Download more than 100 examples of thesis, proposal and project topics about axial turbomolecular pump in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Master's Thesis Applied Design Abstract In this thesis, in the field of vacuum technology, the importance, application and role of this technology in the industry and the advancement of scientific research, technical terms related to this technology, types of vacuum pumps, applications, advantages and disadvantages of each of the vacuum pumps, the importance of studying the ...
Master's Thesis (Civil Engineering - Water and Wastewater Engineering) Abstract: In this study, ram impact pump modeling was done by the software that was prepared. This software finds the outputs of the HAMMER software as input and by obtaining other information (including the pumping height, etc.) it calculates the amount of pumped water every time the valve is suddenly turned ...
Mechanical Engineering Master's Thesis - Applied Design Abstract Today, in various industries such as aerospace, atomic energy, chemical industries, refineries, petrochemical industries, etc., there is a need to use high-pressure mechanisms to enable the completion of relevant processes. The increase in pressure is done inside the cylindrical chambers and as a result, such an ...
To get a master's degree in mechanical engineering Abstract: Today, the use of aluminum and magnesium alloys in the automotive and aerospace industries is increasing due to the high strength of these alloys and their light weight. Since the forming ability of these alloys is low at ambient temperature, forming these alloys at high temperatures improves their formability. ...
Master's Thesis in Civil Engineering - Earthquake Engineering 1391 Abstract Structures with frames with coaxial braces are among earthquake resistant systems. These structures are widely
Doctoral dissertation in civil engineering – Earthquake Engineering 2013 Abstract The inappropriate performance of columns in concrete buildings designed and built in the past years causes concern and attention to the amount of A
Dissertation to receive a master's degree, specialization: civil engineering-water engineering Abstract: In this research, the effect of land slope, difference in height of pressure booster stations, height above sea level on the characteristics of the length of the water transmission systems in order to verify the feasibility and facilitate the prediction of its use and optimal ...
Master's thesis in the field of instrumentation and automation engineering in the oil industry, abstract modeling and non-invasive control of implantable blood pumps in the body for heart failure patients. Left ventricular assist devices (LVAD) are mechanical pumps that are surgically placed in the body of patients who are in the dangerous and final stages of congestive heart ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and location of storage of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program for the ...
Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...
Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...
Dissertation for receiving a master's degree in the field of structural oriented civil engineering, 2013, although the construction and design methods of structures have expanded over the years, but still the effect of earthquakes is one of the most important.
Dissertation for Master's Degree in Civil Engineering – Shahrivar Marine Structures, September 1992 Abstract: Pipe-in-pipe systems are widely used in transmission line applications.
Summer 1390 Expertise Master of the field: Civil Engineering Orientation: Structure Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers
Thesis for receiving a master's degree in the field of civil engineering with structural orientation in February. 2013 Abstract: In recent years, significant progress has been made in the field of improvement and resistance
Master's Thesis of Ardakan Faculty of Art and Architecture, Carpet Department (Primary Materials and Dyeing) Mehr 2013 Abstract: During the period of its use, the hand-woven carpet may be affected by various factors and conditions
Master's Thesis in Civil Engineering - Structural Orientation, February 2013 Abstract: The performance of a building during an earthquake depends on many factors, as a result, predicting the seismic performance of structures should be considered either explicitly or implicitly as part of the design or evaluation. Predicting the seismic response of the structure is very ...
Dissertation of master's degree in structural engineering February 2019 Chapter 1: Introduction 1-1. General, one of the most important natural events that always affects the lives of human beings
Dissertation for master's degree in the Department of Geography and Urban Planning Abstract One of the phenomena that today's cities, especially large cities, are facing is the phenomenon of high-rise construction. The rapid and uncontrolled growth of the population in cities and the consequent need for housing on a large scale, on the one hand, and preventing the horizontal ...
To receive a master's degree in polymer engineering - polymer industries, May 2013 abstract With the progress of various sciences and knowledge, the boundaries of knowledge have converged and in some fields we are witnessing
To receive a Ph.D. in the field of General Psychology Abstract Objective: This research was conducted with the aim of comparing the effectiveness and continuity of the effect of schema therapy and metacognitive therapy in a group manner on reducing symptoms, social health and quality of life of students with social anxiety disorder. Method: The current study was ...
Master's Thesis in Family Counseling Abstract: Objective: The present study was conducted with the aim of comparing resilience, marital instability and psychological well-being in two groups of mothers of normal and hearing-impaired children in Tehran using a quantitative-qualitative method. Method: In the quantitative part, using available sampling, a sample consisting of 100 ...
