Download more than 79 examples of thesis, proposal and project topics about bending in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
To obtain a master's degree in the field of civil engineering - structural orientation. Abstract: The subject of this research is to investigate the level of performance and accuracy of methods based on non-linear static analysis and the need to retrofit steel buildings with a dual system of bending frame with cross brace and convergent 7-shaped brace designed with the 2800 Iran ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...
Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...
Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...
Dissertation for receiving a doctorate degree in the field of physical education, sports biomechanics, abstract: Osteoporosis is a skeletal disorder in which the mechanical strength of bones is reduced and leads to bone fractures, so it is important to pay attention to methods to maintain bone strength and prevent osteoporosis. The aim of this research was to determine the ...
Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase
Dissertation for obtaining a master's degree in civil engineering – Spring 2014 structure trend, first chapter, general research 1-1- Introduction: Mostly structures for severe earthquakes and surface acceptance
Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A
Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Dissertation of master's degree in structural engineering February 2019 Chapter 1: Introduction 1-1. General, one of the most important natural events that always affects the lives of human beings
Dissertation for Master's Degree (M.A) in the field of Physical Education and Sports Sciences - Sports Physiology. Abstract The purpose of this research was to investigate the physical fitness of the personnel of the Security Department of the Central Organization of Islamic Azad University and compare it with international standards. The statistical population included all ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
Master's thesis in electrical engineering, electronics major. Abstract: In this thesis, a method for identifying Persian vowels in monosyllabic words is presented. For this purpose, after separating the image frames and selecting the frames that were related to the pronunciation of the vowel in the monosyllabic word, as well as extracting the area around the lips, various ...
Master's Thesis in Civil Engineering - Roads and Transportation) Overview Pavements are usually affected by various factors that affect their life. Since a road passes through different areas where the subsoil, the type and volume of traffic and the climatic conditions of these areas are different from each other, therefore, various disadvantages and defects arise in different ...
Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...
Dissertation for Master's degree (M.Sc) Major: Painting Chapter 1: Overview of the design Introduction The exact speed of light is 299792458 meters per second. He directs the matter from the heavens to the earth, and then ascends to Him on a day that is as much as a thousand years from what you do (Surah Sajdah, verse 5) ""God governs the affairs of the earth from space and ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Master's Thesis of Electrical Engineering - Power Abstract: Induction motor condition monitoring is an absolutely necessary and important technology to detect various defects at the initial stage. which can prevent the spread of unexpected defects in the initial stages. Approximately 30-40% of induction motor defects are related to stator defects. In this thesis, a comprehensive ...
Dissertation for receiving a master's degree in the field of civil engineering in the field of earthquakes. Abstract: The introduction of damage generators is very close to the concept of inelastic behavior and, as a result, hysteresis energy. Therefore, it can be said that the hysteresis energy at these levels can be a significant criterion for the design or control of the ...
Master's thesis in the field of civil engineering, structure, first chapter: introduction 1-1. General One of the most important natural events that has always changed people's lives and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still have not ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Dissertation (or dissertation) for receiving a very good grade in the field of physical education and sports sciences, majoring in sports physiology. Abstract: The present study was conducted with the aim of determining the relationship between the level of physical activity, physical fitness factors and physical composition of female students of Al-Zahra Campus (Farhangian) ...
Dissertation for master's degree in the field: civil engineering, structural orientation. Abstract One of the phenomena that can occur during the design, implementation and operation of buildings is the phenomenon of progressive rupture. This phenomenon is defined as the spread of failure in a structure from one element to another in such a way that it eventually leads to the ...
Dissertation of the master's degree in the field: civil engineering - structure, page 1-1-problem definition: In the science of structural engineering, there has always been an attempt to predict a set of events that will have a significant effect on the efficiency and endurance of the structure during its useful life. These factors should be considered by the design engineer ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Dissertation for M.A. Master's Degree in Physical Education Major: Sports Physiology Abstract: The purpose of this research was to investigate the effects of a central body stability training program on posture control, dynamic and static balance of volleyball players. The statistical population of this research was volunteer male volleyball players aged 18 to 24 from Zanjan ...
Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...
