Download the thesis about amplitude of vibrations✅ Word Document

Master's Thesis in Mechanical Engineering, Applied Design, Abstract In this research, an analytical solution is presented to show the size dependence and the effect of temperature difference on nonlinear free vibrations and post-buckling behavior of microtubes containing current. Based on Euler-Bernoulli model, strain gradient theory, Couple's stress theory and von-Carman ...

The thesis for obtaining a master's degree in the field of mechanics, investigating and analyzing the free and forced vibrations of a multi-walled carbon nanotube placed in an elastic medium in order to achieve a clear mathematical understanding of the behavior of different walls of the nanotube under the influence of van der Waals forces and the elastic medium is one of the ...

Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...

Dissertation for Master's Degree in Civil Engineering - Earthquake Engineering Abstract The city of Birjand, as the capital of South Khorasan province, is located in the structural zone of Sistan, which is particularly sensitive due to its proximity to seismic and fundamental faults (Neh Khawri and Westi faults in the south, Ardkol fault in the northeast, Nawaz fault in the ...

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...

Dissertation for Master's Degree in Mechatronics Engineering Persian Abstract The purpose of this project is to introduce a new approach for troubleshooting gas transmission pipelines using mechanical waves, which is much cheaper and easier than other methods. who are currently working. These lines are usually located in difficult environmental conditions and far away and in ...

Presented to obtain a master's degree in the field of mechanical engineering-applied design orientation. Abstract In this research, we investigated the free vibration of a cracked beam and found its natural frequencies. In the first part, by using the open crack model, by modeling the cracked part as a beam-shaped element and satisfying the boundary conditions, we obtained the ...

Dissertation for M.Sc Master's Degree, Mechanical Engineering - Applied Design Abstract Modern wind turbines today tend to vibrate a lot due to their elastic, long and narrow structure. Therefore, all components of wind turbines should be subjected to vibration and modal analysis in the design stages, and their natural frequencies should be reviewed with turbine excitation ...

Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract In this research, the analysis of vibrations, buckling and wave propagation of wrapped nano beam under axial load on Pasternak substrate is discussed. First, the displacement and displacement field of the wrapped beam is obtained. Then, using the obtained displacement field, strain-displacement ...

Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...

Dissertation for Master's Degree in Mechanical Engineering (Energy Conversion) Abstract In this thesis, the mass and heat transfer of water-aluminum oxide nanofluid in a two-dimensional porous medium under a magnetic field and in the vicinity of a vertical wall has been investigated. The boundary wall can be permeable or impermeable. The concentration and temperature of the wall ...

Dissertation for obtaining a master's degree in civil engineering. 2013 Winter Earthquake Abstract of earthquakes close to the fault due to having pulse type movement with a long period at the beginning of the record, including

Expert thesis‌ Master of Civil Engineering, Structural Orientation, September 2013 Abstract Today, with the progress of science in the construction industry, many methods have been presented to improve reinforced concrete structures

The final performance (dissertation) to obtain the master's degree in the field of world music playing in July 2013. Abstract During the last years, many efforts have been made in the field of comparing the two instruments of violin and violin.

Dissertation for Master's degree (M.Sc) in the field of electrical-power engineering. Abstract In this thesis, the design of a resistant controller in power electronic circuit breakers and its comparison with linear control methods have been examined. The main goal of research and development in this field is always to find the most suitable control method in order to implement ...

Master's Thesis in Electrical-Control Engineering Abstract In this article, diagnosis, reconstruction and fault prediction of nonlinear systems with uncertainty are investigated. The diagnostic criterion is the residual signal calculated from the difference between the system output and a sliding mode viewer. The idea of ??sliding mode is to compensate the effect of ...

Dissertation for Master's Degree in Power Direction Abstract Transmission lines protected by distance relays have limitations in the presence of series compensation. When the fault loop includes a series capacitor, the impedance seen by the distance relay is reduced. The level of compensation at any moment depends on the number of capacitors connected at that time. Therefore, ...

