Download the thesis about beams reinforced with frp rebars✅ Word Document

Download more than 100 examples of thesis, proposal and project topics about beams reinforced with frp rebars in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.

Number of pages: 115 Category: Civil Engineering

Master's thesis in the field of structural civil engineering Abstract: Steel-reinforced concrete is a material that is widely used in civil engineering structures due to reasons such as suitable compressive strength, low cost of preparation and availability of raw materials. But reinforced concrete prepared from cement paste, ordinary aggregates, and steel rebars has weaknesses ...

Number of pages: 123 Category: Civil Engineering

Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in

Number of pages: 87 Category: Civil Engineering

Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field

Number of pages: 87 Category: Civil Engineering

Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...

Number of pages: 100 Category: Civil Engineering

Master's thesis in the field of civil engineering, structural orientation. Abstract In this study, the evaluation and comparison of nonlinear and numerical analysis of deep reinforced concrete beams with openings without reinforcement with deep concrete beams with openings reinforced with FRP sheets and deep reinforced concrete beams without openings by Abaqus finite element ...

Number of pages: 185 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...

Number of pages: 145 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering (M.Sc) Orientation: Structure Winter 2013 Abstract: Resilient construction of important government buildings, infrastructure facilities and vital arteries due to the increase

Number of pages: 145 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of Civil Engineering (M.Sc) Major: Structure Abstract: The retrofitting of important government buildings, infrastructure facilities and vital arteries due to the increase in terrorist attacks around the world and the possibility of bombings near buildings and urban places is one of the most important discussions in the ...

Number of pages: 117 Category: Civil Engineering

Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...

Number of pages: 164 Category: Civil Engineering

Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...

Number of pages: 169 Category: Civil Engineering

Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance

Number of pages: 110 Category: Civil Engineering

Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...

Number of pages: 86 Category: Civil Engineering

Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...

Number of pages: 147 Category: Civil Engineering

Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...

Number of pages: 124 Category: Civil Engineering

Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...

Number of pages: 107 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...

Number of pages: 186 Category: Civil Engineering

Expert thesis‌ Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures

Number of pages: 92 Category: Civil Engineering

Dissertation of master's degree in civil-structural engineering Abstract: Divergent bracing frames are considered earthquake-resistant systems for steel structures. These braces are from my difficulty

Number of pages: 109 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...

Number of pages: 105 Category: Civil Engineering

Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...

Number of pages: 127 Category: Civil Engineering

A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...

Number of pages: 133 Category: Civil Engineering

Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.

Number of pages: 120 Category: Civil Engineering

Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely

Number of pages: 123 Category: Civil Engineering

Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers

Number of pages: 170 Category: Civil Engineering

Dissertation of Master's Degree in Civil Engineering – Earthquake Engineering 2013 Abstract: Concrete beam and slab bridges with neoprene supports are among the most common highway bridges in the country.

Number of pages: 108 Category: Civil Engineering

Dissertation for master's degree in civil-structural field winter 2012 Abstract In recent years, the number of buildings that have suffered damage due to the loss of their gravity-bearing members has increased. Therefore, it has become important to design structures so that they are resistant to progressive damage in addition to the effects of earthquakes. One of the factors ...

Number of pages: 138 Category: Civil Engineering

Dissertation for M.Sc degree in soil and soil mechanics engineering, summer 2013, first chapter, introduction of micro candles 1-1 Micro-candles in general in dealing with problematic soils

Number of pages: 138 Category: Social Sciences - Sociology

A master's thesis in the field of women's studies, abstract of the representation of women in the cinematographic works of Dariush Mehrjooi, the place and position of women in the media can be explained under the title of the concept of representation. Historically, media content has been filled with images of women that have reinforced social and cultural norms of femininity ...

Number of pages: 186 Category: Psychology

Dissertation for Master's Degree in General Psychology Abstract: The purpose of this study was to investigate the relationship between emotional expression styles and control style in domestic violence against women with the role of gender stereotypes. The statistical population includes all women who referred to the forensic medicine of Alborz province in the city of Karaj in ...

Number of pages: 66 Category: Textile Industries

To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...

Number of pages: 129 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...

Number of pages: 83 Category: Civil Engineering

Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...

Number of pages: 153 Category: Civil Engineering

Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...

