Download more than 100 examples of thesis, proposal and project topics about control system design in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis of Precision Instrument Engineering and Industrial Automation in Oil Industries Abstract Non-linear dynamic systems face many challenges that must be investigated. Among these problems, we can point out things like extreme nonlinearity, changing operating conditions, dynamic uncertainty, both structured and unstructured, and external disturbances. Despite the ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Abstract: The design of output resistant static controller to achieve fuzzy tracking for nonlinear systems described by Takagi-Sugno T-S model. The subject of this thesis is related to the problem of designing output resistant static controller to achieve fuzzy tracking for systems with time delay and uncertainty that can be modeled by Takagi-Sugno (T-S) fuzzy modeling. The ...
Submitted for Master's Degree Submitted for Master's Degree Abstract In addition to lateral instability, one of the major threats to passenger cars, especially SUVs, is the risk of overturning. In this thesis, a coordination strategy based on fuzzy logic is designed for the integrated operation of active steering, differential, brake and anti-roll bar subsystems. Separate ...
Thesis for receiving the degree of M.Sc. Industrial Engineering-Industrial Engineering Summer 2013 Abstract: In today's age, are there fewer companies? It can be seen that it is exclusively related to the production of a product.
1- General 1- 1- Introduction Quality can be defined in different ways, most people only have a conceptual understanding of quality, or in other words, an understanding of one or more specific features in a product or service. Conceptual understanding of a point
Master's thesis in the field: executive management, orientation: strategic management. Abstract: Information technology, which until several years ago was considered a competitive advantage and a strategic weapon by organizations, is now considered as a competitive need. The use of information and communication technology and research devices that have up-to-date information ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...
Dissertation for Master's degree (M.Sc) in the field of electrical-power engineering. Abstract In this thesis, the design of a resistant controller in power electronic circuit breakers and its comparison with linear control methods have been examined. The main goal of research and development in this field is always to find the most suitable control method in order to implement ...
Master's Thesis of Faculty of Humanities, Department of Management Abstract Considering the importance of brands in creating value and increasing the cash flows of institutions, it is necessary for managers of units to pay special attention to this category and strive to form, create and maintain a brand that can meet the expectations of consumers, shareholders and other groups ...
Obtaining a master's degree in the field of electrical engineering, electronics, abstract, mechanization of tools is one of the most important and extensive fields used in production processes. Due to the complexity and uncertainty of machining processes, recently soft computing techniques [1] based on physical models have been preferred to predict the performance of machining ...
Dissertation for Master's Degree in Computer Engineering-Artificial Intelligence and Robotics Abstract: Every year, many traffic accidents occur all over the world due to driver drowsiness and inattention, which cause a lot of loss of life and money. One of the ways to detect fatigue and lack of concentration is to use driver face monitoring systems. By receiving images from the ...
Master's thesis in the field of computer engineering (artificial intelligence) abstract design and implementation of contradiction resolution in an intelligent assistant decision system based on the diversity of points of view, resolution of inconsistency is an important procedure in many intelligent systems, including law-based systems. This procedure determines the order of ...
Master's Thesis of Faculty of Technology and Engineering, Computer Department Abstract: The issue of concurrency control in databases is a necessary and important issue. Asynchronous execution of transactions in a database management system may lead to inconsistencies. Inconsistency is caused by incorrect values ??for existing data, due to conflict and interference of ...
Dissertation for obtaining the master's degree ""M.Sc."" Abstract Mechatronic Engineering Considering the reduction of potable water resources and also the increasing population of cities, the increase in the number of subscribers, the need to increase the speed and accuracy in meter reading and reduce excess costs, in order to achieve modern technologies, extensive research has ...
Dissertation for Master's Degree in Power Electrical Engineering Abstract In this thesis, a hybrid power generation system using fuel cell/battery/supercapacitor to power a light electric vehicle with independent excitation electric motor drive system was studied and simulated. The electric vehicle system consists of a feed and control system, multiple sources, power control ...