Dissertation for obtaining a master's degree in the field: Natural Geography Major: Climatology Abstract Floods are one of the natural phenomena that mankind has been witnessing since a long time ago. In Iran, due to the large area, multiple climates, and temporal and spatial density of rainfall in most watersheds, every year we see huge floods in most regions of the country. ...
Dissertation for Master's Degree in General Psychology (M.A.) Abstract of the present study was conducted with the aim of comparing the psychological profile of parents with and without mentally retarded children based on Milon's multi-axis questionnaire. This descriptive research is causal-comparative. 50 parents of mentally retarded children of exceptional schools in Tabriz ...
Dissertation for Master's Degree in Electrical Engineering, Power Systems, Abstract: In this thesis project, a new analytical approach is proposed for planning electric energy production and determining the amount and storage location of rotating storage corresponding to the risk level of subscriber load points through profit/cost analysis in the optimization program of shared ...
Master's Degree in Physical Education (Sports Physiology) Abstract Objective: The aim of the research was to determine the time-dependent effect of short-term intense interval training on the dynamics of oxygen absorption in girls. Methodology: For this purpose, 40 female students of Arak University with an average age of 25 ± 5 years, weight 54.30 ± 10.390 kg and height 162.5 ± ...
Dissertation for Master's Degree in Civil Engineering - Structures Abstract: One of the important problems in seismic design and implementation of buildings is the significant dead weight used in it. Therefore, in the case of using lightweight concrete that has favorable mechanical properties, significant benefits can be obtained, including a reduction in dead load and ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Master's Thesis (M.sc) Civil Engineering, Soil and Foundation Mechanics Abstract In this research, the stability of soil reinforced with geogrid located on an underground cavity was analyzed using plaxis software, and the effect of several factors such as the number of geogrid layers, the length of the geogrid layer, the stiffness of the geogrid layer, the optimal location of ...
Dissertation for receiving the master's degree ""M. Sc."" Field: Agricultural Engineering Major: Water Structures Abstract The sediment transfer process is a completely complex, variable and non-linear phenomenon. So that the behavior of the river in the sediment transfer capacity for a certain discharge is different in different times. Therefore, due to the complexity of the ...
Master's Thesis in Civil-Structural Engineering Abstract In order to estimate the capacity of buildings, it will be much easier and less expensive to use static methods instead of incremental dynamic methods. Although the incremental dynamic method gives more accurate and closer answers to the real behavior of the structure, its high cost and time has increased the desire to use ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Fine-grained clay soils have always caused problems in construction projects, one of the ways to improve the properties of problematic clay soils is to use lime to stabilize the soil. It swells. this
Dissertation for Master's Degree in Civil Engineering - Soil and Foundation Mechanics Abstract The purpose of this research is to improve the mechanical and geotechnical properties of windy sand soils. Because one of the major problems of windblown sand is its low resistance under natural and saturated moisture conditions, a laboratory study was conducted to investigate the ...
Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...
Dissertation for Master's Degree in Civil Engineering, Structural Orientation Abstract: Today, due to the increasing space limitations and economic savings, it is inevitable to use diagonal bridges to avoid lengthening the route and increase road safety. The diagonal issue of the bridge will cause a different and sometimes complex behavior in the bridge under the effect of the ...
Dissertation for Master's Degree in Civil Engineering - Marine Structures Abstract In this research, while using the results of SPT and CPT tests carried out in 4 different points of the Shahid Rajai Port Development Project site and using the methods of Seyed Idris and Robertson Ride, the liquefaction potential of the region is evaluated. Such an agent
Dissertation for Master's Degree in Civil-Structural Engineering Abstract In our country, most of the structures and maybe all the conventional buildings are analyzed and designed independently, which means that these structures are mainly analyzed and designed by conventional software and considering a rigid or articulated support, and then the forces obtained at the base of ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Dissertation for Master's Degree in Civil Engineering, Structures, Abstract: This thesis is the results of a numerical and parametric study on the effect of reinforcing reinforced concrete shear wall with FRP composite and applying the results of the finite element method. The finite element program is compared and calibrated against experimental data. Then, the numerical ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Master's Thesis in Civil Engineering-Earthquake Abstract Using braces as a lateral resistance system in steel structures is one of the most common methods to withstand the forces caused by earthquakes. One of the weak points of this system is the compression resistance of the bracing member and its buckling as a result of reducing the member's load. Today, this problem has been ...
Master's thesis in the field of electrical engineering (field) Abstract Analysis, simulation and construction of optimized microstrip antenna or metamaterial roll and use of particle aggregation optimization (PSO) algorithm Microstrip antennas are widely used due to their unique features such as reasonable manufacturing cost and low weight, especially in wireless systems. One of ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Dissertation for Master's Degree in Mechatronics Abstract In this thesis, a phase-locked loop is designed based on micro-electromechanical systems. The loop system has a feedback phase lock that compares the input phase with the output phase. This comparison is done by a phase detector. Phase detector is a circuit whose average output voltage is linearly proportional to the ...
