packaging Industries

Thesis for receiving a master's degree in the field of agricultural engineering, food science and food industry, food technology, abstract. Halva in Iran, despite its high potential in diversity and creating added value, has not been industrially produced to date, and the purpose of this research is to investigate the formulation of wheat flour halva and its production and ...

Number of pages: 105 Category: Facilities - Mechanics

Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...