Download more than 100 examples of thesis, proposal and project topics about computational fluid dynamics in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for obtaining the master's degree ""M.Sc."" (Chemical Engineering - Thermodynamics and Kinetics) Abstract: Keywords: Computational fluid dynamics, bubble, continuity and failure, floating bed reactors, multiphase systems, vertical vertical flows, PBM, DQMOM, recently liquid gas floating bed reactors have received attention due to their wide application in chemical, ...
Dissertation for Master's Degree in Energy Conversion Mechanical Engineering Abstract: Fluid propulsion vector orientation has emerged as an important technology for high performance air vehicles. This technology can improve the maneuverability of the aircraft by changing the nozzle flow and its deviation from its axial direction. The purpose of this study is to investigate the ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Master's Thesis in the field of Mechanical Engineering - Energy Conversion Abstract Numerical investigation of fluid flow and heat transfer on mesh plates with cross holes under discontinuous suction Introduction 1-1- Fluid flow on mesh plates The urgent need of modern humans to use different fuels and the problem of environmental pollution caused by improper and indiscriminate ...
endname? Rasht Master's Degree: Civil Engineering (M.S.C.) Focus: Hydraulic Structures Academic Year 2011-2012 Summary of the Minab River, the most important river of Khan? The fresh water is in Hormozgan province. this river
Master's Thesis Department: Civil Engineering (MSC) Specialization: Hydraulic Structures Abstract Minab River is the most important freshwater river in Hormozgan Province. This river is the drainage of the surface waters of the Minab catchment area, and two bridges have been built on it, the first one is the connecting road to Minab city and the second one is 1500 meters after ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures. In this research, the effect of geobags on the scour control of bridge piers has been studied using Computational Fluid Dynamics (CFD) method. Geobags are geotextile bags that are filled with materials such as sand, concrete or materials from river dredging. Due to the ...
Master's thesis in the field: Chemical Engineering Abstract In this research, a comprehensive two-dimensional model based on the Finite Element Method (FEM) is proposed for modeling gas-solvent membrane contactors to remove carbon dioxide[1] from synthesis gas. Aqueous solution of monoethanolamine has been used as absorbent solvent stream and CO2/N2 gas mixture as gas stream. ...
Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Mechanical Engineering Master's Thesis - Energy Conversion One of the ways to reduce energy consumption for underwater devices is to reduce the drag on these devices. The nose of underwater objects is one of the most important parts of these objects in dealing with currents. By optimizing this part, the drag can be reduced by controlling the boundary layer of the fluid, by ...
Master's Thesis, Mechanical Engineering, Energy Conversion, Abstract In this thesis, using the CFD computational fluid dynamics technique, the effect of key parameters such as the effect of secondary inlet pressure on the ejector device, suction ratio, return currents caused by secondary inlet pressure and the effect of all these parameters on the hydrodynamic characteristics of ...
Master's Thesis, Energy Conversion Engineering, Abstract: In many processes in the industry, the combination of liquid droplets with gas flow will lead to problems such as corrosion of downstream equipment and loss of expensive liquids. To solve these problems, the phases are separated from each other with the help of a separator. Cyclone separators, as a type of high efficiency ...
Master's Thesis of Mechanics, Energy Conversion, Abstract In this study, by using the computational fluid dynamics technique, an attempt has been made to obtain the optimal dimensions for the injection nozzles of the vortex tube device. For this purpose, numerical simulation has been performed for different values ??of length, width, and height of injection nozzles, and other ...
Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...
Dissertation for receiving a master's degree in chemical engineering, advanced orientation. Abstract The limitation of heat transfer fluids in various industries due to their poor thermal conductivity has caused the improvement of the heat transfer of working fluids to be considered as a new method of advanced heat transfer. So that the idea of ??dispersing solid particles in ...
In order to obtain a master's degree in the field of mechanical engineering, energy conversion, abstract: In this thesis, the mass and heat transfer by integral method in the flow of natural displacement of a fluid with a very low frontal near the wavy inclined wall and under the magnetic field has been investigated. The wall is permeable and as a result, the fluid can be sucked ...
Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...
Thesis of master's degree in media management, winter 2013, the study of Hamshahri, Jam Jam and Khorasan online newspapers, the literature abstract of the subject in the field of online newspapers, including articles
Master's thesis in the field of computer engineering (Torin Computational Networks Abstract Software (GRID) has provided a context that heterogeneous resources can be used in different geographic locations to solve complex scientific, engineering and business problems. Scheduling operations play a key role in GRID's performance. Due to the dynamics of resources and imprecise ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Chemical engineering master's thesis without preface today simulation in processes can be an important tool to solve problems in different industries. A new idea that should be done in the real world by trial and error with a lot of costs and risks can be simulated in the environment of a strong software and the results can be used. Simulation can also be used to check and ...
Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...
Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy for uncertainty estimation. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a result, the volume of controller ...
Master's thesis in the field of chemistry, mineral orientation Abstract: Synthesis and identification of the symmetric bis((E)-2-nitrophenylallylidene)-2 and 2-dimethyl-1,3-diamine propane ligands with the general formula MLX2, where M represents zinc (II), cadmium (II) and mercury (II) metals and X includes chloride, bromide, iodide, It is thiocyanate and azide, it was done. To ...
Dissertation for Master's Degree in Physical Chemistry Abstract In this research, to evaluate the intermolecular potential energy level (IPS) of the F2-F2 system, the second virial coefficient of fluorine gas was calculated. The IPSs were obtained using the QCISD(T) level of theory and the cc-pVTZ-aug basis set. Calculations were performed in the temperature range of 100 to 600 ...
Thesis for obtaining a master's degree in the field: Chemistry, specialization: Analytical Chemistry, Abstract In recent years, the use of nanotubes as nanocarriers for drug delivery has been researched. In this research, carbon nanotubes CNT(5-5), CNT(0-6), BNNT(0-6) and BNNT(5-5) doped with Ga have been used. First, the nanotubes were drawn using Gauss View and Nanotube ...
Dissertation for receiving the master's degree ""M.Sc. Field of study: Electricity, specialization: Telecommunications Abstract In this thesis, multi-objective and multi-sensor tracking problems are investigated using the rule of random particle collection. The regression probability density hypothesis (PHD) is implemented dynamically. This dynamic mode is performed by combining ...
Dissertation for Master's Degree in Nursing Introduction: Increased intra-abdominal pressure (IAP) is known as an independent risk factor for mortality among patients in intensive care units, and the prevalence of intra-abdominal hypertension (IAH) is reported to be up to 58%. The effect of changing body position (elevating the head of the bed) on the accuracy of IAP measurement ...
Master's Thesis in Mechanical Engineering, Applied Design 1-1-Introduction All humans know that the heart is a vital organ in the human body, so we cannot live without it. But with a purely mechanical view, the heart is just a pump; A very complex and important pump; And in terms of being a pump, like all pumps, there is a possibility of clogging, failure or needing to be ...
Dissertation for Doctoral Degree Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy to estimate uncertainty. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a ...
Thesis for receiving a master's degree in the field of mechanics, energy conversion, abstract: free or natural convection heat transfer is one of the most useful phenomena in industry and in the environment around humanity. Due to its wide application, this phenomenon has attracted the attention of many researchers and has prompted researchers to follow the flow of free movement ...
The thesis of the master's degree course in the field of economic sciences, February 2013, is an abstract of the prediction of effective tools and solutions for the purpose of planning and compiling financial methods. Prediction accuracy is important
Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...
Master's Thesis: Tourism Management Introduction In the circumstances that the 20th century has ended, rural development is still facing many issues and challenges, because the past strategies in the field of rural development have not been successful and have not been able to provide for issues such as poverty, employment, health, food security and environmental sustainability.
