Download the thesis about building design✅ Word Document

Download more than 100 examples of thesis, proposal and project topics about building design in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 153 Category: Electronic Engineering

Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a certain location with a small number of channels (maximum 8 channels). Therefore, the ...

Number of pages: 101 Category: Electronic Engineering

Dissertation for obtaining a master's degree in electrical engineering, electronics, abstract. The many advantages of on-site calibration compared to calibration in the calibration center have led to the formation of mobile calibration teams in all companies that work in the field of calibration. Therefore, in recent years, the design of standards and equipment suitable for ...

Number of pages: 155 Category: Electronic Engineering

Master's degree in electrical engineering, electronics, abstract, accurate measurement and control of temperature in industrial and research systems is of particular importance, and the correct operation of some industrial and laboratory tools is possible only in a specific location with a small number of channels (maximum 8 channels). Therefore, the decision was made to build a ...

Number of pages: 186 Category: Civil Engineering

Expert thesis‌ Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures

Number of pages: 124 Category: Civil Engineering

Dissertation of master's degree in structural engineering, February 2011 Abstract: In the optimal civil engineering ­structure construction‌ for static loadings have been significantly developed. But, in

Number of pages: 135 Category: Civil Engineering

In order to receive a master's degree in civil-soil and soil engineering in March 2013, abstract, different methods are used to stabilize pits, among them nailing method and ink method.

Number of pages: 104 Category: Civil Engineering

Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N

Number of pages: 167 Category: Architectural Engineering

Dissertation for receiving a master's degree in architectural engineering, specialization: Architecture, July 2019. Abstract Children have a very special place in today's world, as far as the future of nations and their global position can be predicted based on the characteristics of their children. In advanced countries, educational methods are determined for the flourishing of ...

Number of pages: 214 Category: Architectural Engineering

Dissertation for receiving a master's degree in the field of architecture, Mehr 2013 Abstract: One of our needs today is to have a space to get acquainted with new architectural technologies in the world

Number of pages: 118 Category: Architectural Engineering

Dissertation for Master's Degree, Field: Architecture, Orientation: Architectural Technology, Spring 2014 Abstract With the formation of cities and the development of cities and communities, the needs and demands of people in the city

Number of pages: 115 Category: Civil Engineering

Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...

Number of pages: 163 Category: Architectural Engineering

Abstract Considering the sensitivity of the geographical location and the potentials in the Azad Qeshm Special Zone and the idea of ??improving the level of social interactions with other regions of the country and attracting domestic and foreign investors and improving the economic relations of the organization

Number of pages: 84 Category: Art - Graphics

Master's Thesis of Ardakan Faculty of Art and Architecture, Department: Carpets, November 2013 Abstract: Some contemporary (mostly commercial) carpets have defects in color, which are checked by a restorer upon the customer's request.

Number of pages: 137 Category: Architectural Engineering

Academic Thesis in Master's Degree in Architectural Engineering, First Semester of 1992-1993 Abstract: The purpose of this discussion is to examine the concept of cultural centers and the importance of its existence in the intellectual and moral education of young people, a large part of which

Number of pages: 196 Category: Architectural Engineering

Dissertation for receiving a master's degree (M.A) in the field of architecture – Architectural engineering trend spring 2014 Urban safety area, fire training centers are one of the most effective places in the three training departments

Number of pages: 147 Category: Facilities - Mechanics

Academic thesis for obtaining a master's degree in architectural engineering in March 2012 1-­ The first chapter (research plan) stating the problem of the relationship between man and nature is an attractive and interesting topic in M

Number of pages: 172 Category: Architectural Engineering

Academic Thesis in Master's Degree in Islamic Architectural Engineering, Summer 1993, Abstract of Historical Textures Considering that in the process of expanding cities from the past to the present, including the documented history of each period

Number of pages: 146 Category: Architectural Engineering

Dissertation for receiving a master's degree in the field of architecture, March 92, abstract Despite the fact that it has been several decades since the design and construction of residential complexes

Number of pages: 160 Category: Architectural Engineering

Master's Thesis, Architectural Engineering, Shahrivar 2013 Abstract: The issue is that the structure of neighborhoods in the contemporary era of Iran, due to changes in the form of contemporary urban development, including networks and

Number of pages: 89 Category: Architectural Engineering

Dissertation for Master's Degree Orientation: Architecture, summer 2013, industrial life has created fewer places for people to rest and relax. for