Master's Thesis Electricity- Pollution power of big cities has become an acute issue for years. Expert research shows that the main cause of pollution in cities are cars with internal combustion engines. Combustion vehicles have many disadvantages, among which we can mention things such as dependence on a specific type of energy (oil), production of greenhouse gases, production ...
Dissertation for Master's Degree in Telecommunication Electrical Engineering (Field) In this thesis, a patch microstrip antenna with very effective changes in the ground plane and its radiation part is studied to increase efficiency, create various modes of frequency response and the possibility of controlling these modes. The changes applied to this antenna have created a new ...
Master's Thesis, Electrical Engineering, Power, Abstract: The sliding mode control method is one of the most important non-linear control methods, whose distinctive characteristics are insensitivity to parameter changes, complete rejection of disturbance, and dealing with uncertainty. This controller first brings the system from the initial state using the law of reaching the ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Seminar for obtaining a master's degree in the field of electrical engineering, electronics, abstract mechanization of tools is one of the most important and extensive fields used in production processes. Due to the complexity and uncertainty of machining processes, recently soft computing techniques [1] based on physical models have been preferred to predict the performance of ...
Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...
Dissertation for Master's degree (M.Sc) 1 Chapter 1: Overview of the design 1-1 Statement of the problem The complete automatic pilot system is a set of hardware and software that, while controlling the bird, provides the possibility of observing the position, speed and condition of the bird as well as passing the waypoints. Common systems usually include a position measurement ...
Introduction Flexible Power Transmission Networks (FACTS[1]), is one of the aspects of the electronic revolution that is happening in all fields of electrical energy. The concept of FACTS was first proposed in 1988 by Hingorani. In addition to the advantages of fast and reliable switching, the range of semiconductor power devices provides opportunities to value electrical energy ...
Dissertation for Master's Degree in Electrical-Electronic Engineering (M.Sc) Abstract Sulfur recovery process by Klaus method is one of the most common methods of separating elemental sulfur from acid gas resulting from the sweetening process in gas and oil refineries. But due to the complexity of this process and the multivariable nature of the reaction furnace and the lack of ...
Dissertation for M.Sc. The tendency of the abstract power transmission networks of modern power systems is increasingly changing due to the increase in demand and limitations in the construction of new lines. One of the consequences of such a stressed system is the risk of losing stability after a disturbance. Flexible alternating current transmission systems (facts) are very ...
Dissertation for receiving the master's degree ""M.Sc."" Trend: The power of the series active filter is designed for harmonic separation and load voltage regulation in non-linear loads of single-phase and three-phase harmonic voltage source type. A new method for extracting harmonics of load voltage is proposed under the name of absolute value method, which is applied to the ...
Dissertation to receive a master's degree in mechanical engineering in the field of construction and production. Abstract: The growth and expansion of cities and the development of urban life require up-to-date and expandable infrastructure. Transportation systems are among the basic infrastructures in cities, among which the creation and development of subway networks is of ...
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation for receiving a master's degree in the field of architecture, Mehr 2013 Abstract: One of our needs today is to have a space to get acquainted with new architectural technologies in the world
Abstract Considering the sensitivity of the geographical location and the potentials in the Azad Qeshm Special Zone and the idea of ??improving the level of social interactions with other regions of the country and attracting domestic and foreign investors and improving the economic relations of the organization
Dissertation for receiving a master's degree (M.A) in the field of architecture – Architectural engineering trend spring 2014 Urban safety area, fire training centers are one of the most effective places in the three training departments
Dissertation for Master's Degree in Geography and Urban Planning Chapter 1: General Research 1- 1- Proposing the issue of urbanization expansion and its relationship with social and economic harms is one of the main characteristics of the country's urban development pattern in the last few decades, and accelerated growth and development and unbalanced distribution in the new era ...
