Download more than 44 examples of thesis, proposal and project topics about adhesive bonding in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for master's degree in civil engineering, structural orientation. Abstract Good bond strength between the old and new concrete surface is a key factor in the performance of concrete repairs. The purpose of this thesis is to investigate and evaluate the bond strength between the surface of the old concrete and the added concrete. In this thesis, a laboratory research ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Dissertation for receiving the degree of Doctor of Dentistry, Dental Materials Research Center Abstract Objective: One of the objectives of this study was to investigate the fracture resistance of the teeth coated with various crown and root restorations. Materials and methods: 60 freshly extracted human premolar teeth were selected and randomly divided into five groups of ...
Dissertation to receive master's degree in organic chemistry Keywords: Farsi: Besparash, condensation, composite, nanocomposite, anchoring Nitrogen in bonding with metals can destroy them
Dissertation for Doctorate Degree in Dentistry Abstract The purpose of this study was to compare the microleakage of adhesive total etch and self etch using three methods of Fluid filtration, dye penetration and dye extraction, as well as to determine the statistical relationship between these three methods. Materials and methods In this laboratory study, 72 extracted human ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Dissertation to receive a general doctorate, abstract, introduction and purpose, among the banding problems in orthodontics, is the creation of decalcified areas around the bands. On the other hand, during the treatment, the bands are prone to loosening and the cement used must have sufficient strength. Recently, new compounds containing amorphous calcium phosphate (ACP) have ...
Dissertation Chemistry for Master's Degree Abstract Acrylic-based pressure-sensitive adhesives are more expensive than rubber-based adhesives, but they have a longer life and resistance to high temperatures, chemicals, UV rays, solvents, light, softeners, and the environment. Modification of acrylic pressure-sensitive adhesives is useful for improving adhesion properties. In ...
Dissertation to receive a master's degree (M.A.) major: Curriculum planning Abstract of the thesis (including summary, objectives, implementation methods and results obtained): The present research seeks to examine the components of professors' professional ethics. Since educational environments, especially universities, play an important role in the education of individuals and ...
The abstract of the present research has studied the extent and manner of representation of national identity in the 21:00 detailed news section of the first channel of Sima using the method of categorical content analysis. The first channel of Sima is a national network and can be found all over the country, and its detailed news section at 21:00 is one of the late and popular ...
Master's thesis in the field of educational sciences, history and philosophy of education. Abstract: This research was conducted in order to analyze the content of moral concepts and themes in the Holy Quran and with the aim of presenting a model of the educational moral system based on the moral concepts of the Quran. In this study, descriptive, analytical, and inferential ...
Dissertation to receive the master's degree ""M.S.c"" specialization: Textile chemistry and fiber science Abstract: One of the important processes in the completion of textile goods is the underhand improvement in textiles. Finishing the softener provides a desirable softness to the fabric and improves its properties, and the main goals of the softener are to reduce static ...
To receive a master's degree in textile technology engineering. Abstract In the previous research, multi-sized nano-roughness was developed using nanoparticles with different sizes and different surface charges along with silicone resin coating to produce multi-purpose textiles with stable properties. In this research, the idea of ??using laser irradiation and finishing textiles ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Master's thesis in the field of civil engineering, structure orientation. Abstract: In this study, the effect of some effective parameters on the strength of polymer concrete based on epoxy resin, including hardener, filler, and solvent, has been investigated. Rice husk ash and broom stalk ash were used as fillers and acetone-toluene mixture with a ratio of 50-50% was used as a ...
Master's Dissertation of Discontinuous Structure Abstract: In recent years, the use of composite material in the construction and strengthening of structures has expanded greatly. The structure of this material is such that there is a possibility of crack formation between the layers. Due to the increase in load, these cracks grow and cause a sharp drop in the strength and ...
Dissertation for Master's degree (M.A.) Major: Financial Management Abstract The purpose of this research is to investigate the factors affecting the job satisfaction of employees of National and Pasargad Banks. The research method is descriptive-survey and a researcher-made questionnaire with a reliability of 0.86 was used to collect information. The statistical population of ...
Master's thesis in the field of civil engineering, soil and foundation, in this research, the bearing capacity of the conical pile group and the cylindrical pile group with the same volume are calculated and compared. Due to the lack of numerical studies and modeling by software for conical piles compared to laboratory tests in this field, in this research, the modeling of the ...
Dissertation to receive a master's degree in the field of Analytical Chemistry, Abstract Biosynthesis of gold nanoparticles with small size and biological stability are very important and have various biomedical applications. In this work, an easy and simple method for the green synthesis of gold nanoparticles using willow tree bark extract is reported. The bark of the willow ...
The first chapter of the project title: The effect of infant massage on the amount of father-infant attachment - a randomized controlled clinical trial Statement of the problem Research on fetuses and newborn animals has shown that unusual sensory experiences (both overstimulation or overprivilege) can affect brain development. Touch sensitivity starts from the 7th fetal week ...
Master's Thesis / Inorganic Chemistry Abstract Considering the application of nonlinear optical properties (NLO) in technologies such as lasers, remote communication, photovoltaic cells, information processing and holography and the mineral diversity of these materials, we started a research in this field and focused on borazine-containing dyes. Our main goal in this research is ...
Dissertation for Master's Degree (M.Sc.) Field: Gas Processing and Transmission Engineering Abstract: Today, one of the problems in gas transmission lines is the gas hydrate phenomenon, which is a combination of light gases such as methane, ethane or carbon dioxide with water molecules under certain temperature and pressure conditions to form an ice-like substance that contains ...