Dissertation for Master's Degree in Civil Engineering, Structures Chapter 1: Introduction-1-Introduction In recent years, the philosophy of traditional methods, which were based on the design of structures against natural hazards, has undergone major changes. Extensive destruction of structures designed on the basis of old regulations in recent earthquakes, advances in analysis ...
Master's Thesis of Water Engineering - Water Resources Management Abstract The advance of salt water in fresh water aquifers is not limited to the islands and coasts of oceans, seas and salt lakes, but it is possible for salt water aquifers to advance through deserts, swamps and salt water pits in the adjacent fresh water aquifers, making it salty and unusable in critical ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Education Level: Master's Degree, Field: Civil Engineering, Major: Structures Abstract: In this thesis, the effect of nanosilica on the mechanical properties and durability of concrete containing polypropylene fibers was investigated. Polypropylene fibers with a length of 18 mm and a ratio of length to diameter of 0.9 mµ were used. The effect of fibers and nanosilica in three ...
Civil Engineering Master's Thesis - Soil and Foundation Mechanics Abstract From the past until now, one of the most economical methods to improve the mechanical properties of clay soils has been stabilization by means of additives such as lime and cement in construction projects such as road construction and consolidation of building foundations. Also, with the passage of time ...
Master's Thesis of Electrical Engineering - Power Abstract: Induction motor condition monitoring is an absolutely necessary and important technology to detect various defects at the initial stage. which can prevent the spread of unexpected defects in the initial stages. Approximately 30-40% of induction motor defects are related to stator defects. In this thesis, a comprehensive ...
Master's thesis in the field of electricity-power orientation Abstract Gearboxes are essential and inseparable components of power transmission systems. These machines convert torque into speed and sometimes speed into torque. The use of mechanical gearboxes in these systems has been common since long ago as an interface between the power generation sector and the power ...
Master's thesis in the field of civil engineering, structure, first chapter: introduction 1-1. General One of the most important natural events that has always changed people's lives and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still have not ...
Dissertation for Master's Degree in Civil Engineering, Hydraulic Structures, Abstract: It is obvious that water resources are essential for the life of living organisms and especially for human life. Drainers are a set of structures that are used to transfer water from the dam lake to the discharge point downstream. Therefore, due to the importance of this part of the dam, the ...
Master's thesis in the field of civil engineering, the trend of water engineering, which is used in various stages of the production of each product, is called virtual water[1] stored in the product. Many countries located in arid and semi-arid regions, by importing food, preserve part of the water needed for domestic production of products for use in other purposes. In this ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Master's thesis in the field of inorganic chemistry Abstract In this thesis, we investigate the anticancer diamine ruthenium complexes by computational chemistry, which examines the following: energy analysis, which examines the absolute energy value, dipole moment, isotropic and anisotropic polarizability of the complex. 2- The analysis of the frontal orbitals, the energy of ...
Doctoral Dissertation in the field of Civil Engineering - Water and Environment Abstract Network methods are among the most widely used groundwater modeling tools that have been widely spread and accepted in the last two decades. On the other hand, the advancement of computing power of computers and the ease of access to them have led to the rapid development of numerical ...
Introduction In today's era, the presence of waste materials resulting from various physical and chemical processes is one of the important problems of industrialized and developing countries. So that extensive research is being carried out for methods of recycling or disposing of them to minimize the damage to the environment. In this regard, construction researchers, like ...
Dissertation for receiving a master's degree in the field of civil engineering, structure orientation. Abstract: Today, many reinforced concrete structures that are in operation are more than 75 years old and have been damaged due to natural disasters such as earthquakes and wind, or due to material fatigue or corrosive factors. Maintenance of structures is very important due to ...
Master's thesis in the field of chemical engineering, abstract of the design of the Driso ring base and the use of hydrocarbon solvent in the dehumidification process in Farashband refinery, water vapor is one of the most important impurities in the flow of natural gas. Usually, the water vapor itself is not a problem, but instead the liquid or solid phase that forms when the ...
Dissertation (dissertation) to receive a degree... in the field of physical education and sports sciences, specialization in sports physiology. Therefore, the aim of this study was to investigate the effect of endurance, strength and parallel exercises on heart rate, systolic blood pressure, diastolic blood pressure, and PR interval in the workers of Pars Khodro Company. In ...
Master's thesis in the field of civil and environmental engineering. Abstract The main problem in using landfill biogas is the presence of pollutants such as hydrogen sulfide. Hydrogen sulfide gas is colorless, toxic, flammable, and has an unpleasant odor. It is highly toxic and produces SO2 when biogas is burned. In addition, hydrogen sulfide has a corrosive effect. It costs a ...