Number of pages: 182 Category: Architectural Engineering

Abstract Architecture, as a scientific-artistic profession, has always covered a part of human needs. After modernity and entering the industrial age in Iran, public buildings, especially markets, in urban scale

Number of pages: 174 Category: Architectural Engineering

Thesis (or dissertation) to receive the master's degree. In the field of architecture, the architectural trend of Bahman 93 abstract: Since the creation of multi-purpose and multi-functional spaces in

Number of pages: 120 Category: Geography - Urban Planning

Dissertation for master's degree in the Department of Geography and Urban Planning Abstract One of the phenomena that today's cities, especially large cities, are facing is the phenomenon of high-rise construction. The rapid and uncontrolled growth of the population in cities and the consequent need for housing on a large scale, on the one hand, and preventing the horizontal ...

Number of pages: 192 Category: Architectural Engineering

Dissertation for receiving a master's degree in architectural engineering, Bahman 1993, abstract of what should be considered in improving the quality of villages in our country today, determining the appropriate type of rural intervention based on specific characteristics.

Number of pages: 226 Category: Art - Graphics

Dissertation for Master's degree (M.A) Chapter 1 Abstract: This research, with the primary purpose of using light and water elements in the design of urban elements, has investigated these elements in the historical period of Iran, and also the design of furniture and urban elements has been examined from the perspective of identity and culture, and an attempt has been made to ...

Number of pages: 134 Category: Management

Master's Thesis of Faculty of Humanities, Department of Management Abstract Considering the importance of brands in creating value and increasing the cash flows of institutions, it is necessary for managers of units to pay special attention to this category and strive to form, create and maintain a brand that can meet the expectations of consumers, shareholders and other groups ...

Number of pages: 134 Category: Management

Master's Thesis of Faculty of Humanities, Department of Management Abstract Considering the importance of brands in creating value and increasing the cash flows of institutions, it is necessary for managers of units to pay special attention to this category and strive to form, create and maintain a brand that can meet the expectations of consumers, shareholders and other groups ...

Number of pages: 143 Category: Art - Graphics

Master's Thesis of Handicrafts Design and Production of Wooden Products Abstract Chair is one of the practical devices that people constantly deal with during the day due to its type of use and has always been the focus of artisans and designers. Therefore, motifs and symbols that have their roots in the valuable treasure of our traditional arts have the ability to be used in ...

Number of pages: 115 Category: Art - Graphics

Dissertation for master's degree in visual communication, the abstract of this research is descriptive-analytical, and its information is collected through library and field methods. One of the main elements of graphic design is the use of rich historical motifs, which can be effective in conceptually as well as expressing the identity of the artwork. Studies have shown that ...

Number of pages: 105 Category: Computer Engineering

Master's thesis in the field of computer engineering (artificial intelligence) abstract design and implementation of contradiction resolution in an intelligent assistant decision system based on the diversity of points of view, resolution of inconsistency is an important procedure in many intelligent systems, including law-based systems. This procedure determines the order of ...

Number of pages: 77 Category: Electronic Engineering

Master's Thesis in Electrical Engineering (M.Sc) Major: Electronics Abstract: The increase in demand for portable systems has led the electronics industry to pay special attention to power consumption as an important criterion. Adders are important elements in many digital systems. For this reason, various digital collectors have been proposed in the current era, each of which ...

Number of pages: 120 Category: Architectural Engineering

Academic Thesis for Master's Degree in Industrial Design Abstract Today, vandalism is observed in all societies. One of the examples of vandalism is writing memorials on historical and cultural monuments. The purpose of this research was to design urban furniture in order to prevent memorial writing on the wall of the theater in Tehran as a cultural monument. In other words, the ...

Number of pages: 165 Category: Art - Graphics

Academic Thesis for Master's Degree in Visual Communication Abstract: Today and in this competitive environment, branding for organizations has become a useful method and tool to communicate with customers. This means of communication has strategic advantages in creating continuity (continuous relationships), values ??and differentiation for the company in the long term. Visual ...

Number of pages: 106 Category: Civil Engineering

In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...

Number of pages: 116 Category: Architectural Engineering

Dissertation for master's degree in the field of visual communication, abstract in this research, which was carried out in a descriptive-analytical method, and its information was collected in a library and field method and was observed and compiled by being in the desired place, which aims to identify, expand, adapt and analyze the motifs of the two buildings of the Blue Mosque ...

