Download more than 100 examples of thesis, proposal and project topics about composite wind turbine in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Dissertation for master's degree in electrical engineering, power orientation Abstract: The use of renewable energy to produce electrical energy has increased increasingly with the expansion of the use of flexible alternating current transmission systems (FACTS), to compensate for the quality of power and voltage, the range of use of these energies has increased.
Master's thesis in the field of electrical engineering - power abstract of the possible analysis of dynamic stability of microgrids, considering wind turbines, in recent years, the high penetration of renewable energy sources, especially wind energy, in power networks has created new problems. One of the most important issues is the uncertainty in the power produced by wind ...
Master's thesis in the field of electrical engineering (power trend) Abstract of the investigation of transient electromagnetic states in wind turbines with the increasing development of wind turbines, increasing its efficiency has become more critical. One of the factors for measuring wind turbine efficiency is its performance in transient state problems. The phenomena that ...
Electrical Engineering Master's Thesis - Power Abstract Wind is a suitable and powerful source of energy. Power generation in a variable speed wind turbine is an interesting topic. Because in wind energy converter systems, maximum utilization can be achieved at any speed. But this system needs its parameters to calculate the optimal speed of the turbine. In this thesis, a ...
Dissertation for receiving a master's degree in the field of electricity - the tendency of electric machines. Abstract In this thesis, the behavior of the wind power plant is investigated using the detailed model of induction generator with two-way feeding. Electronic converters of the power plant and its control systems and the behavior of the power plant include electrical and ...
Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...
Dissertation for M.Sc. Mechanical engineering trend - applied design In this research, a wind turbine with a vertical axis of the Savonius model is modeled. The wind turbine has been modeled in the fluid control volume, which is the same as the wind tunnel in real conditions, and has been investigated under wind blowing with different speeds. Also, in terms of overlap ratio, it ...
Dissertation for the Master's degree ""M.Sc"" in Mechanical Engineering - Energy Conversion. Abstract In this thesis, experimental analysis along with numerical simulation has been carried out to investigate the performance of Savunius vertical axis wind turbine. In order to carry out the tests, the turbine was tested in the subsonic wind tunnel. In order to check the accuracy ...
Dissertation for obtaining a master's degree in the field of electrical engineering, power orientation Abstract Wind energy will be one of the important sources of electricity in future systems. In this work, an overview of wind energy power electronic control is provided and the development of modern power electronic components is also briefly reviewed. The application of power ...
Dissertation for master's degree in the field: Power Electrical Engineering Abstract Due to the extent and complexity of distribution networks, the probability of an accident occurring in them is very high, and the occurrence of an accident can affect many subscribers. Therefore, reliability is one of the key parameters determining the success rate of the system in providing ...
Master's Thesis of Electrical Engineering - Power Abstract: Induction motor condition monitoring is an absolutely necessary and important technology to detect various defects at the initial stage. which can prevent the spread of unexpected defects in the initial stages. Approximately 30-40% of induction motor defects are related to stator defects. In this thesis, a comprehensive ...
Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...
Master's Thesis in Electrical Engineering (M. S. C) Major: Power Abstract At present, fossil resources are rapidly running out, and with increasing concern about air pollution and global warming, experts are thinking of using cleaner energy sources and more compatible with the environment. Among these, wind power and solar energy are two types of huge renewable energy sources. ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
Dissertation for Master's Degree in Power Electricity Chapter 1 Overview of Wind Energy and Wind Turbine Preface Energy supply and demand in the world has become one of the most important issues of the day, so that the world will be seriously affected by it until the end of the 20th century and even after that. Fossil energies such as oil, gas and coal are facing a new big ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and location of storage of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program for the ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Master's Thesis in Electrical Engineering (M. Sc.) Power Orientation Abstract - Nowadays, due to environmental and economic reasons, the trend of using renewable energies, especially wind turbines, to produce electricity has increased in different countries of the world. On the other hand, the production power of wind turbines depends on the wind speed, and due to the ...
Master Thesis (M.Ss) Abstract The desire to use distributed generation (DG) resources is increasing day by day due to their numerous advantages. The disproportion between the consumption load and the production power will cause the power systems to be operated close to the corresponding nominal capacity, which will seriously aggravate this issue by using FACTS control tools with ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and storage location of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program of shared ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: During the last two decades, the electricity industry has undergone fundamental changes in the way it is produced, transmitted and distributed, which is referred to as restructuring. With the restructuring in the electricity industry, reactive power has been introduced as one of the most ...