Number of pages: 175 Category: Civil Engineering

Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...

Number of pages: 158 Category: Civil Engineering

Dissertation for Master's Degree Abstract: Dealing with external forces such as earthquakes is one of the most important missions of civil engineers. In order to achieve this goal, the light metal frame system, which has advantages such as the possibility of industrial production, prefabrication and lightness, can be considered as a suitable alternative to traditional systems. ...

Number of pages: 155 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering, Structural Orientation Abstract: Today, due to the increasing space limitations and economic savings, it is inevitable to use diagonal bridges to avoid lengthening the route and increase road safety. The diagonal issue of the bridge will cause a different and sometimes complex behavior in the bridge under the effect of the ...

Number of pages: 94 Category: Civil Engineering

Master's Thesis in Civil-Soil Field Abstract Dense clay layers are used as one of the most common impermeable layers in most geotechnical structures such as earthen dams and municipal and radioactive waste disposal centers. Due to special geotechnical characteristics, these layers are damaged by cracking during their lifetime, these cracks increase the permeability of the layer ...

Number of pages: 231 Category: Civil Engineering

Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...

Number of pages: 144 Category: Civil Engineering

Dissertation for Master's Degree in Civil Engineering with Earthquake Orientation Abstract: Semi-rigid joints [1] are joints whose hardness is between the two states of grip and joint and transmit a part of the anchor, in other words, its degree of rigidity is between 20% and 90%. In this thesis

Number of pages: 174 Category: Civil Engineering

Dissertation for master's degree in civil engineering, structural orientation. Abstract: Today, in earthquake-prone countries, it is recommended to use a variety of energy-depleting tools in order to dissipate the energy of earthquakes on the structure. One of these tools is rotational friction dampers. Because the current regulations do not provide a value for the coefficient ...

Number of pages: 147 Category: Electronic Engineering

Master's thesis in medical engineering, bioelectrical trend, abstract of the separation of prosthesis projections and tissue implants in sinogram images of spiral CT scan using active contour methods for metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods, creates an artifact that appears as light and dark ...

Number of pages: 80 Category: Electrical Engineering

Dissertation for Master's Degree in Mechatronics Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a phase detector. Phase detector is a circuit whose average output voltage is linearly proportional to the ...

Number of pages: 165 Category: Civil Engineering

Dissertation for receiving a master's degree (Sc..M) field: civil engineering, specialization: structure, abstract: In recent years, the subject of seismic isolation has been particularly focused on the seismic design of buildings. The main purpose of this work is to isolate the structure from the ground instead of using conventional retrofitting methods The equipment used in ...

Number of pages: 143 Category: Civil Engineering

Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...

Number of pages: 81 Category: Electronic Engineering

Presented to graduate education management as a part of the educational activities required to obtain a master's degree, the dimensions of MEMS components according to Figure (1-2) include a wide range, from dimensions smaller than one micrometer that are not visible to the eye to dimensions of one millimeter, also types of these systems can be in a simple state, a tool without ...

Number of pages: 90 Category: Chemical - Petrochemical Engineering

Master's Thesis of Polymer Science and Technology Engineering Abstract Urethane-acrylate resins are of interest due to their low viscosity and flame retardant properties and relatively easy curing. On the other hand, natural fibers with renewable resources, low price, low density and high special properties have a special ability to be used in composites. However, their ...

Number of pages: 146 Category: Electronic Engineering

Master's Thesis of Medical Engineering, Bioelectrical Orientation Abstract: Separation of prosthesis projections and tissue implants in spiral CT scan sinogram images using active contour methods of metal implants such as prostheses and tooth filling materials during the reconstruction of CT images with different methods creates an artifact that appears as light and dark radial ...

Number of pages: 81 Category: Electronic Engineering

The thesis submitted to graduate education management as part of the educational activities required to obtain a master's degree in the field of mechatronics. Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a ...

Number of pages: 70 Category: Facilities - Mechanics

Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...

Number of pages: 76 Category: Facilities - Mechanics

Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...

Number of pages: 97 Category: Facilities - Mechanics

Thesis Mechanics to get a Master's degree Abstract: First, the solution of Volterra-type anti-plate displacement in a rectangular plate with limited length and width and different boundary conditions is obtained by the method of separation of variables. Then, the distributed displacement technique is used to obtain the integral equations related to the rectangular plate weakened ...