Master's Thesis of Faculty of Humanities, Department of Management Abstract Considering the importance of brands in creating value and increasing the cash flows of institutions, it is necessary for managers of units to pay special attention to this category and strive to form, create and maintain a brand that can meet the expectations of consumers, shareholders and other groups ...
Master's Thesis in Persian Language and Literature Abstract: In the eyes of linguists, movement means the movement and transfer of a body from one place to another. Movement and dynamism are created in the poem when the poet is rich in thought and emotion, and his poem is a reflection of nature and life and is tied to human emotions, and the poet, relying on goodness and purity ...
Master's Thesis of Precision Instrument Engineering and Industrial Automation in Oil Industries Abstract Non-linear dynamic systems face many challenges that must be investigated. Among these problems, we can point out things like extreme nonlinearity, changing operating conditions, dynamic uncertainty, both structured and unstructured, and external disturbances. Despite the ...
Dissertation for receiving the master's degree ""MSc"" specialization: applied chemistry Farsi abstract of the thesis or dissertation (including: summary of objectives, implementation methods and results obtained in maximum 10 lines): The possibility of manipulating matter at the nano level was first proposed in written form by Richard Feynman. During his conference called ...
Master's thesis in the field of chemical engineering (simulation and process control) abstract design of the control system for the fluidized bed reactor for the production of linear light polyethylene of the LLDPE unit of Jam Petrochemical under the license of Basel and Spherilene technology with an annual production capacity of 300,000 tons of product is one of the largest ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Master's Thesis, Energy Conversion, Abstract: In this project, we will numerically investigate a stable gas flow in a microchannel with a rectangular cross-section. The flow with a certain temperature enters the channel with a constant temperature wall. Momentum and energy equations are discretized and solved numerically. Discretization has been done by FVM method and ...
Master's thesis in the field of mechanical engineering - energy conversion trend Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Orientation Abstract: In this research, the turbulent flow of a non-Newtonian nanofluid in a microchannel with a circular cross-section is simulated. First, the types of classification of microchannels, the methods of making microchannels, as well as the advantages and challenges of using microchannels are stated. ...
Field of study: Mechanics, orientation: energy conversion. The present research was conducted in order to investigate the movement of pig in pipelines. Due to the importance of pipelines in providing energy resources in the world, after installation and operation, the maintenance of these lines is of high importance, which has caused special attention to be paid to the design of ...
Dissertation for Master's Degree Abstract Achieving higher rates of heat transfer using different techniques that can result in saving a significant amount of energy and also lead to the production of more compact and cheaper devices with higher thermal efficiency has attracted the attention of researchers. Vortex generation is one of the best methods used to increase heat ...
Abstract: Research in the field of heat transfer of suspensions with nanometer-sized solid particles in the base fluid has started in the last decade. Recent research in the field of nanofluids has shown that the addition of nanoparticles causes a significant increase in the heat transfer of the suspension. Another common way to improve the thermal performance of devices is to ...
Dissertation for Master's Degree in Mechanical Engineering, Applied Design, Abstract: Microbeams are used as the main element in most sensors and actuators. In some cases, such as micro switches, this member may also be used in an environment containing fluid. Therefore, in this article, we analyzed the dynamic behavior and frequency analysis of a micro beam that is located in a ...
Master's thesis in the field of mechanical engineering (applied design) abstract of dynamics and adaptive fuzzy control of limited-time sliding mode of hexa-parallel robots using the synchronization error of the development and increase of industrial production and the subsequent economic and social growth of a society in the new century is tied to the automation of production ...
Submitted for Master's Degree Submitted for Master's Degree Abstract In addition to lateral instability, one of the major threats to passenger cars, especially SUVs, is the risk of overturning. In this thesis, a coordination strategy based on fuzzy logic is designed for the integrated operation of active steering, differential, brake and anti-roll bar subsystems. Separate ...
Master's Thesis on Energy Conversion Abstract: Increasing heat transfer as well as increasing energy efficiency due to the limitation of natural resources and reducing costs has always been one of the most basic concerns of engineers and researchers. This is especially important in fluids due to the small thermal conductivity coefficient. One of the most important ways to ...
