Download more than 100 examples of thesis, proposal and project topics about corrosion of metals in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Master's thesis in the field of chemical nanoengineering, abstract modeling of chloride ion removal from gas condensate using nanofiltration of chloride ion in gas condensate can cause severe corrosion of equipment and pipes. Therefore, it is necessary to remove it from the condensate flow. The aim of this work is the mathematical modeling of the nanofiltration process for the ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Master's thesis in the field of mechanical engineering (applied design trend) Abstract of the study of the deterioration of non-isotropic TWB sheets under the hydroforming process. During the research, four different metals of aluminum alloys 6111-T4, 5083-H18, 5083-O and dual-phase steel DP590 and two spherical tensile tests and simple uniaxial tensile tests were used. Then we ...
Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Master's degree thesis in the field of chemical engineering, thermokinetic and catalyst orientation. Abstract The purpose of this research is to estimate the electrical conductivity of natural waters based on modern mathematical methods. To achieve this, the waters of the Karaj and Jajrud rivers are considered as special cases. For this purpose, 20 sampling stations were ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...
Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers
Master's thesis in the field of civil and environmental engineering. Abstract The main problem in using landfill biogas is the presence of pollutants such as hydrogen sulfide. Hydrogen sulfide gas is colorless, toxic, flammable, and has an unpleasant odor. It is highly toxic and produces SO2 when biogas is burned. In addition, hydrogen sulfide has a corrosive effect. It costs a ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Medical Biotechnology Master's Thesis Background Abstract: Fibroblast growth factors (FGF) and their receptors (FGFR) play an essential role in the cell. Dysregulation of FGF/FGFR signaling pathways is associated with many abnormalities and cancer development. From this group, type 2 fibroblast growth factor receptor plays an essential role in cell signaling and regulation of ...
The master's thesis of precision instruments and automation in the oil industry. The introduction of the entire research is one of the important scientific, technical and economic topics, the issue of corrosion of metals and the protection of metal facilities. Investigating the topic of corrosion is not so simple and with all the research done, its factors are still not known ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Dissertation for obtaining a doctorate degree in the field of mechanical engineering - manufacturing and production: the advantages of using semi-solid processes are reducing the amount of gas porosity and shrinkage and modifying the microstructure, which aims to improve the mechanical properties of the part. In this research, the cooling ramp method has been used to produce the ...
Dissertation for Master's Degree in Agricultural Engineering - Food Science and Technology - Food Technology Abstract Vegetable oil is considered a strategic product in our country. The amount of import of this product in the country is important, and for this reason, the effort to produce crude oil extracted from oilseeds in the country, at the level of competition with its ...
Dissertation for receiving a master's degree, specialization: accounting, abstract: most people do not know properly about investment methods, they invest their financial resources and savings in different markets in order to get more profit and maximize their wealth. Some people are looking for less profit and without risk. For this reason, they invest the financial resources ...
Master's Thesis of Precision Instrumentation and Automation in the Oil Industry. Abstract: Corrosion rate prediction and wear rate constant in gas brain tube using neural network is a phenomenon that is very complex due to the influence of various factors and cannot be modeled easily. In order to predict and model corrosion, attention is paid to its physical, chemical and ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
To get a master's degree in mechanical engineering Abstract: Today, the use of aluminum and magnesium alloys in the automotive and aerospace industries is increasing due to the high strength of these alloys and their light weight. Since the forming ability of these alloys is low at ambient temperature, forming these alloys at high temperatures improves their formability. ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Master's thesis of Ardakan Shahrivar Faculty of Art and Architecture 2013 During the Safavid era, Shah Ismail declared the Shia religion as the official religion of the Safavid dynasty. Continuity and long life of this dynasty and strength
Master's thesis in the field of economic sciences for the academic year 2013-1394 The first chapter Generalities of the research Introduction Today in many countries, especially in the developing countries, besides the economy
Dissertation of master's degree in system engineering, economic-social program orientation. Rezi system economic February 2013 Abstract: Considering the importance of financial markets and
Dissertation for Master's Degree in Accounting Abstract: The purpose of this research is to investigate the impact of stock market fluctuations on the performance of companies. The desired criteria for measuring the performance of companies are return on equity (ROE) ? return on assets (ROA) ? net profit and economic added value and the desired criterion for fluctuations ? ...
Dissertation for Master's Degree (M.A) in the field of Natural Geography, Climate Hazards Abstract Dust storms are destructive weather phenomena that cause irreparable damage to urban areas, fields, facilities, roads, etc. every year. This phenomenon is affected by special weather conditions, and if the mechanism of its development and expansion is known, it is possible to ...
Dissertation for M.A. Orientation: Natural Geography (Geomorphology-Hydrology) Abstract The increasing population growth followed by the development of industrial activities on the one hand and non-compliance with environmental requirements on the other hand, has caused huge amounts of pollutants to enter the environment in the last few decades. Accumulation of some dangerous ...
