Download more than 100 examples of thesis, proposal and project topics about crack modeling in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Dissertation of Discontinuous Structure Abstract: In recent years, the use of composite material in the construction and strengthening of structures has expanded greatly. The structure of this material is such that there is a possibility of crack formation between the layers. Due to the increase in load, these cracks grow and cause a sharp drop in the strength and ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...
Master's Thesis Abstract In this project, the coat cracker unit of Abadan refinery has been simulated using Hysys refinery software. In simulating and receiving information, feed properties and solving mass and energy balance equations have been used. Simulation data and operational data of Abadan Cat Cracker unit have been compared. Also, by changing some important operational ...
Dissertation for Master's Degree in Rock Mechanics Abstract The unexpected stress intensity factor of some engineering structures has caused a lot of financial and collateral damage. In investigating the causes of failure, researchers gradually found that the design of many of these structures was correct based on the theory of elasticity and resistance of materials, and the ...
Presented to obtain a master's degree in the field of mechanical engineering-applied design orientation. Abstract In this research, we investigated the free vibration of a cracked beam and found its natural frequencies. In the first part, by using the open crack model, by modeling the cracked part as a beam-shaped element and satisfying the boundary conditions, we obtained the ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of Gas Turbine Rotor Stress Analysis Using Continuous Damage Mechanics In this thesis, Lometer's unified model based on continuous damage mechanics is used to model the stress-strain behavior of a gas turbine rotor sample. The unified damage law, which is used to model creep-fatigue interaction, is based on the ...
Thesis - Master's Degree in Geophysics - Winter Seismology 2012 Abstract In this research, the effect of a branch fault in a subduction zone on tsunami waves using numerical modeling of tsunami waves.
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Master's thesis in information technology management, comprehensive quality trend, first chapter, introduction, the emergence of the global village, which has been in existence for several decades, has brought about tremendous changes in matters related to the management and organization of organizations, which unfortunately, not only did our country not contribute to its ...
Thesis for obtaining a master's degree in the field: computer, software, abstract. In a sensor network, which is a pervasive distributed system, communication synchronization is one of the discussed cases. One of the main tasks of synchronizing processes is mutual exclusivity. The new algorithms provided are more fair compared to the old algorithms. In this thesis, we present a ...
Master's Thesis of Faculty of Technology and Engineering, Computer Department Abstract: The issue of concurrency control in databases is a necessary and important issue. Asynchronous execution of transactions in a database management system may lead to inconsistencies. Inconsistency is caused by incorrect values ??for existing data, due to conflict and interference of ...
Dissertation for Master's degree (M.A.) field and direction: Business Management - International Business. Abstract of the current research is to model the international marketing strategies of high-tech products in companies active in the field of nanotechnology, and in this regard, to investigate the role of marketing trends and international marketing experiences on ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation to receive a Master's Degree in Business Administration (M.A.) Orientation: Internal Abstract: The aim of the current research is to investigate the relationship between the components of information technology through transfer channels on the components of human resources management. To collect information in the field of research, library studies have been used to ...
An academic thesis for receiving a master's degree in chemical engineering, environmental orientation. Among the models that are able to make successful predictions for the performance of reverse osmosis membranes, that is, the amount of separation and flow flux in a wide range of physical conditions (membrane and solution) and laboratory conditions (pressure and concentration), ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...
Master's Thesis in Chemical Engineering, Thermodynamics and Kinetics Abstract: A major part of the final properties of the product in emulsion polymerization is determined by the particle size distribution. In this project, an accurate model based on population balance equations (zero-one model) which includes the phenomena of nucleation and particle growth has been chosen to ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Master's thesis in the field of instrumentation and automation engineering in the oil industry, abstract modeling and non-invasive control of implantable blood pumps in the body for heart failure patients. Left ventricular assist devices (LVAD) are mechanical pumps that are surgically placed in the body of patients who are in the dangerous and final stages of congestive heart ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Dissertation for Master's Degree in Chemical Engineering Abstract Critical characteristics for materials such as critical temperature, critical volume and critical pressure are important characteristics for predicting many thermodynamic properties of different materials. Knowing the critical properties plays an essential role in all hydrocarbon production and process operations. ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's Thesis on Simulation and Process Design Abstract So far, many methods have been presented to remove phenol from wastewater, among them, the membrane bioreactor process has received attention in the last decade. The use of hollow fiber membrane contactor in this process is to avoid direct contact between two phases and increase the surface-to-volume ratio. In the current ...
Dissertation for M.Sc. Chemical Engineering-Environmental Engineering Abstract: Microbiological fuel cells (MFC) are considered as one of the important potentials in providing clean and renewable energy in the future. In addition to providing electrical energy, which is the most widely used and flexible among other types of energy, MFCs not only do not cause the slightest ...
Master's Thesis in Chemical Engineering Abstract: The purpose of this thesis is mathematical modeling of rotary dryer for drying dicalcium phosphate. In this project, with different temperature conditions and different number of cycles of the dryer, the moisture level of the product exiting the dryer has been checked. As a result, 100 data have been obtained from the output of ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...
Master's thesis in the field of electrical-power engineering Abstract: The ground system refers to a set of conductors with different structures that are placed in the ground to protect equipment, human safety against electrocution, prevent unwanted overvoltages and damage to HV equipment. The importance of earth resistance is because it plays an important role in protecting the ...
Dissertation for M.S.c Master's Degree, Orientation: Systems Abstract: Vehicle sensor networks include mobile nodes that measure the physical and chemical parameters of the environment during movement. Sensor nodes usually have limited energy, and this lifetime limitation has caused many researches by researchers on wireless sensor networks, but the issue of lifetime in ...
Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power systems trend Abstract Today, significant advances in semiconductor technology and the emergence of high-power switches that have the ability to be turned off by a control signal on the one hand and the better efficiency of multi-level converters compared to two-level converters on ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Dissertation for Master's Degree in Water Resources Engineering Abstract Nowadays, due to the issue of water crisis and the need for accurate planning, the use of statistical models and methods is increasing. The research conducted in this field has also shown the usefulness of using statistical methods. The use of different forecasting methods has many advantages, including ...
Thesis Mechanics to get a Master's degree Abstract: First, the solution of Volterra-type anti-plate displacement in a rectangular plate with limited length and width and different boundary conditions is obtained by the method of separation of variables. Then, the distributed displacement technique is used to obtain the integral equations related to the rectangular plate weakened ...
Dissertation for M.Sc. Degree: Power Electronics Abstract: Distribution networks have various loads that consume different amounts of reactive power. Considering the effect of the type of load on the location and size of capacitor banks in distribution systems, in this thesis, a novel method for modeling different network loads in order to improve the voltage profile and reduce ...
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Department of Industrial Management Winter 2019 Abstract: The current research is about the mutual effect of supply chain management and customer relationship management in Esfrain Steel Company. In order to answer the research questions
Dissertation for Master's Degree in Educational Planning Summer 2019 Abstract: This research aims to investigate the quality of services of educational complexes in districts 1 and 2 of A
Dissertation for the degree of ""M.A."" Field: Educational Management Abstract of the present research with the aim of knowing and analyzing Investigating the relationship between trust in management and job satisfaction of teachers in water schools
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Abstract The general purpose of the research is to analyze the content of social studies books for the fourth and fifth grades of elementary school based on metacognitive skills. Descriptive research method and basically a ""research"" Content analysis " is cup
Thesis of the master's degree in the educational field: MBA 2013 Farsi Abstract Many business managers consider marketing to mean sales or advertising, while the concept of market
Doctoral Dissertation on Earthquake Geophysics Science, September 2012 Abstract In this treatise, several combined simulation methods are used in order to produce artificial maps of the earth's powerful movement. Based on this, there are two methods
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation of master's course in the field of educational sciences, history and philosophy of education, winter 93 Abstract: This research aims to analyze the content of moral concepts and themes in the Holy Quran and with the aim of
Dissertation for obtaining a master's degree (A..M) orientation: Human Resources Winter 2019 Abstract With the advancement of technology and the complexity of organizational activities, it can be boldly claimed that the working life of
Dissertation for receiving master's degree (M.A) in regional planning orientation, winter 2013 Abstract: Today, many researchers pay attention to the role of tourism in economic and social development
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Master's Thesis Field: Executive Management Focus: Strategic Management Academic Year: 1389-1391 Abstract of Research Measuring market risk is a problem that has been on researchers' minds for a long time
Dissertation for Master's Degree in Public Management, Organizational Transformation Orientation Winter 1391 Abstract The current research aims to investigate the relationship between transformational leadership and Empowerment of psychology
The first chapter General 1 - 1 program introduction Economic planning requires knowledge of the general performance of the country's economy. But in most countries, some of the economic activities are exposed to politics
The thesis of the master's degree course in the field of economic sciences, February 2013, is an abstract of the prediction of effective tools and solutions for the purpose of planning and compiling financial methods. Prediction accuracy is important
Master's Thesis M.Sc. Industrial Engineering Industries-Industries trend of academic year 1389-1392 Abstract: With increasing government supervision and the increasing attention of public opinion to environmental issues, companies
Master's thesis in the field of clinical psychology, abstract of evaluating a model for predicting students' mental health based on religious faith, with the mediation of happiness, ambivalent attachment style, and locus of control. The research method is correlational. The research community is all the students of Shiraz University who are studying in 1992-1993
Dissertation for Master's Degree in Industrial Engineering, Industrial Orientation, Esfand 90, Abstract Today, due to the progress in technology, the globalization of markets, the diversity of customer demand, and the increase
Thesis for obtaining a master's degree in industrial engineering, Fall 2012 Abstract During the past years, many efforts have been made to reduce the cost of transportation by using different models.
Master's Thesis in Industrial Management - Operations Research. Abstract Many researches have been conducted in the field of urban transportation, each of them trying to improve these networks by specifying the type of vehicle and also a specific purpose. The current thesis also tries to provide a mathematical model to increase the income of Tehran subway. For this purpose, we ...
Master's thesis in the field of business management Abstract Finding a qualified and skilled workforce in today's dynamic environment is considered vital. The organization should know the standby force and know how to communicate with it. In this research, a pattern was identified for the value offered by the employer. According to this model, desirable and attractive working ...
Dissertation for obtaining a master's degree in the field of psychology for exceptional children. Abstract The field of independence is an important topic of study and research in the field of mental health and education in the world. Cognitive-behavioral play therapy methods are offered to deal with concerns such as anger, anxiety, perfectionism, aggression, separation, social ...
In order to obtain a master's degree in the field of economic development and planning, Esfand 1990, abstract: forecasting the amount of investment needed to achieve the goals of each program (for example, economic growth of 6%, which is in the third program of TOS
Dissertation for obtaining a master's degree (M.A) in the field of social sciences (researcher orientation) when a brief look at today's societies and modern families! We have no doubt that kindergarten is an essential need. Mothers who leave the house early in the morning to do work and return tired in the evening, grandparents who are either absent or unable to take care of ...