Download more than 31 examples of thesis, proposal and project topics about buckling braces in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation of master's degree in structural engineering February 2019 Chapter 1: Introduction 1-1. General, one of the most important natural events that always affects the lives of human beings
Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...
Master's thesis in the field of civil engineering, structure, first chapter: introduction 1-1. General One of the most important natural events that has always changed people's lives and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still have not ...
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Master's thesis in the field of civil engineering, structural orientation Chapter 1: Introduction 1-1. General One of the most important natural events that have always transformed human life and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still ...
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract In this research, the analysis of vibrations, buckling and wave propagation of wrapped nano beam under axial load on Pasternak substrate is discussed. First, the displacement and displacement field of the wrapped beam is obtained. Then, using the obtained displacement field, strain-displacement ...
Dissertation for Master's Degree in Applied Design Mechanics Abstract: Composites have received a lot of attention in recent decades due to their high strength and low weight. Such materials can fail due to static, impact, dynamic loading, etc., and the various failures that occur can cause a severe drop in strength in the structure. Engineers always think of using different ...
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Dissertation for Master's Degree in Civil Engineering, Structures Chapter 1: Introduction-1-Introduction In recent years, the philosophy of traditional methods, which were based on the design of structures against natural hazards, has undergone major changes. Extensive destruction of structures designed on the basis of old regulations in recent earthquakes, advances in analysis ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...
Dissertation of the master's degree in the field: civil engineering - structure, page 1-1-problem definition: In the science of structural engineering, there has always been an attempt to predict a set of events that will have a significant effect on the efficiency and endurance of the structure during its useful life. These factors should be considered by the design engineer ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Dissertation to receive a general doctorate, abstract, introduction and purpose, among the banding problems in orthodontics, is the creation of decalcified areas around the bands. On the other hand, during the treatment, the bands are prone to loosening and the cement used must have sufficient strength. Recently, new compounds containing amorphous calcium phosphate (ACP) have ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
Dissertation for Master's Degree in Mechanical Engineering, Manufacturing and Production, Abstract: The process of laser forming, especially in recent years, has been widely noticed. In this process, shaping is done by irradiating the laser beam on the surface of the sheet, which is accompanied by a rapid local heating and subsequent cooling of the heated area. However, the way ...