Number of pages: 172 Category: Architectural Engineering

The academic thesis for obtaining a master's degree in the field of visual communication. Abstract Decorations in Iranian architecture have always been used as one of the methods of creating beauty by maintaining the unity of the whole in the same multiplicity of parts. Various types of decorations have been used in Iranian architecture. These decorations include various plant, ...

Number of pages: 192 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering - Marine Structures Abstract In this research, while using the results of SPT and CPT tests carried out in 4 different points of the Shahid Rajai Port Development Project site and using the methods of Seyed Idris and Robertson Ride, the liquefaction potential of the region is evaluated. Such an agent

Number of pages: 231 Category: Civil Engineering

Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...

Number of pages: 97 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Structures Chapter 1: Introduction-1-Introduction In recent years, the philosophy of traditional methods, which were based on the design of structures against natural hazards, has undergone major changes. Extensive destruction of structures designed on the basis of old regulations in recent earthquakes, advances in analysis ...

Number of pages: 137 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of civil engineering in the field of earthquakes. Abstract: The introduction of damage generators is very close to the concept of inelastic behavior and, as a result, hysteresis energy. Therefore, it can be said that the hysteresis energy at these levels can be a significant criterion for the design or control of the ...

Number of pages: 203 Category: Electronic Engineering

Master's Thesis of Precision Instrument Engineering and Industrial Automation in Oil Industries Abstract Non-linear dynamic systems face many challenges that must be investigated. Among these problems, we can point out things like extreme nonlinearity, changing operating conditions, dynamic uncertainty, both structured and unstructured, and external disturbances. Despite the ...

Number of pages: 126 Category: Civil Engineering

Dissertation for master's degree in the field: civil engineering, structural orientation. Abstract One of the phenomena that can occur during the design, implementation and operation of buildings is the phenomenon of progressive rupture. This phenomenon is defined as the spread of failure in a structure from one element to another in such a way that it eventually leads to the ...

Number of pages: 164 Category: Civil Engineering

Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...

Number of pages: 82 Category: Biology - Environment

Abstract Photovoltaic or PV for short is one of the types of electricity generation systems from solar energy. In this method, by using solar cells, direct production of electricity from sunlight becomes possible. Solar cells are semi-conductors that are made of silicon, the second most abundant element in the earth's crust. When sunlight shines on a photovoltaic cell, a ...

Number of pages: 66 Category: Electronic Engineering

Master's Thesis in Electrical Engineering (M.Sc) Major: Electronics Abstract: The increase in demand for portable systems has led the electronics industry to pay special attention to power consumption as an important criterion. Adders are important elements in many digital systems. For this reason, various digital collectors have been proposed in the current era, each of which ...

Number of pages: 77 Category: Electronic Engineering

Master of Electrical Engineering, Electronics, Abstract The many advantages of on-site calibration compared to calibration in the calibration center have led to the formation of well-equipped mobile calibration teams in all companies that work in the field of calibration. Therefore, in recent years, the design of standards and equipment suitable for mobile work has been given ...

Number of pages: 117 Category: Electronic Engineering

Dissertation for Master's degree (M.Sc) 1 Chapter 1: Overview of the design 1-1 Statement of the problem The complete automatic pilot system is a set of hardware and software that, while controlling the bird, provides the possibility of observing the position, speed and condition of the bird as well as passing the waypoints. Common systems usually include a position measurement ...

Number of pages: 110 Category: Electrical Engineering

Dissertation for M.Sc. The tendency of the abstract power transmission networks of modern power systems is increasingly changing due to the increase in demand and limitations in the construction of new lines. One of the consequences of such a stressed system is the risk of losing stability after a disturbance. Flexible alternating current transmission systems (facts) are very ...

Number of pages: 120 Category: Facilities - Mechanics

Dissertation for M.Sc Mechanical Engineering - Energy Conversion Trend Abstract In the last century, with the increasing demand for energy and the reduction of fossil fuel resources, the role of renewable energy in the progress and development of countries is not hidden from anyone. In the meantime, wind energy has a special share and has the highest growth rate among other ...

Number of pages: 137 Category: Facilities - Mechanics

Mechanical Engineering (Tendency to Energy Conversion) Abstract: Investigating the disadvantages of urban water supply networks (as an example of the Langrod water network) and optimizing and designing the optimal network for a specific region using the HBMO honey bee matching algorithm. Due to the global water crisis, today a special approach to the design and optimal use of ...

Number of pages: 418 Category: Librarianship

Executive Management Master's Thesis 1 Chapter 1 General Research 1-1 Introduction The necessity of globalization of companies and societies is an accepted and undeniable reality. In the current business environment, more than in any past period, the only thing that remains constant is the phenomenon of changes. The rapid and enormous changes of the last two decades in ...