Number of pages: 82 Category: Facilities - Mechanics

Dissertation for Master's Degree in Mechanical Engineering, Applied Design, Abstract: Microbeams are used as the main element in most sensors and actuators. In some cases, such as micro switches, this member may also be used in an environment containing fluid. Therefore, in this article, we analyzed the dynamic behavior and frequency analysis of a micro beam that is located in a ...

Number of pages: 124 Category: Facilities - Mechanics

Presented to obtain a master's degree in the field of mechanical engineering-applied design orientation. Abstract In this research, we investigated the free vibration of a cracked beam and found its natural frequencies. In the first part, by using the open crack model, by modeling the cracked part as a beam-shaped element and satisfying the boundary conditions, we obtained the ...

Number of pages: 124 Category: Facilities - Mechanics

Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...

Number of pages: 125 Category: Facilities - Mechanics

To obtain a master's degree in mechanical engineering - manufacturing and production. Abstract: The electric discharge machining process is one of the advanced machining processes, which is one of the important applications of this process. Despite the unique applications of this machining method, low chipping rate, high surface roughness, high tool wear rate and environmental ...

Number of pages: 124 Category: Civil Engineering

Thesis - Master's Degree in Geophysics - Seismology 2012 Abstract Seismic hazard estimation to calculate a certain level of damage and vulnerability in the design of structures is one of the most important topics and principles of earthquake engineering, but

Number of pages: 104 Category: Civil Engineering

Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N

Number of pages: 104 Category: Psychology

Dissertation for receiving a master's degree (M.A.) orientation: general. Comparison of executive functions in patients with schizophrenia without psychotic symptoms, major depression without psychotic symptoms and normal people in Shiraz (2013). Abstract Various researches have proposed cognitive deficits as one of the important aspects of schizophrenia. In addition, the ...

Number of pages: 116 Category: Management

Dissertation for Master's Degree (M.A) in Industrial Management: Finance Abstract The importance of brand equity and branding has been emphasized in many scientific researches. Branding is done at both internal and external levels. External branding is related to external customers of organizations, and internal branding, which has been noticed with the emergence of the concept ...

Number of pages: 93 Category: Psychology

Dissertation for receiving a master's degree (M.A.) major: psychology and education of exceptional children Abstract of the thesis (including summary, objectives, implementation methods and obtained results): The present study compares perception and visual and auditory memory in educable mentally retarded girls with and without physical-motor disabilities in Tehran. 1391-92

Number of pages: 107 Category: Psychology

Dissertation for Master's Degree in General Psychology (M.A.) Abstract of the present study was conducted with the aim of comparing the psychological profile of parents with and without mentally retarded children based on Milon's multi-axis questionnaire. This descriptive research is causal-comparative. 50 parents of mentally retarded children of exceptional schools in Tabriz ...

Number of pages: 124 Category: Physical Education - Sports

Faculty of Physical Education and Sports Sciences Thesis for Master's degree Abstract: Background and purpose: The purpose of this study is to determine the effect of 8 weeks of intense training with and without water extract (red and black valelic) on plasma and liver neuropeptide w levels, cortisol and plasma T4 hormones in male rats. Materials and methods: In this ...

Number of pages: 90 Category: Physical Education - Sports

Master's thesis in the field of physical education and sports science, sports pathology, abstract background: in plyometric exercises, movements simulated with the main skills of the desired sport are used with the aim of increasing the player's power. The aim of this study was to evaluate the effect of 8 weeks of plyometric training with and without short hurdles on jump height ...

Number of pages: 159 Category: Civil Engineering

The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...

Number of pages: 125 Category: Physical Education - Sports

Physical Education and Sports Science Thesis for Master's Degree Abstract: Background and Objective: The purpose of this study is to determine the effect of 8 weeks of intense training with and without water extract (red and black oleander) on plasma and liver neuropeptide w levels, cortisol and plasma T4 hormones in male rats. Materials and methods: In this experimental study, ...

Number of pages: 140 Category: Civil Engineering

Master's thesis in the field of road, building and environmental engineering - hydraulic structures Abstract In this research, nonlinear wave differential equations are solved by the local RBF-DQ numerical method. These differential equations are in the form of Laplace's equation (as a governing equation) and nonlinear boundary conditions on the free surface; The basis of the ...