Dissertation for Master's Degree in Artificial Intelligence Abstract In this thesis, we intend to perform classification on brain signals by presenting a suitable feature. For this purpose, first the noise of the recording device is removed from the brain signals, then the features are extracted from these signals using Walsh transform and entropy. After feature extraction, ...

Doctoral Dissertation of Soil and Foundation Mechanics Abstract In this research, the discrete element method was used to analyze the wave propagation and investigate the factors affecting the wave speed in granular soils. The method of separate elements is important due to the possibility of preparing completely similar samples and checking the effect of changes of a certain ...

Master's thesis in the field of civil engineering, structural orientation. Abstract: Investigating the effect of span length on bridge behavior under the simultaneous effect of horizontal and vertical components. Among all types of structures, bridges are one of the pillars of vital arteries that need to be used after an earthquake to provide access to hospitals, fire stations, ...

Dissertation for Master's Degree in Civil Engineering, Marine Structures, Abstract: Tension-based platforms are among economic marine platforms for use in deep waters. The correct prediction of the platform's dynamic response to environmental loads is very important in its economic and safe design. In this research, the dynamic behavior of the tension base platform under the ...

To obtain a master's degree in the field of civil engineering - structural orientation. Abstract: The subject of this research is to investigate the level of performance and accuracy of methods based on non-linear static analysis and the need to retrofit steel buildings with a dual system of bending frame with cross brace and convergent 7-shaped brace designed with the 2800 Iran ...

Master's thesis in the field of electrical engineering (field) Abstract Analysis, simulation and construction of optimized microstrip antenna or metamaterial roll and use of particle aggregation optimization (PSO) algorithm Microstrip antennas are widely used due to their unique features such as reasonable manufacturing cost and low weight, especially in wireless systems. One of ...

Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...

Master's thesis in the field of civil engineering, structure, first chapter: introduction 1-1. General One of the most important natural events that has always changed people's lives and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still have not ...

Dissertation for Master's Degree in Civil Engineering - Structural Orientation Abstract: The most basic goal in the seismic design of structures is to prevent the structure from collapsing during severe earthquakes, which is the basis of the governing theory of seismic behavior, the result of investigating the nonlinear behavior of the structure during an earthquake and the ...

Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power, high voltage, abstract. Inverters can produce single-phase and three-phase ac voltages from a constant or variable dc voltage. There are various methods to control the output voltage of the inverter, which is introduced in this thesis from an inverter system with solar panel input. ...

Dissertation for receiving the master's degree ""M.Sc"" orientation: abstract structure In today's reinforced concrete buildings, the use of interframe separators is very common. Intermediate frames with building materials are the main types of separators that are used in this type of buildings. In previous research, these interframe separators are usually considered as ...

A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...

Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protective CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...

Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...

Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy for uncertainty estimation. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a result, the volume of controller ...

Master's Thesis, Electrical Engineering, Power, Abstract: The sliding mode control method is one of the most important non-linear control methods, whose distinctive characteristics are insensitivity to parameter changes, complete rejection of disturbance, and dealing with uncertainty. This controller first brings the system from the initial state using the law of reaching the ...

Master's Thesis in Electrical-Control Engineering Abstract In this article, diagnosis, reconstruction and fault prediction of nonlinear systems with uncertainty are investigated. The diagnostic criterion is the residual signal calculated from the difference between the system output and a sliding mode viewer. The idea of ??sliding mode is to compensate the effect of ...

A master's thesis in the field of electrical-telecommunications engineering (field) Abstract: Investigation of coupling effects in arrays of wire antennas for use in passive radar has always been concerned with detecting targets that are immune to visual vision. Electromagnetic waves can be used to identify targets. The first step to receiving waves is a suitable antenna array. ...