Number of pages: 133 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.

Number of pages: 120 Category: Civil Engineering

Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely

Number of pages: 124 Category: Civil Engineering

Thesis - Master's Degree in Geophysics - Seismology 2012 Abstract Seismic hazard estimation to calculate a certain level of damage and vulnerability in the design of structures is one of the most important topics and principles of earthquake engineering, but

Number of pages: 123 Category: Civil Engineering

Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in

Number of pages: 172 Category: Management

Thesis of master's degree in business management, marketing orientation, summer 1991. Abstract: This research with the subject of "" Investigating the effect of social marketing factors on the value of the bank's brand name from the customers' point of view (Study

Number of pages: 140 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering/ Cold Water Engineering 1392 1-1- Introduction In this chapter, an overview of the concept of climate change and its causes and the effect of this phenomenon on natural resources and

Number of pages: 123 Category: Civil Engineering

Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers

Number of pages: 145 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase

Number of pages: 135 Category: Civil Engineering

Thesis for obtaining a master's degree in the field of civil engineering, oriented towards soil and foundation mechanics, Shahrivar   2013 Abstract Dams are always considered as infrastructure structures

Number of pages: 154 Category: Civil Engineering

Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance

Number of pages: 92 Category: Civil Engineering

Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty

Number of pages: 188 Category: Management

Dissertation for the Master's Degree (M.A) in Finance, Winter 2013 Abstract: In this research under the title « Investigation of human resource management on the financial performance of Melli Bank branches » that d

Number of pages: 100 Category: Civil Engineering

Thesis for receiving the degree of M.Sc. Trend: soil and soil in February 2013 Abstract: Allowed load capacity or safe load capacity is a virtual pressure that is within the range of

Number of pages: 169 Category: Civil Engineering

Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance

Number of pages: 170 Category: Civil Engineering

Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.

Number of pages: 235 Category: Civil Engineering

Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A

Number of pages: 108 Category: Civil Engineering

Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...

Number of pages: 112 Category: Nutritional Sciences

Dissertation of master's course in the field of educational sciences, history and philosophy of education, winter 93 Abstract: This research aims to analyze the content of moral concepts and themes in the Holy Quran and with the aim of

Number of pages: 121 Category: Educational Sciences

Thesis for receiving the master's degree in management (MA), focus: educational management, academic year 1391-1392, abstract of training and improvement of human resources as one of the strategies to achieve

Number of pages: 231 Category: Art - Graphics

Dissertation for obtaining a master's degree in the field of painting in February ???? Abstract Shahnameh Madhi is a Shahnameh that was prepared by Ottoman artists in the first half of the 17th century. Introduction of this K

Number of pages: 129 Category: Architectural Engineering

Thesis for receiving a master's degree in the field of architecture, architectural trend, autumn 2013, chapter 1- general 1-1- statement of the problem: Iran is a special example among other countries in terms of climate diversity.

Number of pages: 138 Category: Civil Engineering

Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils

Number of pages: 159 Category: Architectural Engineering

Thesis for receiving a master's degree in the field of architecture 06/93 abstract Today, as a result of the application of massification and downsizing policy in large urban societies, traditional housing has lost its meaning and concept

Number of pages: 231 Category: Architectural Engineering

Thesis­ academic certificate for obtaining the master's degree Major: Architecture, architectural trend, February 2013 Abstract of the influential role of therapeutic spaces and the environment in general, in the behavior and mood of Mes children

Number of pages: 229 Category: Architectural Engineering

Master's Thesis (M.A) in the field of architectural engineering for the academic year 2011-2018 Abstract: The similarity between cinema and architecture in terms of concept, idea development and the process of producing a work, can be read into these two artistic categories.

Number of pages: 248 Category: Management

Abstract of the thesis for obtaining a master's degree in the field of executive management in May 2013, every year a huge amount of the country's national capital is consumed in the form of building construction projects and related industries, it is necessary

Number of pages: 138 Category: Economics

The thesis of the master's degree course in the field of economic sciences, February 2013, is an abstract of the prediction of effective tools and solutions for the purpose of planning and compiling financial methods. Prediction accuracy is important

Number of pages: 127 Category: Urban Development

Thesis of master's degree in the field of economics in Islamic economics, February 2013, abstract of worn out fabrics and urban inefficiency are areas of the city that over the past years, its constituent elements, including