Dissertation for Master's Degree (M.A.) Major: Finance. Dissertation abstract (including summary, objectives, implementation methods, and results obtained): The purpose of this research is to build appropriate portfolios by considering investors' risk tolerance and their preferences in a flexible, practical, and realistic manner. For this purpose, a rule-based fuzzy expert ...
Master's thesis in the field of handicrafts, research orientation. Abstract: The bull symbol, like other ancient symbols in the ancient handicrafts of Iran, has an eternal meaning. In this first research, all the myths related to the bull in ancient texts have been examined. Then, using common methods in depth psychology for mythological and symbology studies, the ancient myths ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Academic Dissertation for Master's Degree in Visualization Foreword I have been a native of the marginal area of ??Halil Road for several years. I remember that on every hill or height we saw a pit dug and a large number of broken bones and pottery, which sometimes had patterns on them, and it was also heard many times that a person or people dug a place and pulled out objects ...
Dissertation for receiving a master's degree, field of study: electricity-power, orientation: electric machines in a synchronous generator, a dc current is applied to the rotor coil to produce a magnetic field. Then the rotor of the generator is rotated by a prime mover to create a rotating magnetic field in the machine. This magnetic field induces a three-phase voltage in the ...
Dissertation for Master's Degree (M.A.) Major: ""Production and Operations Management"" Thesis abstract (including summary, objectives, implementation methods and results): With the increase in competition in the global trade arena, the way to supply and select suppliers of machinery and spare parts in the supply chain is considered an important challenge for most organizations. ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Dissertation for Master's Degree in Civil Engineering Majoring in Environmental Engineering Abstract In this research, the effect of biological reactions on the removal of organic substances in wastewater during transfer from production sources to the treatment plant in conventional networks and new small diameter networks was investigated. For this purpose, a part of these ...
Master's thesis in the field of civil engineering (environmental engineering) is an abstract of the surface absorption method, one of the effective methods for removing metals, including nickel metal. In this research, modified rice paddy has been used as absorbent material. Since this adsorbent is a natural material with a high contact surface, in addition to its high ability ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Master's thesis in the field of civil engineering (hydraulic structures) abstract of sediment transfer and sedimentation, the consequences such as the creation of sediment islands in the river path and as a result the reduction of flood flow transfer capacity, corrosion of river structures and It includes other problems. Also, suspended sediments affect the quality of water for ...
Dissertation for Master's Degree in Civil Engineering - Abstract Hydraulic structures in high dams of spillways, as one of the dependent hydraulic structures, have the important role of discharging the incoming floods into the dam reservoir with sufficient safety in free flow or under pressure downstream. In tunnel overflows where the flow is at a high speed and often under ...
Dissertation for Master's Degree in Business Administration (M.A) Major: Finance Abstract Companies use various financial sources in order to implement profitable projects and achieve maximum efficiency in order to increase the interests of their shareholders. In general, the main goal of companies and for-profit institutions is to earn more profit and then increase the wealth ...
Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis
A master's thesis in the field of electrical engineering - field telecommunications, abstract, investigation and analysis of leaf reflective structures in the field of plasmonics for the application of passive components in the design of optical integrated circuits, limits the diffraction limit of the miniaturization of optical elements. Surface plasmon polaritons that propagate ...
Dissertation for Master's Degree (M.A.) Major: ""Production"" Abstract: The implementation method in this research, which is applied in terms of purpose and descriptive-analytical in nature, the research hypotheses were expressed in two formats, descriptive statistics and regression model, and spss was used for calculations. The main goal of this research is to investigate the ...
Master's Thesis Field: Civil Engineering Abstract Bridges are inseparable members of the means of communication and are very influential in economic and social conditions. The passage of time and random loads are among the things that threaten the health of bridges. Abnormal loads caused by natural accidents, execution errors and some other issues can cause progressive collapse ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Master's Thesis of Civil-Environmental Engineering Abstract Garbage is one of the environmental pollutants that cause many problems such as the spread of pollution in water, air and soil and transmission to humans and animals directly or indirectly. Today, with the ever-increasing expansion of urban and industrial societies, we are witnessing the widening of the amount of these ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Dissertation to receive the master's degree ""M.Sc. Orientation: ""Biochemical Engineering"" Abstract: The presence of sulfur compounds in gasoline creates a serious problem in air pollution, environment, corrosion of equipment and destruction of human health. The new environmental standards also impose strict limits on the amount of sulfur and aromatic compounds in gasoline. ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Master's thesis in the field of inorganic chemistry Abstract In this thesis, we investigate the anticancer diamine ruthenium complexes by computational chemistry, which examines the following: energy analysis, which examines the absolute energy value, dipole moment, isotropic and anisotropic polarizability of the complex. 2- The analysis of the frontal orbitals, the energy of ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
M.Sc. Dissertation for Master Degree in Chemical Engineering - Process Engineering Abstract Mercaptans are removed from hydrocarbon streams by various methods. The use of caustic soda solution and mucoli sieve beds are among the most widely used methods. In the oil and gas industries of our country, washing with relatively dilute caustic solution is often used to remove light ...
