Download the thesis about catalytic reformer✅ Word Document

Dissertation to receive a master's degree in the field of chemical engineering, thermokinetic orientation. Abstract With the increase in the use of fuel cells in the industry and as an on-site application, there is a need to develop production units on the site of hydrogen. In this research, a monolithic catalytic reformer in which autothermal reforming of methane takes place is ...

Thesis for obtaining a master's degree. Abstract: The increase in environmental concerns and the progress of green chemistry processes have necessitated the replacement of homogeneous catalysts with heterogeneous ones. In this research, activated carbon was used as a suitable substrate due to its special properties. The most important of these properties are resistance in acidic ...

Master's Thesis in Polymerization Engineering Abstract In this research, the thermal and catalytic pyrolysis of four types of polymers such as heavy polyethylene and polypropylene and two styrene butadiene rubber and polybutadiene rubber in a semi-continuous stirred reactor under nitrogen gas and using HZSM-5, FCC and H-Mordenite catalysts has been investigated. In this study, ...

Dissertation for Master's Degree (M.A.) Major: Industrial and Organizational Relationship between Emotional Intelligence and Job Satisfaction with Organizational Citizenship Behavior of Finance Employees of Fars University of Medical Sciences Abstract In this research, the effect of organizational citizenship behavior, emotional intelligence on job satisfaction of finance ...

In order to receive a master's degree in textile technology, it is essential to know the physical and mechanical properties of carpets to produce a quality product and maintain the proper appearance. In this research, an attempt has been made to provide a model to determine the relationship between the different parameters of these characteristics, therefore, to measure these ...

Dissertation for receiving a Master's degree (M.Sc.) specialization: Environment Abstract Gaseous liquids obtained from the refining of sour gases are also sour and contain a large percentage of hydrogen sulfide and mercaptans. Therefore, after distilling and preparing the products, it needs refining processes to remove or reduce the amount of sulfur and mercaptans present. ...

Dissertation for Master's Degree in Chemistry (Applied Chemistry - Polymer) Abstract: Ethylene polymerization was successfully performed in the presence of Phillips catalyst and in the slurry phase. In the continuation of the work, the effect of some effective parameters in polymerization, including the effect of trialkylaluminum, the effect of 1-hexane comonomer, the effect of ...

Dissertation for M.Sc degree, field: chemical engineering, orientation: biotechnology, research method: first, the surface of the gold electrode was coated with nickel and cobalt salt in suitable conditions, then the standard solution of atrazine poison was placed in contact with the modified electrode, and after optimizing a series of mechanical and chemical parameters, its ...

Dissertation for Master's Degree in Analytical Chemistry Abstract: Today, modern catalysts are used in the petrochemical industry for various reactions. Zeolites in the more advanced form of ""nano zeolite"" are very important in this regard due to their high surface area. The aim of this research is to provide a ""spectroscopy-chemimetry"" method and to provide an optimal ...

Dissertation of the Ph.D course in Chemical Engineering, Biotechnology, Abstract: Clostridium Langali is a highly anaerobic estogenic bacterium that can grow on synthesis gas components, i.e. CO and H2/CO2, and convert them into ethanol and acetate at ambient temperature and pressure. During this process, the bacterium shows a complex metabolic pathway that includes both ...

Master's degree thesis in the field: Chemical Engineering Abstract In this project, an attempt was made to take a small step towards the synthesis of silicoaluminophosphate molecular sieve in nano dimensions and its use in fuel cells with methanol fuel. Therefore, in this way, nano silicoaluminophosphate was produced under optimal hydrothermal conditions. Next, XRD, FT-IR, SEM ...

Dissertation for M.S.c Master's Degree Orientation: Applied Abstract: In recent years, semi-conducting nanoparticles have attracted a lot of attention due to their electrical and mechanical properties, which result from limited quantum effects compared to their counterpart materials. Among semiconductor nanoparticles, ZnO nanoparticles have higher efficiency. To achieve higher ...

Persian summary: Coumarin derivatives are of great interest due to their biological importance and medicinal activities. A number of coumarin derivatives, especially biscoumarins, are known to be anti-inflammatory due to their numerous and prominent features such as anti-blood clots. In this regard, one-pot synthesis of biscoumarin derivatives using aromatic aldehydes, ...

Medical Biotechnology Master's Thesis Background Abstract: Fibroblast growth factors (FGF) and their receptors (FGFR) play an essential role in the cell. Dysregulation of FGF/FGFR signaling pathways is associated with many abnormalities and cancer development. From this group, type 2 fibroblast growth factor receptor plays an essential role in cell signaling and regulation of ...

Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...

Dissertation for Master's Degree in Organic Chemistry. Summary of the research done in this thesis consists of two parts, the first part is the synthesis of the precursor of 4,5-dihydropyrrolo[1,2,3-hi]indole-1,2-dione (compound 1) and one-pot, three-component synthesis of new derivatives of spiro terecates in water-green solvent and in the presence of HMTA catalyst. The second ...

Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them

Dissertation for Master's Degree in Organic Chemistry Abstract: The new works carried out in this thesis include the condensation reaction of arylglyoxals prepared during the oxidation of acetophenones related to selenium dioxide with 1,2-diaminobenzene, 2,3-diaminomalonitrile, 2,3-diaminopyridine and 4-nitro-1,2-diaminobenzene in order to prepare quinoxalines and the ...

Dissertation for Master's Degree in Chemical Engineering, Biotechnology, Abstract: Microbial proteases are among the most important hydrolyzing enzymes, which account for 60% of the global market of industrial enzymes. In this research, synthesis of protease enzyme in solid state fermentation process using Bacillus bacteria. licheniformis was investigated. Various agricultural ...

Master's Thesis in the field of Nano Chemical Engineering Abstract Removal of phenol from industrial effluents using nanotechnology In this research, the photocatalytic removal of phenol as a model of organic pollutant in a fluidized bed reactor under ultraviolet and visible radiations has been studied. The effects of important parameters such as pH, catalyst concentration, ...

Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...

Dissertation for M.Sc. Degree: Food Industry Abstract: Pectinases are a group of hydrolytic enzymes that break down pectic substances. Exopolygalacturonase (exo-p) and endopolygalacturonase (endo-p) are two types of this group. In this study, two fungal species, namely Aspergillus niger and Vetrichodermarisi, which were able to produce pectinase, were isolated. The results of ...

Dissertation for M.Sc. Chemical Engineering-Environmental Engineering Abstract: Microbiological fuel cells (MFC) are considered as one of the important potentials in providing clean and renewable energy in the future. In addition to providing electrical energy, which is the most widely used and flexible among other types of energy, MFCs not only do not cause the slightest ...

Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...

Chemical Engineering Master's Thesis Abstract: In this research, a method for the synthesis of ZSM-5 nanozeolite was presented. Then this nanozeolite was modified with CTAB surfactant and its characteristics were investigated using XRD, FT-IR, and SEM methods. This nanozeolite was used to prepare a modified carbon paste electrode (SMNZ/CPE) to measure sulfate anion. Also, the ...

Dissertation for Master's Degree in Chemical Engineering Abstract According to reports, heterogeneous photocatalysts are suitable for photodegradation of polluting compounds. Many semiconducting metal oxides such as: TiO2, SnO2, ZnO2, etc. can be used as photocatalysts in water splitting reactions, synthesis of organic compounds and removal of wastewater pollution. synthesized ...

Dissertation for Master's Degree (M.Sc) Direction: Applied Chemistry Persian Summary According to international standards, the sulfur in the fuels used in the transportation industry, as one of the most important polluting industries, should be reduced to about 10 ppmw, while many refineries in the world produce fuels with a sulfur content of more than 1000 ppmw. One of the new ...

Dissertation for M.Sc Master's degree, specialization: process engineering, abstract of the proposed project, the feasibility of converting gas condensates into products with higher added value and consumable fuels such as gasoline. Considering the huge gas and oil reserves in Iran, this country is one of the major importers of gasoline. Therefore, it is very necessary to ...

Dissertation for Master's Degree (M.Sc.) Orientation: Environment Abstract Based on the studies conducted, there are various processes for desulfurization of naphtha, which determine the method of desulfurization of naphtha, there are very determining parameters, and the type of sulfur compounds and operating temperature and pressure are one of the most important parameters that ...

Master's Thesis Abstract In this project, the coat cracker unit of Abadan refinery has been simulated using Hysys refinery software. In simulating and receiving information, feed properties and solving mass and energy balance equations have been used. Simulation data and operational data of Abadan Cat Cracker unit have been compared. Also, by changing some important operational ...

Dissertation for Master's Degree in Medical Nanotechnology Abstract Choline is one of the constituents of phospholipids and plays an important role in fat metabolism. It is also necessary for the formation of acetylcholine, which is involved in the transmission of nerve impulses. Lack or increase of choline in the body causes complications and diseases in humans; Therefore, it ...

Dissertation for Master's Degree in Analytical Chemistry Abstract Nowadays, nanostructures have attracted the attention of many researchers due to their new features and applications in different fields and branches of science and technology. Meanwhile, nanocomposites, due to their unique physical and chemical properties, as well as potential applications in catalytic, ...

The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...

Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...

Master's Thesis in the field of Sufism and Islamic Mysticism Abstract The great mystics have played a role in the crucial stages of the social and intellectual life of Muslims; Perhaps the most important period that can be mentioned is the period after the Mongol invasion and the collapse of the Abbasid Caliphate. These mystics and mystics, despite all the criticisms, were able ...

Master's Thesis in Energy Systems Abstract Crude oil distillation unit is one of the most important and critical operational units of any refinery. This unit often requires revision in the design of the structure (Revamping) or making small changes in its existing condition without the need to reduce or increase the basic process devices (Retrofitting) in order to achieve higher ...