Dissertation to receive a master's degree ""M.Sc"" in the field of electrical engineering, power systems trend Abstract Today, significant advances in semiconductor technology and the emergence of high-power switches that have the ability to be turned off by a control signal on the one hand and the better efficiency of multi-level converters compared to two-level converters on ...

Dissertation for receiving a master's degree in electrical engineering, electronics orientation. Chaos theory was founded at the end of the 20th century by Lorentz. Chaos science investigates non-linear systems and their behavior in different conditions. Since the systems around us are mostly non-linear, by creating feedback in them, they may show chaotic behavior, so chaos ...

Master's Thesis of Power Electrical Engineering Abstract The wide network of the power system has very expensive equipment, including generators, breakers, power cables and transformers. The power transformer is the beating heart of this network, which is always subject to various errors under the influence of operational and environmental conditions, and in some cases, it will ...

In order to obtain a master's degree in the field of mechanical engineering, energy conversion, abstract: In this thesis, the mass and heat transfer by integral method in the flow of natural displacement of a fluid with a very low frontal near the wavy inclined wall and under the magnetic field has been investigated. The wall is permeable and as a result, the fluid can be sucked ...

Master's Thesis of Mechanical Engineering-Applied Design Abstract In many applications, graphene (monolayer or multilayer) is used in the polymer matrix as a composite. In this research, ideal graphene with a hexagonal bond shape between atoms, located in a polymer matrix, with different boundary conditions, including gripped and simple, under biaxial external compressive ...

Dissertation for Master's Degree in Electrical Power Transmission lines protected by distance relays have limitations in the presence of series compensation. When the fault loop includes a series capacitor, the impedance seen by the distance relay is reduced. The level of compensation at any moment depends on the number of capacitors connected at that time. Therefore, for the ...

Master's Thesis of Electrical Engineering-Communications Wave Orientation Abstract In this thesis, identification of the position and shape of two-dimensional metal objects by optimization[1] of the cost function[2] with the help of the level setting method[3] and the simulation results are presented. In this method, we were able to obtain the shape and position of the objects ...

Dissertation for M.Sc. The tendency of the abstract power transmission networks of modern power systems is increasingly changing due to the increase in demand and limitations in the construction of new lines. One of the consequences of such a stressed system is the risk of losing stability after a disturbance. Flexible alternating current transmission systems (facts) are very ...

Dissertation for receiving a master's degree in the field of electrical power, power systems trend. Abstract: Reactive power compensation has always been one of the important research topics in most universities and research centers. Meanwhile, the new generation of compensators (FACTS) has been the focus of the power industry and research centers in order to control reactive ...

Dissertation for master's degree in Applied Design-Dynamics and Control Abstract: Transverse instability is one of the common problems in high-speed rail vehicles, which occurs on rails without arches and due to the friction-creep nature of wheel-rail contact that creates non-conservative forces in the system. This phenomenon is called hunting, which is a type of ...

Dissertation for M.Sc Master's degree, mechanical engineering-applied design Abstract With the emergence of composite materials, a huge progress was achieved in many engineering applications. Nevertheless, problems such as delamination, stress concentration, and discontinuous distribution of stress, the idea of ??creating a new type of composite materials in which properties ...

Master's thesis in the field of medical engineering Abstract of estimation of breathing rate from pulse oximeter signal of people suffering from sleeping sickness: review and comparison of different methods Pulse oximetry is a non-invasive and relatively cheap method for monitoring oxygenated hemoglobin in blood, which works based on the different light absorption of oxygenated ...

Dissertation for Doctoral Degree Abstract This thesis deals with uncertainty estimation in robust control of robotic arms and presents new methods based on voltage control strategy to estimate uncertainty. The voltage control method is much simpler compared to the conventional torque control method, because it does not require a complex non-linear model of the robot. As a ...

Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protection CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...