Doctoral thesis in the field of chemical engineering abstract theoretical and experimental investigation of the continuous process of desalination of heavy crude oil using microwaves and ultrasonic waves Desalination of crude oil is the first step in oil refining, by which the undesirable compounds with the oil are separated before they reach the main unit. In order to reduce ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
Master's Thesis of Chemical Engineering Abstract In the last few decades, due to the growth of the population as well as the improvement of living standards, the consumption of fibers and the production of textile waste materials have increased greatly. Burial and burning are one of the main ways of managing textile waste materials, which have destructive environmental effects. ...
Dissertation for Master's Degree (M.SC) Major: Chemistry and Essential Oil Technology Farsi Summary Introduction: Soil contamination with heavy metals is an important issue that these toxic elements can be transferred in the terrestrial ecosystem and have a potential risk to the quality of food and health, the environment. Soil pollution with heavy toxic metals has increased ...
Master's thesis in the field of mining chemistry Abstract: In this study, the effect of amide substitution on the surface of graphene oxide was studied. Two amines were chosen to change the contact surface and absorption rate. of a linear diamine such as ethylenediamine[1] and cyclic amine 6-aminouracil[2] with two different characteristics were evaluated. After the synthesis ...
Dissertation for obtaining a master's degree in the field of chemical nanoengineering Abstract In the uranium enrichment unit by centrifuge, UF6 gas after passing through the centrifuge and performing the enrichment process, enters the cold trap and is solidified and collected at a low temperature. One of the absorbents used to absorb uranium hexafluoride is sodium fluoride. The ...
Master's Thesis in the field of Nano Chemical Engineering Abstract Removal of phenol from industrial effluents using nanotechnology In this research, the photocatalytic removal of phenol as a model of organic pollutant in a fluidized bed reactor under ultraviolet and visible radiations has been studied. The effects of important parameters such as pH, catalyst concentration, ...
Master's thesis in the field of chemical engineering. Abstract of the laboratory study of cadmium removal from drinking water. Today, the pollution of natural waters with heavy metals has caused concern in many countries of the world due to the destructive effects it has on living organisms. Cadmium enters drinking water through sewage and erosion of mineral rocks and effluents ...
Dissertation for receiving the degree of Doctor of Dentistry Abstract The long-term clinical success of implants is dependent on osseointegration and adhesion of soft tissues and epithelium to implant surfaces. Various indices including: plaque index, gingival index, bleeding during probing and bone resorption are used to evaluate the health of the soft tissues around the ...
Master's thesis in the field of polymerization engineering, abstract was determined by using experimental design methods to determine the optimal feed recipe for the preparation of nitrile rubber. Initially, to determine the factors affecting the rate of polymerization, screening tests were designed according to the Plate-Boorman method, which examines a large number of factors ...
Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract Lipase is a carboxylic ester hydrolase enzyme that acts on triacylglycerol to release fatty acids, glycerides and glycerol. The discovery of the ability of lipase to catalyze the esterification reaction started a broad chapter in the field of this enzyme's functions. In this study, with the knowledge of the ability ...
Thesis for receiving a master's degree in the field of chemical engineering, environmental orientation. Abstract: Ethylenediaminetetraacetic acid, due to its ability to solubilize and deactivate metal ions by forming a complex in the aqueous environment, has many applications, especially as a chelating agent for iron fertilizer. The synthesis of this substance is done in ...
Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...
Dissertation for receiving a master's degree, field of study: electricity-power, orientation: electric machines 1.1 Introduction: In a synchronous generator, a dc current is applied to the rotor coil to produce a magnetic field. Then the rotor of the generator is rotated by a prime mover to create a rotating magnetic field in the machine. This magnetic field induces a ...
Dissertation to receive a master's degree (((M.sc) specialization: medical nanotechnology) Abstract In the present research, the cation exchange property of clinoptilolite is used due to its negative charge in its structure. The connection of this research topic with medical nanotechnology is due to the nanopores and porosity of clinoptilolite and the high absorption level of ...
Master's thesis in the field of chemistry, mineral orientation Abstract: Synthesis and identification of the symmetric bis((E)-2-nitrophenylallylidene)-2 and 2-dimethyl-1,3-diamine propane ligands with the general formula MLX2, where M represents zinc (II), cadmium (II) and mercury (II) metals and X includes chloride, bromide, iodide, It is thiocyanate and azide, it was done. To ...