Dissertation for Master of Public Administration (M.A) majoring in public financial management Abstract: Currently, the operational budgeting method is one of the budgeting methods used in developed countries. The history of this method goes back to the aftermath of World War II and the United States of America. In recent years, the term ""operational budgeting"" which ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
Thesis for receiving the master's degree in architectural engineering (M.A) fall 2013 Abstract Today, the elderly constitute a large segment of the population of any society, due to the control of population growth and
Graduate School of Thesis for Master's Degree (M.A.) Abstract The general purpose of the current research is the design of mathematics courseware (1) and its effect on the learning and memorization of first-year male high school students in Kermanshah. The research is applied and semi-experimental. The statistical population includes all male students in the first grade of high ...
The thesis for obtaining a master's degree in the field of elementary education. The present research was conducted with the aim of designing and producing an electronic book of experimental sciences for the fifth grade of elementary school and investigating its effect on the learning and memorization of students of the fourth grade of elementary school and comparing it with the ...
Dissertation for obtaining a master's degree in educational technology, abstract; The aim of the current research was to investigate the external cognitive load created in multimedia based on Merrill's educational design model in the biology course. In terms of purpose, this research is practical and in terms of methodology, it is among quasi-experimental researches. The ...
Dissertation for master's degree in geography and urban planning Abstract One of the issues that most cities in the world are struggling with is natural disasters. Due to the unpredictability of natural disasters and the need to make quick and correct decisions and implement operations, theoretical and fundamental foundations have created a knowledge under the title of crisis ...
Dissertation for Master's Degree (M.A.) Field: Accounting Abstract In this research, the risk and returns (systematic and extraordinary) of stocks on the tenure of the board of directors of companies are discussed. One of the elements of the corporate governance structure is the board of directors. Shareholders use the two components of risk and return to evaluate the ...
Abstract Auditors generally evaluate the quality of the internal control system in companies to determine and design the audit plan. The generally accepted principles of auditing state that evaluating the quality of the internal control system in determining the ability of the internal control system of the units in the control environment is necessary and essential before ...
Dissertation for Master's Degree in General Psychology Abstract: The purpose of this study was to investigate the relationship between emotional expression styles and control style in domestic violence against women with the role of gender stereotypes. The statistical population includes all women who referred to the forensic medicine of Alborz province in the city of Karaj in ...
Dissertation for Master's Degree (M.A) in Information Systems Management Abstract Today, insurance companies play an important role in the distribution of financial resources. Meanwhile, insurance companies try to make the most of information systems in order to gain a competitive advantage. The main goal of this research is to determine the impact of information systems ...
Dissertation for Master's Degree in Remote Sensing and Geographical Information System - Water and Soil Resources Abstract The increase in population and the excessive development of cities, especially in their outskirts, regardless of environmental and human characteristics, has caused irreparable damage to the environment and its residents. For this reason, the issues of ...
Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract. The many advantages of on-site calibration compared to calibration in the calibration center have led to the formation of mobile calibration teams in all companies that work in the field of calibration. Therefore, in recent years, the design of standards and equipment suitable for ...
Dissertation to receive a master's thesis on the impact of organizational resource planning system on supply chain performance in Iran Khodro Company 1-1) Introduction In today's era, the global competition, customer demand for high quality, increased variety of products and fast service, has increased pressures on organizations that did not exist before. As a result, ...
Dissertation for Master's Degree in Electrical Engineering (M.Sc) Abstract The power system stabilizer is added to the excitation system in order to improve the damping of the power system during low frequency disturbances. For large-scale power systems that include a large number of connected generators, setting the power system stabilizer parameters will be a complex and ...
Master's Thesis in Computer Engineering (Artificial Intelligence) Abstract Multi-agent systems are computing systems in which several agents interact and work together to achieve a specific goal. The reason for the emergence of such systems is the existence of situations in which a problem must be solved in a distributed fashion. For example, in situations where the use of a ...
Master's Thesis in Electrical-Control Engineering Abstract In this article, diagnosis, reconstruction and fault prediction of nonlinear systems with uncertainty are investigated. The diagnostic criterion is the residual signal calculated from the difference between the system output and a sliding mode viewer. The idea of ??sliding mode is to compensate the effect of ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Dissertation for Master's Degree in Information Technology Engineering - Computer Networks Major Abstract Wireless surveillance networks are an important branch of wireless multimedia sensor networks with some unique features. The quality of service in wireless surveillance networks is closely related to the packet loss rate. Occurrence of congestion is one of the main and most ...