In order to obtain a master's degree in chemical engineering, abstract freezing of fans in operational units, including the hydrogen unit of Imam Khomeini Shazand Refinery in the cold seasons of the year is one of the important problems in this refinery. In order to provide a suitable solution to this problem, we must have a suitable estimate of the fan outlet temperature. The ...
Presented to graduate education management as part of the academic activities required to obtain a master's degree in the field of mechatronics. Abstract As you know, air conditioner is a high consumption device and has a Freon refrigeration cycle. What drew the companies to the production of inverters was to solve the shortcoming of air conditioners in high energy consumption. ...
Dissertation for Master's Degree in Chemical Engineering Abstract Paying attention to the issue of safety in industrial and chemical facilities is very important. According to the statistics, the amount of human, economic and environmental damages caused by industrial accidents every year in the world is very high. In addition, some of these damages are basically irreparable. ...
Master's thesis in the field of chemical engineering, abstract of the laboratory study of iron oxide production on a microstructural scale using the precipitation method with supercritical anti-solvent by: One of the problems of cement used in oil wells, which are used to connect wall pipes and well walls, is that these cements do not have the desired resistance against high ...
A master's thesis in the field of chemical engineering, abstract of the laboratory study and modeling of calcium carbonate production from calcium chloride solution by absorbing carbon dioxide from industrial exhaust gases, by the efforts of Amin Alamdari, the effect of carbon dioxide concentration on the precipitation of calcium carbonate species and the kinetics of calcium ...
Dissertation for receiving M.Sc degree) Major: Inorganic Chemistry Dissertation Abstract: We used Density Functional Theory (DFT) method at DFT/6-31G level to investigate the geometric structure, relative energies and electronic properties of possible protropic tautomers in Nexium, Protonix and Lamivudine. The structure and relative energies of tautomers in different solvents ...
Master's course in intensive care nursing Abstract Introduction: In the intensive care unit, ventilator-associated pneumonia ranks first among hospital infections. Since the role of nurses in preventing this complication is very important, the present study was conducted in order to compare the effect of two methods of face-to-face training and clinical guidelines for the ...
Dissertation for obtaining a specialized doctorate in oral and maxillofacial radiology Abstract: Introduction and purpose: The purpose of radiological evaluation of the temporomandibular joint (TMJ) is to depict suspected clinical disorders. This study was conducted with the aim of comparing the position and morphology of the condyle in symptomatic and asymptomatic patients with ...
Doctoral Dissertation Proposal Abstract Gaseous pollutants, including volatile organic compounds and aromatic substances, are very harmful and dangerous for the environment and human health. There are many methods such as physical methods, chemical methods and biological methods to remove gaseous pollutants. In the meantime, biological methods are more widely used due to their ...
Master's thesis in the field of chemical nanoengineering Abstract: Fabrication of ceramic nanofiltration membrane for chloride ion separation (case study: gas condensate) In this research, chloride ion separation using alumina-titania double layer nanofiltration membrane has been investigated. For this purpose, first, the alumina-titania double-layer membrane is made based on ...
Master's Thesis in Chemical Engineering (Process Simulation and Control) Abstract Modeling and Simulation of the Electrostatic Desalination Process of Crude Oil by Elham Ariafard The aim of this research is to model the desalination process of crude oil based on the population balance method. For this purpose, the one- and two-stage electrostatic desalination process, which ...
Dissertation for obtaining a professional doctorate degree in dentistry Abstract Introduction: One of the common causes of non-surgical root canal treatment failure is the inability to effectively treat all root canals due to the complex anatomy of the root canal system. Due to the fact that so far no comprehensive and extensive study has been conducted on the anatomy of the ...
Dissertation for Master's Degree in Power Electricity Chapter 1 Overview of Wind Energy and Wind Turbine Preface Energy supply and demand in the world has become one of the most important issues of the day, so that the world will be seriously affected by it until the end of the 20th century and even after that. Fossil energies such as oil, gas and coal are facing a new big ...
Master's Thesis in Electrical Engineering, Power 1-1 Introduction Energy supply sources in the last few decades have been from fossil sources, which until recently have been obtained almost cheaply. Cheap energy sources caused that the optimal use of energy and energy recycling were practically not paid much attention. Due to the energy shortage crisis and the sense of danger ...
Master's thesis in the field of chemical engineering without major. Abstract: Modeling, simulation and optimization of Jam Petrochemical Check Bed Reactor for hydrogenation of 1 and 3-butadiene. Therefore, a suitable kinetic model has been selected as a basic structure for modeling the reactor, and after that the presented model has been developed in order to match the molar ...