Dissertation for master's degree in electricity, power orientation Abstract: The production of electrical energy for power systems with the aim of minimizing the total cost of production for active units in the power network is one of the most important topics for today's modern systems. In other words, the purpose of economic load distribution is optimal and appropriate ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for receiving a master's degree in the field of: Power Electricity, the increase in the presence of non-linear power electronic loads in distribution networks, on the one hand, and the ongoing changes in distribution networks, such as the presence of scattered production sources and the possibility of forming power microgrids [1], have increased the need for new ...
Abstract The reduction of fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids have increased the desire to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of microgrids. A set of small sources of energy production ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Master's Dissertation in Electrical Engineering (M.Sc.) Focus: Power Abstract Reliability in any system is a concept that refers to the safe and reliable operation of the system. Although this concept is undefined in most systems such as electrical, mechanical, pneumatic, etc., it is of interest to designers and consumers, but with the advancement of technology and the increase ...
Master's Thesis in the field of power, power electronics, power electronics, abstract. Distributed generation power plants have a production capacity of several kilowatts to 10 megawatts, which are used to produce electric energy in places close to consumers. Among their types, we can mention solar cells, fuel cells, micro turbines, wind power plants, etc. If these power plants ...
Master's Thesis of Power Electricity Abstract: Photovoltaic energy is one of the clean and efficient energies that is expanding rapidly. With the increase in the penetration percentage of these power plants in the power grid, problems arise that may lead to errors and problems in the distribution system. One of the problems that may occur is the issue of voltage increase at the ...
Master's Thesis in the field of Chemical Engineering (no orientation) Abstract of the laboratory study of the wear phenomenon of liquid containing sand in pipelines. The studied fluid consists of two phases, liquid and solid. The liquid phase is water, and sand particles form the solid phase. In this research, the parameters affecting the wear rate, including: fluid speed, sand ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...
Dissertation for Master's Degree (M.Sc.) Orientation: Power Abstract In recent years, with the advances made in data processing and transmission technology, distribution companies are more and more interested in using distribution automation systems. One of the most effective users of automation is the renewal of the distribution network, which is often analyzed as an ...
Dissertation for receiving a master's degree in the field of: Power Electricity Abstract The increase in the presence of non-linear power electronic loads in distribution networks on the one hand and the ongoing changes in distribution networks such as the presence of scattered production sources and the possibility of forming power micro-grids[1] have increased the need for new ...
Master's Thesis of Electrical Engineering - Power Abstract Microgrids are networks with small scales at the low voltage level, which are used to supply thermal and electrical loads to small places and places that do not have access to the main power grid. Microgrids are used to supply energy to all types of consumers such as household, industrial and agricultural, and their cost ...
Dissertation for Master's Degree Abstract Today, preventing losses caused by blackouts and undistributed energy is very important. Therefore, one of the most important issues in the operation of the distribution network is the renewal of the load, which has a great impact on the constant service to the subscribers. When a part of the network is cut off due to an error or ...
Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...
Dissertation for Master's Degree in Power System Abstract: The trend of reducing fossil fuel resources, adverse environmental effects and low efficiency of traditional power grids has increased the tendency to produce electricity near the load and the level of the distribution network using renewable sources. One of the basic solutions to solve the problems raised is the use of ...
Dissertation for receiving M.Sc degree in mechanical-structural engineering and the production of aluminide permeable coatings for the protection of gas turbines used in power plant, aviation, marine, oil and gas and petrochemical industries, which are mainly attacked by high temperature oxidation and hot corrosion phenomena. In this research, in order to use the effect of ...
Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...
A master's thesis in the field of electrical-power engineering. Time series load distribution. In this research, the application of time series models in the power system is discussed. Time series are used to model different power grid parameters and in various applications. These models are able to consider the time correlation of power grid variables. According to the modeling ...
Dissertation for the M.Sc. In the field of electrical engineering, power electronics, abstract: The material that is analyzed in this thesis in order to simulate and implement the buck converter nonlinear controller is presented in four chapters. In general, the buck converter and the relationships governing it and the studies conducted on the buck converter and a control method ...
Master's Thesis in Electrical Engineering (Power) Abstract Optimum placement of fault current limiters in microgrids in order to improve service continuity due to the increase in consumption demand and the ever-increasing penetration of scattered production sources into the power network, production and distribution systems are becoming more and more complex. Connecting these ...
Master's Thesis in the field of Mechanical Engineering - Energy Conversion Abstract Numerical investigation of fluid flow and heat transfer on mesh plates with cross holes under discontinuous suction Introduction 1-1- Fluid flow on mesh plates The urgent need of modern humans to use different fuels and the problem of environmental pollution caused by improper and indiscriminate ...
Dissertation for Master's Degree in Polymer Industry Engineering April 2013 Abstract Nowadays, the topic of energy and energy saving in all fields, even in homes, is one of the most important.
Thesis for obtaining a master's degree in industrial engineering, Fall 2012 Abstract During the past years, many efforts have been made to reduce the cost of transportation by using different models.