Number of pages: 44 Category: Medical Sciences

-1. Introduction Helicobacter pylori, which was originally called Campylobacter pyloridis, is a microaerophilic Gram-negative bacillus that is mostly found in the deep parts of the mucous gel covering the gastric mucosa or between the mucus and the gastric epithelium (1). This bacterium can produce surface factors that are chemotactic for neutrophils and monocytes and in turn ...

Number of pages: 90 Category: Physical Education - Sports

A master's thesis in the field of physical education and sports science, sports pathology, abstract background: in plyometric exercises, simulated movements with the main skills of the desired sport are used with the aim of increasing the player's power. The aim of this study was to evaluate the effect of 8 weeks of plyometric training with and without short hurdles on jump ...

Number of pages: 116 Category: Physical Education - Sports

Dissertation for Master's degree (M.A) Major: Sports Biomechanics Dissertation Abstract (including summary, objectives, implementation methods and obtained results): Research context: Naturally, with age, balance and walking control decline and lose their efficiency. Therefore, it is necessary to identify and introduce appropriate, safe and low-cost intervention solutions to ...

Number of pages: 81 Category: Medical Sciences

Dissertation for receiving a professional doctorate degree in the field of medicine Persian abstract Title: Comparison of the prevalence of obsessive-compulsive disorder in children with and without functional constipation referred to the pediatric clinic of Amirkabir Hospital in 2013 Introduction: Constipation in childhood is a common problem that causes discomfort to the child ...

Number of pages: 19 Category: Research Methodology

Mechanical Engineering Master's Thesis Proposed Design - Introduction The use of fibers in concrete started about 50 years ago and day by day their use in various fields has increased. Adding fibers to the mixing design improves the mechanical properties of concrete and the behavior of the structure after cracking. It also increases the softness and malleability of the section. ...

Number of pages: 77 Category: Facilities - Mechanics

Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...

Number of pages: 135 Category: Paramedical

Doctoral Dissertation for Doctoral Degree in Physiotherapy Abstract The aim of this study was to investigate the effect of cognitive load and walking speed on the variability and dynamics of intra-organ synchrony phase in young and elderly people with and without a history of falling. 30 young people and 32 elderly people (20 elderly people with a history of falling and 12 ...

Number of pages: 62 Category: Paramedical

Dissertation: To receive a professional doctorate degree in the field of medicine Persian abstract Title: Investigation and comparison of anxiety disorders in children with and without functional constipation referred to the pediatric clinic of Amir Kabir Arak Hospital Introduction: Functional constipation is a common disorder in children between 5 and 12 years of age. Based on ...

Number of pages: 55 Category: Educational Sciences

Dissertation for Master's Degree in General Psychology, Winter 2019. Abstract of the present research was conducted in order to investigate the effectiveness of emotion regulation training on the social competence of preschool children. In this research, an experimental design with an experimental and control group was used. The statistical population includes all preschool ...

Number of pages: 246 Category: Educational Sciences

Dissertation for Master's Degree (M.A.) Orientation: Educational Management Summer 2019 Abstract: The main purpose of this research is to evaluate the effectiveness of the special educational course while serving faculty speech writers.

Number of pages: 192 Category: Educational Sciences

Master's Thesis in the field of Educational Sciences, Educational Planning, 2013 Abstract The purpose of this research was to determine the feasibility of product-oriented skill training in the country, which seeks to answer three questions:

Number of pages: 131 Category: Educational Sciences

Dissertation for Master's Degree (M.A) in Educational Management Spring 2014 Introduction The basis of power and vitality in today's world comes back to the level of having science and knowledge. Today, the majority of the directions of the world are towards the production and development of science and technology, and developed countries are transitioning from industrial ...

Number of pages: 111 Category: Management

Dissertation for Obtaining an M.A. degree in the field of educational management in the academic year 1393-1394. Abstract: Recently, a new concept has been proposed in the theoretical foundations of management, which is called organizational maturity.

Number of pages: 107 Category: Management

Thesis of master's degree in seafaring, sea transport orientation (case study of Bandar Shahid Rajaei container terminal), February 2019, abstract in this research, the future scenarios of Bandar Shahid container traffic