Master's Thesis in Mechanical Engineering (Energy Conversion) Abstract Numerical investigation of the effect of microstructures on heat transfer and fluid mixing in microchannels, the need for high heat transfer from electronic packages and optical systems, etc., has created a challenge in the field of thermal management. In this context, microchannel heat wells play a great ...
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 companies accepted in Bo
Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 accepted companies
Thesis of master's degree in civil engineering, soil and foundation mechanics orientation, September 2019, abstract: analysis of dynamic interaction between soil and structure (due to the mutual effect of the structure and its retaining soil on each other), D
end Letter for receiving a master's degree (M.A.) in the field of business management, financial orientation, fall 2013. Abstract of this research is a group of items from the exploration of the basics of research evaluation regarding motivation.
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Dissertation for receiving a master's degree in the field of executive management, strategic management, June 2013. Abstract: The purpose of this research is to investigate the relationship between transformational leadership and organizational citizenship behavior of employees.
Dissertation for Master's Degree (M.A.) Field: Educational Sciences Orientation: Elementary Education Summer/ 2013 Abstract The purpose of this research is to investigate the role of electronic education classes
Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of
Dissertation for receiving Master's Degree (M.A.) Orientation: Business Management Summer 2019 Abstract Undoubtedly, organizational knowledge management in today's knowledge-oriented world is the key to success and pioneering. Rapid changes, relocation
Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils
Master's Thesis (M.A) in the field of architectural engineering for the academic year 2011-2018 Abstract: The similarity between cinema and architecture in terms of concept, idea development and the process of producing a work, can be read into these two artistic categories.
Master's Thesis Field: Executive Management Focus: Strategic Management Academic Year: 1389-1391 Abstract of Research Measuring market risk is a problem that has been on researchers' minds for a long time
Dissertation for Master's Degree in Public Management, Organizational Transformation Orientation Winter 1391 Abstract The current research aims to investigate the relationship between transformational leadership and Empowerment of psychology
Dissertation of master's degree in structural engineering February 2019 Chapter 1: Introduction 1-1. General, one of the most important natural events that always affects the lives of human beings
Dissertation for Master's Degree Orientation: Architecture, summer 2013, industrial life has created fewer places for people to rest and relax. for
Executive Management Master's Thesis Abstract In today's marketing, the cost of losing a customer is equal to losing the benefits of the service that customer needs throughout his life. Insurance can be considered as one of the vital economic arteries of any country. The main goal of insurance marketing management is to attract new customers and retain previous customers and ...
Dissertation for Master's Degree in Information Science and Epistemology Keywords: change management, preparation for change, library services, central library of Tarbiat Modares University, academic libraries Persian Abstract: Change means leaving one state and arriving and settling in another state. Today's organizations are facing wider changes than in the past in various ...
Master's Thesis in Curriculum Planning The present study was conducted with the aim of investigating the characteristics of peace education in the primary school curriculum from the perspective of teachers and experts. The descriptive research method is of the contextualization type. The statistical population of the research included all primary school teachers in the 2nd ...
Dissertation for Master's Degree in Educational Psychology (MA) Abstract The purpose of this research is to determine the effectiveness of psychological empowerment training on cognitive creativity and emotional creativity of students. The statistical population of this study consisted of all the female students of the third year of the first year of high school who were ...
Master's Thesis in Psychiatry Abstract The union of couples is an official social initiation, the continuation of which strengthens the foundation of the family. Nowadays, spouses benefit from interventions and specialized training in order to increase intimacy and improve marital relations. The general purpose of the current research is to investigate the effectiveness of group ...
Abstract: The aim of this study is the way of spending free time of Shahrized teachers with emphasis on sports activities and its relationship with job burnout in academic year 92-93. This research is of a descriptive and expressive type, and the method of collecting data and information, documentary and library studies and field studies, as well as the data collection tool, a ...