Master's Thesis in Chemical Engineering Abstract of Electrochemical Analysis of Formaldehyde Formaldehyde is one of the organic chemicals that is widely used as a raw material in many industries. Industrial effluents that contain high concentrations of formaldehyde must be treated before entering the environment due to its possible carcinogenic and mutagenic risks. The purpose ...
Master's thesis in the field of mining chemistry Abstract: In this study, the effect of amide substitution on the surface of graphene oxide was studied. Two amines were chosen to change the contact surface and absorption rate. of a linear diamine such as ethylenediamine[1] and cyclic amine 6-aminouracil[2] with two different characteristics were evaluated. After the synthesis ...
Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protective CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...
Academic thesis for obtaining a master's degree in electrical engineering, electronics orientation Abstract In this thesis, firstly, the introduction of graphene, its manufacturing method, advantages and applications in field effect transistors and the conducted research will be extracted and examined, then we will have an overview of the structure of field effect transistors ...
Thesis for master's degree in the field: chemical engineering Abstract Hard polyurethane[1] is always considered one of the most effective and practical polymers in various industries, especially the coating industry. Excellent adhesive property, curing ability at ambient temperature and corrosion resistance of this polymer are some of its remarkable features. This study was ...
((Master's Thesis)) Abstract Introduction: Helicobacter pylori is one of the most important human stomach pathogens. BabA2 Hpa HsP genes are essential in binding to gastric epithelial cells and bacterial pathogenicity. The frequency of these genes is different in different geographical regions. The aim of this study was to evaluate the frequency of BabA2, Hsp Hpa genes in ...
Background and objectives: Plank is a relatively common inflammatory disease with an unknown etiology, and especially its ulcerative type is known as a premalignant disease. But despite this, there is still no known treatment for it. One of the new drugs that has attracted the attention of some researchers is Mycophenolate Mofetil (MMF). The effect of this drug orally on some ...
Master of Chemistry (Chemistry-Physics) Abstract In the present work, the theory of stable structures, bond energies and interactions in H2SO4...HNO...(H2O)n clusters (n = 0-2) were studied at the MP2/aug-cc-pVDZ computational level. The presence of one and two H2O molecules strengthens the interaction between HNO and H2SO4 molecules, and this indicates the positive role of H2O ...
Doctoral thesis in the field of chemical engineering. Abstract The study of the effective parameters in the synthesis of silver nanoparticles by the inverse microemulsion method of metallic silver nanoparticles is of interest due to their use as catalysts, antimicrobial agents and biosensors. The practical use of silver nanoparticles is highly dependent on the size distribution ...
Master's Thesis of Chemical Engineering-Biotechnology Abstract The deteriorating energy sources of fossil fuels will make the developing human society suffer from fuel shortage in the not too distant future. As a result, the concerns of the continuous and increasing release of carbon dioxide into the atmosphere, as well as the extent of pollution caused by fossil fuels that have ...
Master's thesis in the field of chemistry, mineral orientation Abstract: Synthesis and identification of the symmetric bis((E)-2-nitrophenylallylidene)-2 and 2-dimethyl-1,3-diamine propane ligands with the general formula MLX2, where M represents zinc (II), cadmium (II) and mercury (II) metals and X includes chloride, bromide, iodide, It is thiocyanate and azide, it was done. To ...
Dissertation for Master's Degree in Chemistry, Chemistry, Abstract: Epoxy resins, which are thermosetting polymers, have properties such as high thermal stability, good adhesion, high chemical resistance, easy molding, and moisture resistance. These resins are used as adhesives, coatings, paints and polymer tools. The most common epoxy resin is prepared from the reaction of ...
Dissertation for receiving a master's degree in applied chemistry, Persian abstract. In this research, graphite particles were converted to graphene oxide by Hammer's method. Graphene nanoparticles are one of the best and most effective absorbent materials that have been produced so far. Graphene is one of the successful allotropes of carbon in the field of drug absorption and ...
Dissertation for Master's Degree in Analytical Chemistry Abstract Nowadays, nanostructures have attracted the attention of many researchers due to their new features and applications in different fields and branches of science and technology. Meanwhile, nanocomposites, due to their unique physical and chemical properties, as well as potential applications in catalytic, ...
Master's Thesis of Electrical-Communication Engineering Abstract Production and amplification of radio frequencies [1] is the heart of satellite communication and optical electronics applications. The telecommunications industry is looking for smaller and more efficient RF amplifiers at higher frequencies. Nanostructures meet these needs due to their unique characteristics. In ...
Master's Thesis in Electrical Engineering, Power Orientation Abstract In this thesis, while investigating the phenomenon of saturation in protection CTs, the problems related to the detection of this phenomenon and the compensation of CT secondary current have been discussed, and in order to solve the problems raised, methods have been introduced and the results have been ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Dissertation for master's degree in mechanical engineering, construction and production trend. Abstract One of the important topics in the field of welding in engineering structures is the discussion of reducing residual stresses in welding lines and improving the quality of welding. Residual stresses reduce the load bearing limit, the life of welded joints and change the forms ...
Dissertation for M.Sc degree, specialization: manufacturing and production, abstract in this thesis, how to improve the properties of plastics with the help of heat treatment. First, we will talk briefly about polymers, plastics and their sub-branches and heat treatment on them, and then we will discuss the effect of annealing heat treatment on heavy polyethylene sheets that are ...
Master's Thesis in Mechanical Engineering - Energy Conversion Abstract The vortex tube is a simple mechanical device that has no moving parts and is one of the equipment used in the refrigeration system, in which a high-pressure fluid enters the vortex tube through the inlet nozzles and splits into two streams with a lower and higher temperature than the inlet temperature, thus ...