Download more than 33 examples of thesis, proposal and project topics about cylindrical candles in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Master's Thesis in the field of Water Engineering - Water Structures Abstract: The effect of piles with the presence of gaps and collars in reducing the local scour depth of the bridge foundation is one of the important issues in hydraulic engineering, the investigation of the local scour around the bridge foundation. Local scour has the potential to compromise the structural ...
Master's thesis of Ardakan Shahrivar Faculty of Art and Architecture 2013 During the Safavid era, Shah Ismail declared the Shia religion as the official religion of the Safavid dynasty. Continuity and long life of this dynasty and strength
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Dissertation for receiving a master's degree, field of study: electricity-power, orientation: electric machines in a synchronous generator, a dc current is applied to the rotor coil to produce a magnetic field. Then the rotor of the generator is rotated by a prime mover to create a rotating magnetic field in the machine. This magnetic field induces a three-phase voltage in the ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Dissertation for Master of Chemical Engineering Abstract: In this research, it is attempted to solve one of the major problems in the field of drug production, i.e. improving the solubility of drug particles in body fluids[1] by using the process of solvent/anti-solvent precipitation and nano-scale sediment production in a ?-shaped microchannel, the effect of surfactant ...
Academic Dissertation for Master's Degree in: Organic Chemistry 1-1) Introduction Today, nanotechnology [1] is an attractive subject that has attracted the attention of scientists, industrialists and even ordinary people due to the special properties and practical potentials of these materials. Considering the wide applications of carbon nanotubes, the methods of mass production ...
Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...
Persian summary of the cheese plant with the scientific name of Malva Ngalkata is native to Central Asian countries. In Iran, paneerak grows in different regions, including Kurdistan, Azerbaijan, Alborz, Tehran and Khorasan provinces. In traditional medicine, cheese plant has many therapeutic benefits and uses, such as reducing muscle and nerve pains, healing wounds, relieving ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Dissertation to receive a master's degree in the field: Chemistry, specialization: organic. Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, fullerene C60 and nine different nanotubes have been used as carriers of the drug molecule 8-hydroxyquinoline. First, the structure of HQ-8 drug molecule and nanotubes ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Mechanical Engineering Master's Thesis - Applied Design Abstract Today, in various industries such as aerospace, atomic energy, chemical industries, refineries, petrochemical industries, etc., there is a need to use high-pressure mechanisms to enable the completion of relevant processes. The increase in pressure is done inside the cylindrical chambers and as a result, such an ...
Master's thesis in the field of agricultural engineering - food science and food industry - food chemistry. Abstract of the research: In this research, strong electric fields with short square pulses and a time scale between microseconds and milliseconds were used to sanitize liquid foods, and food products were processed under environmental conditions or low temperatures and ...
Thesis for Master of Science in Agriculture Abstract In order to investigate the effects of different levels of iron and the use of mulch on the growth and performance of beans in the agricultural year of 2013 for one season of autumn cultivation after harvesting peanuts in Salestan village of Astana Ashrafieh in Gilan province, it was carried out using a split-plot experiment ...
Dissertation for Master's Degree in Natural Resources (M. Sc) Major: Forestry and Ecology Abstract In this study, the mountain almond reserve (Amygdalus Arabica Olive) in Kolam district of Badreh city in Ilam province, which is a typical reserve, was investigated. First, in the area, the range of the cam reserve, its identification and polygon was digitally closed. Within the ...
Dissertation for master's degree in Applied Design-Dynamics and Control Abstract: Transverse instability is one of the common problems in high-speed rail vehicles, which occurs on rails without arches and due to the friction-creep nature of wheel-rail contact that creates non-conservative forces in the system. This phenomenon is called hunting, which is a type of ...
Abstract: The green wheat aphid, Sitobion avenae (Fabricius), has been one of the important pests of small grains, especially wheat, in recent years, and its population is expanding, and it is one of the important factors of barley yellow dwarf virus transmission. Recently, it has been suggested that induced resistance can be used to reduce the insect population. Induced ...
Dissertation: To receive the degree of professional doctor of veterinary medicine (D.V.M.) Farsi abstract Title: Investigating the contamination of drinking water of broiler farms in Piranshahr city with Escherichia coli bacteria Drinking water is one of the vital and nutritious factors that is necessary for optimal growth and control of body temperature and should always be ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for the Master's Degree in Plant Pathology (M.Sc.) Abstract Wilt is caused by different species of Verticilium and is one of the most important diseases of cotton in most regions of the world. Among the disease-causing species, V. dahliae is the dominant species in most parts of the world. Fungus is the cause of soil disease and causes quantitative and qualitative ...
Master's Thesis of Horticultural Sciences, Physiology and Breeding of Medicinal Plants Abstract In order to investigate some physiological and morphological properties of castor plant under drought stress and nitrogen fertilizer in different cultivars of this plant, an experiment was conducted with a basic design of randomized complete blocks in the form of split factorial in ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing the efficiency of energy storage systems due to the limitation of natural resources and with the aim of reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. ...
Master's Thesis, Energy Conversion Engineering, Abstract: In many processes in the industry, the combination of liquid droplets with gas flow will lead to problems such as corrosion of downstream equipment and loss of expensive liquids. To solve these problems, the phases are separated from each other with the help of a separator. Cyclone separators, as a type of high efficiency ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...