Master's thesis in the field of electrical engineering (field) Abstract Analysis, simulation and construction of optimized microstrip antenna or metamaterial roll and use of particle aggregation optimization (PSO) algorithm Microstrip antennas are widely used due to their unique features such as reasonable manufacturing cost and low weight, especially in wireless systems. One of ...

Master's thesis in the field of mechanical engineering - applied design approach. Abstract: Identifying the stiffness and damping coefficients of a beam support. By: Majid Abedi. Supports and connections play a fundamental and important role in engineering structures. It is necessary to identify different support parameters. Stiffness and damping parameters are the most ...

Dissertation for Master's Degree in Mechanical Engineering Field: Applied Design Abstract In this thesis, stability analysis of composite beam reinforced with carbon nanotubes on elastic support under axial force is investigated. The distribution of nanotubes is assumed to be uniform[1]. To determine the properties of materials reinforced with nanotubes, the results of molecular ...

Dissertation for Master's Degree in Mechanical Engineering, Applied Design, Abstract: Microbeams are used as the main element in most sensors and actuators. In some cases, such as micro switches, this member may also be used in an environment containing fluid. Therefore, in this article, we analyzed the dynamic behavior and frequency analysis of a micro beam that is located in a ...

Master's thesis in the field of civil engineering, structural orientation Chapter 1: Introduction 1-1. General One of the most important natural events that have always transformed human life and sometimes destroyed human civilizations by destroying buildings is earthquake. Therefore, humans have always tried to identify and deal with the dangers caused by earthquakes and still ...

Master's Thesis on Car Structure and Body Abstract In recent years, many researchers have allocated their attention to a special category of materials, memory materials. The ability to absorb and control vibrations actively or passively, respectively, is affected by the features of shape memory and hysteresis energy loss caused by the pseudo-elastic characteristics of these ...

Master's Thesis in Electrical Engineering - Power Abstract Nowadays, pulse width modulation techniques are widely used to control the output voltage and current of AC/DC converters. Among these methods, space vector modulation (SVM) has received a lot of attention due to its simplicity and favorable properties in controlling three-phase inverters digitally. The limitation of ...

Dissertation for receiving the master's degree ""M.Sc"" in the field of power electrical engineering Abstract Inverters can produce single-phase and three-phase ac voltages from a constant or variable dc voltage. There are various methods to control the output voltage of the inverter, which is introduced in this thesis from an inverter system with solar panel input. In this ...

Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 companies accepted in Bo

Abstract The main purpose of the research is to investigate the relationship between business strategy and profit quality in companies admitted to the Tehran Stock Exchange market. The statistical sample of the research includes 145 accepted companies

Dissertation for receiving the master's degree ""M.A."" Management Shahrivar 1390 Abstract The aim of the research is to investigate the effect of establishing the proposal system on the efficiency of Merck's professional response system

Dissertation for obtaining a master's degree (M.A) Business Management - Marketing Orientation Summer 2019 Abstract Considering the ever-increasing speed of changes and competition in the economic world, managers should have

Thesis for obtaining the master's degree (M.A.) (Trend: Human Resource Management Winter 1391 Abstract: Naza University

Master's Thesis in Accounting (M.A.) The disclosure of information is different in different companies. What is discussed in this research is profit prediction. Profit forecasting in Iran is done by managers. Considering the role that managers have in profit forecasting, in this research, the relationship between the manager's ability and the timing of the forecast disclosure, ...

Dissertation for receiving a master's degree, specialization: accounting, is an abstract of the present research and research work in order to determine the effective factors in the selection of accounting methods for the inventory of materials and goods and its effect on the quality of profitability of companies admitted to the stock exchange. This thesis prepares a framework ...

Dissertation for master's degree in accounting, accounting major. Abstract: The present research was conducted in order to provide evidence regarding the effect of ""privatization"" on the quality of profit of companies admitted to the Tehran Stock Exchange. The spatial domain of this research is Tehran Stock Exchange and its temporal domain is 1382 to 1392. In order to test the ...