Master's thesis in electrical engineering, control trend, abstract of new methods of identifying errors in systems, such as the use of qualitative analysis of events, can lead to tangible and understandable results for everyone. The gas turbine system is one of the systems in which there is a possibility of many errors. And sometimes even modeling them with mathematical methods ...
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
M.SC Master's Thesis in Civil Engineering, specialization: hydraulic structures. Abstract Due to its special geographical location, Bandar Lange has been operating as a cargo and passenger transit station since the distant past. During the past years, this activity has raised expectations from it, so that its development plan has been implemented. Foresight in the development of ...
Dissertation of the master's course in electrical field (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are examined and the factors that cause them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, i.e. the ...
Master's Thesis (M.Sc.) Direction: Process Design Abstract Currently, membranes have found a special place in different separation industries and have wide applications in different fields of separation, including liquid solutions and different gases. Membrane technology is one of the most widely used technologies in today's industry, whose field of application is wide ranging ...
Doctoral Dissertation in Chemical Engineering-Biotechnology Abstract The purpose of this study was to produce polyhydroxyalkanoate biopolymer using glucose, fructose, molasses and whey carbon sources by microorganisms Azohydromonas lata DSMZ 1123, Azotobacterbeijerinckii DSMZ 1041, Cupriavidus necator DSMZ 545, Hydrogenophaga pseudoflava DSMZ 1034. In the first stage, to screen ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Master's degree thesis, field: Chemical Engineering Abstract: In this research, the absorption of methyl orange dye, which is one of the most widely used dyes in the textile industry, by polypyrrole adsorbent based on polyvinyl alcohol has been investigated. The tests were performed in a discontinuous system using a colored solution with a concentration of 40 ppm. After ...
Dissertation for Doctorate Degree in Dentistry Abstract The purpose of this study was to compare the microleakage of adhesive total etch and self etch using three methods of Fluid filtration, dye penetration and dye extraction, as well as to determine the statistical relationship between these three methods. Materials and methods In this laboratory study, 72 extracted human ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Introduction Engineers are always looking for better quality. In mathematics and computer science, it is the process of choosing or finding the best member in the sets of available options. Every process has the potential to be optimized and complex problems can be modeled as optimization problems in the fields of engineering, economic and business sciences. The goal of modeling ...
Master's Thesis of Polymer Industry Engineering Abstract With the progress of human civilization, technology development and the ever-increasing population, the world is currently facing a problem called pollution that threatens the lives of the inhabitants of the earth. Pollution caused by the accumulation of persistent toxic compounds in soil and water, such as chemicals, ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Dissertation for Master's Degree in Analytical Chemistry Abstract Nowadays, nanostructures have attracted the attention of many researchers due to their new features and applications in different fields and branches of science and technology. Meanwhile, nanocomposites, due to their unique physical and chemical properties, as well as potential applications in catalytic, ...
Dissertation for Master's Degree in Applied Design Mechanics Abstract: Composites have received a lot of attention in recent decades due to their high strength and low weight. Such materials can fail due to static, impact, dynamic loading, etc., and the various failures that occur can cause a severe drop in strength in the structure. Engineers always think of using different ...
Abstract In this research, the effect of different degrees of burial in windy sand on some physiological and vegetative characteristics of Qara Dagh and Rames species was measured. One-year-old saplings of Qarhadagh and Rames species were obtained from the nursery of the General Department of Natural Resources of Yazd province and subjected to five control treatments, burial ...
Dissertation for Master's Degree in Food Science and Engineering, Food Microbiology, Abstract: Today, the increase in environmental pollution and the decrease in oil resources have led to the development and replacement of biodegradable packaging instead of packaging derived from petroleum resources. Also, in this regard, the use of antimicrobial compounds such as silver ...
Dissertation for Master's Degree in Energy Systems Engineering Abstract Currently in Iran, there are many gas turbines producing electrical energy whose efficiency is around 30% to 40% depending on the environmental and functional conditions, in fact two thirds of this energy from fuel combustion is wasted through exhaust fumes and thermal waste. In order to increase the ...
Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...
Master's Thesis of Energy Conversion Mechanical Engineering Abstract In recent years, due to the importance of finding energy, global warming and environmental pollution and its production sources, and the growing need of various industries for various forms of energy, as well as the large volume of its consumers around the world, the need to provide models to optimize energy ...
Dissertation of the Master's course in the field of electricity (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are first examined and the factors causing them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of Gas Turbine Rotor Stress Analysis Using Continuous Damage Mechanics In this thesis, Lometer's unified model based on continuous damage mechanics is used to model the stress-strain behavior of a gas turbine rotor sample. The unified damage law, which is used to model creep-fatigue interaction, is based on the ...