Dissertation for the Master's Degree in Sports Physiology Abstract Growth hormone binding proteins with high absorption are converted by different mechanisms depending on the species. The purpose of this research is to investigate the effect of a session of resistance building activity on growth hormone response in male athletes and non-athletes. The current research is ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
An academic thesis for obtaining a master's degree in the field: physical education, specialization: exercise physiology of women suffering from occupational back pain. The statistical population of this study was working women suffering from back pain in Rasht, from which 50 people were randomly selected and divided into two experimental groups of yoga and massage and a control ...
A master's thesis in the field of electrical-telecommunications engineering (field) Abstract: Investigation of coupling effects in arrays of wire antennas for use in passive radar has always been concerned with detecting targets that are immune to visual vision. Electromagnetic waves can be used to identify targets. The first step to receiving waves is a suitable antenna array. ...
Physical education and sports science thesis for receiving a master's degree. M.A. Abstract The purpose of this research was to determine the effect of sports shoes and medical insoles on shooting on the feet in people with flat feet. For this purpose, 30 active students in the field of football with an average age of 16.16 years with flat feet were selected and participated in ...
Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...
Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...
Dissertation for Master's Degree in Physical Chemistry Abstract In this research, to evaluate the intermolecular potential energy level (IPS) of the F2-F2 system, the second virial coefficient of fluorine gas was calculated. The IPSs were obtained using the QCISD(T) level of theory and the cc-pVTZ-aug basis set. Calculations were performed in the temperature range of 100 to 600 ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract In recent years, most of the researches have been focused on compressive and combined loading in order to investigate the buckling of nanotube structures, and for this purpose, the work done on tensile loading is very limited. Since the results of compressive and tensile loading in carbon nanotubes are ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
Master's Thesis of Polymer Industry Engineering Abstract Phenolic resins have excellent dimensional, thermal, chemical and corrosion resistance. Also, the fugitives produced during the thermal degradation of this resin have low toxicity and, in addition, they have high charring. Phenolic resins, due to having desirable properties, are used in many fields such as internal parts ...
Dissertation for Master's Degree (M.Sc) Field: Horticulture Major: Ornamental Plants Abstract In order to investigate the effect of different waters on the life after harvesting of rose, chrysanthemum and gerbera cut flowers, a factorial experiment was carried out in the form of a completely randomized design in 3 replications with two factors: types of water (magnetic water, ...
Department: Plant Products Master's Thesis in Plant Products-Horticulture Abstract Rose (Rosa hybrida) is considered one of the most popular flowers in the world and its cut flower branch is the most used among other flowers. Due to the physiological reasons of being a rose cut flower, during its shelf life, it is highly susceptible to withering and reducing its freshness and ...
Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...
Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...
Dissertation for Master's Degree in Rock Mechanics Introduction Excavations made in rocks have different dimensions according to their purpose and vary from small dimensions to dimensions comparable to huge concrete structures. Surface excavations can be used as a space for extracting mines, creating buildings, and supporting and overflowing dams, factories, power plants, as ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
Dissertation for M.Sc Mechanical Engineering - Applied Design Orientation Abstract Bearings are widely used in various industries including automobile and aircraft industry. Therefore, it is important to check the bearings, therefore, in this research, the hardness matrix of the angular contact ball bearings has been investigated. In this research, the equations governing the ...
Master's thesis in the field of civil engineering, structural orientation Chapter 1: Introduction 1-1. General One of the most important natural events that have always transformed human life and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still ...
Master's thesis in the field of applied ethics Abstract Group work in research, like all other areas of human life, is mixed with ethical issues. The dynamics and reliability of research groups is one of the concerns of the scientific community, and ethical issues can be influential in this field. Promoting ethical values ??in research groups can have a significant effect in ...
Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...
Abstract: Spondylitis is one of the diseases affecting the spine, which damages the poultry industry worldwide and causes lameness in the bird. The main purpose of this study is to investigate the common microbial factors in spondylitis disease of broiler chickens, which was done through the cultivation of necessary samples in a number of special culture environments. For this ...
Dissertation for receiving master's degree in mechanical engineering, the trend of manufacturing and production of complex industrial products from metal pipes with the aim of increasing the strength-to-weight ratio of structures and especially reducing the fuel consumption of vehicles has attracted the attention of industrialists in recent years. In this regard, one of the new ...
Dissertation for Master's Degree in Mechanical Engineering, Manufacturing and Production, Abstract: The process of laser forming, especially in recent years, has been widely noticed. In this process, shaping is done by irradiating the laser beam on the surface of the sheet, which is accompanied by a rapid local heating and subsequent cooling of the heated area. However, the way ...