Master's thesis in accounting, the present research was done to provide evidence to clarify the relationship between the quality of profit and the liquidity of stocks, as well as to evaluate the impact of the quality of profit on the liquidity of stocks. In this research, 96 companies admitted to the Tehran Stock Exchange in the 5-year period of 1387-1392 (with one year in ...

Thesis for the M.Sc degree in wood and paper industry engineering, Mehr 2013 Abstract: In this research, the physical and mechanical properties of nanocomposites obtained from cellulose nanofibers and poly polymers

Chapter 1 1-1-Introduction: Common fluids such as water, oils and ethylene glycol, which are usually used as heat transfer media, have a limited ability in terms of thermal properties, which is the first obstacle to compress and increase the efficiency of heat exchangers. One of the ways to improve heat transfer is to add particles to the fluid. This method is used for fluids ...

Master's Thesis in Accounting (M.A) Abstract In this research, the relationship between the joint board of directors, discretionary disclosures and profit quality in 57 companies admitted to the Tehran Stock Exchange from the beginning of 2015 to the end of 2010 is examined. In this research, stock volatility, joint management board and independent director are considered as ...

Abstract: In this study, the relationship between ownership concentration, company performance and dividend policy in companies listed in the food and pharmaceutical industries of the Tehran Stock Exchange has been examined. The statistical sample of the research includes 44 companies during the period of 1380 to 1387. The chosen approach for hypothesis testing is the ...

Thesis for receiving a master's degree in the field of educational management in the field of educational sciences. Abstract: The problem of many companies and educational centers today is the problem of human resources and the lack of proper efficiency of these forces in organizations. This research has been prepared for all industries, companies, organizations and educational ...

Dissertation for receiving a master's degree in the field of industrial engineering, Shahrivar's industrial trend. 2013 Abstract: Many economists consider agriculture as the driving force of economic growth.

Dissertation for master's degree in accounting research abstract: The purpose of financial reporting is to provide appropriate information for decision making by the users of financial information. Financial reporting may take the form of financial statements or other information transfer tools. Much of the information provided by financial reporting is based on predictions ...

Dissertation for Master's degree (M.Sc) Major: Accounting Abstract The main purpose of this research is to examine the relationship between stock liquidity and real profit management of companies listed on the Tehran Stock Exchange. The statistical population of the present research is the companies admitted to the Tehran Stock Exchange during the years 1382 to 1391, and the ...

Dissertation for Master's Degree in Accounting Abstract The purpose of this research is to re-explain the relationship between dividends and re-presentation of financial statements as a measure of profit quality. Specifically, this research focuses on conditions that can classify management's motivation in using accruals into two fraudulent and non-fraudulent groups. In this ...

Dissertation to receive master's degree in accounting. Abstract In the conditions of the realism of the presented financial statements, the profit based on the accrual accounting system should be able to reflect valuable information about the current situation and future prospects of the company to the market. In this case, the profit may reflect the personal interests of the ...

Master's Thesis in Clinical Psychology (M.Sc) Abstract Reading is the most basic learning tool for students. Dyslexia accounts for the largest percentage of learning disabled students, which is defined by the lack of success in language skills such as reading, writing and spelling. Memory, especially active memory, is one of the important factors in learning that these students ...

Master's thesis in the field of philosophy of education Abstract Study of professional ethics from the point of view of secondary school counselors The purpose of this research is to investigate the study of professional ethics from the point of view of secondary school counselors. This research was conducted in a qualitative paradigm using the dominant-less dominant model. In ...

Master's Thesis in Clinical Psychology Abstract: Objective: Social anxiety is a very debilitating disorder that can disrupt many aspects of a person's life. In this research, the researcher seeks treatment using neurofeedback methods and the presence of mind as new treatments in the field of psychology. Method: The design of this research is quasi-experimental with pre-test and ...