Master's Thesis in Computer Engineering (M.Sc) Abstract: Today, automatic control is widely used in transportation systems. There are several reasons for using this method, the most important of which are cost reduction, the ability to make devices lighter, more safety for the passengers or to keep them away from danger. The last two cases are more visible in systems that have ...
Dissertation for Master's Degree in Computer Engineering - Artificial Intelligence Abstract Considering the rapid growth of complexity and size of simulation systems, designing efficient structures for evaluation and validation is an important issue. Today, Petri net is used for validation and verification. Petri nets are used to model systems of discrete events that may occur ...
Master's Thesis in Electrical Engineering (M.Sc) Major: Electronics Abstract: The increase in demand for portable systems has led the electronics industry to pay special attention to power consumption as an important criterion. Adders are important elements in many digital systems. For this reason, various digital collectors have been proposed in the current era, each of which ...
Master's Thesis in the field of electrical engineering (control) abstract of the temporal analysis of the transmission of control signals through multi-stage links on industrial networks in order to implement wide control loops with high flexibility. The advancement of technologies related to communication networks in recent decades and their expansion in the upper layers of the ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis of Mapping Engineering Field of Remote Sensing Abstract Updating land databases in urban environment is a difficult and costly task. Satellite remote sensing techniques have been widely used in the extraction and control of land cover change at different scales, which have led to useful results. Doing this becomes easier with the help of automatic change ...
Dissertation for Master's Degree in Civil Engineering, Structural Orientation Abstract: Today, due to the increasing space limitations and economic savings, it is inevitable to use diagonal bridges to avoid lengthening the route and increase road safety. The diagonal issue of the bridge will cause a different and sometimes complex behavior in the bridge under the effect of the ...
Dissertation for Master's Degree in Civil Engineering - Transportation Planning Abstract Ramp control is one of the most effective highway management strategies and has created many benefits in terms of increasing output in bottlenecks, reducing travel time, number of accidents, etc. Ramp control consists of two competing constraints: freeway capacity and ramp queue. The ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
To obtain a master's degree in the field of civil engineering - structural orientation. Abstract: The subject of this research is to investigate the level of performance and accuracy of methods based on non-linear static analysis and the need to retrofit steel buildings with a dual system of bending frame with cross brace and convergent 7-shaped brace designed with the 2800 Iran ...
Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...
Dissertation for receiving a master's degree in the field of: Power Electricity, the increase in the presence of non-linear power electronic loads in distribution networks, on the one hand, and the ongoing changes in distribution networks, such as the presence of scattered production sources and the possibility of forming power microgrids [1], have increased the need for new ...
Dissertation for Master's Degree in Civil Engineering, Structures Chapter 1: Introduction-1-Introduction In recent years, the philosophy of traditional methods, which were based on the design of structures against natural hazards, has undergone major changes. Extensive destruction of structures designed on the basis of old regulations in recent earthquakes, advances in analysis ...
Dissertation for Master of Electrical Engineering (M.A.) Direction: Power Abstract Reliability assessment in power networks is essential. With the discussion of smart grids in traditional power systems, a lot of attention has been paid to the use of renewable resources, electric cars that can be connected to the grid, and also other types of energy sources such as CHPs[1]. On ...
Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...
Dissertation for Master's Degree in Mechatronics Abstract Today, the use of inter-vehicle communication as one of the technologies to increase the safety and comfort of travel in the field of transportation and many car manufacturing companies is being considered. A type of waste of time and energy that includes a major part of street traffic is the problem of car parking. The ...
Dissertation for Master's degree (M.A) specialization: Sports Management Abstract: Strategic planning is a process to equip the organization's resources and unify its efforts to achieve the mission and long-term goals according to the internal and external possibilities and limitations of each organization. The purpose of this research is to design and compile a strategic plan ...
Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy for uncertainty estimation. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a result, the volume of controller ...