Download more than 83 examples of thesis, proposal and project topics about abiotic stresses in editable WORD file format at undergraduate, graduate and doctoral levels for use and reference in research, articles, theses, student and academic projects.
Dissertation for Master's Degree in Agricultural Biotechnology Keywords: two-dimensional electrophoresis, sodium chloride stress, wheat Abstract: Wheat (Triticum aestivum L.) is one of the oldest and first crops that has played an essential role in human nutrition as a raw material for making bread. Considering the population growth and the increasing need for agricultural ...
Master's thesis in the field of agriculture, plant breeding, abstract. After drought stress, salinity stress is the second limiting factor for the performance of agricultural plants at the global level. Based on the division of plants in terms of tolerance to salinity stress, sorghum is placed in the semi-tolerant class, and its salinity tolerance threshold is 4.9 to 6.8 ...
Abstract: Salinity stress is one of the most important abiotic stresses in the world, and its negative effects on the growth of agricultural plants have led to an increase in research on salinity tolerance with the aim of improving plant tolerance. In addition to increasing growth, potash fertilizers help to improve product quality and increase plant resistance against adverse ...
Master's thesis in the field of forestry Vegetative, physiological and genetic responses of two Zagros oak species (Q. brantii and Q. libania) under drought stress Abstract Zagros forests account for about 40% of the total forests of Iran and have the greatest impact on water supply, soil conservation, climate adjustment and economic-social balance in the whole country. These ...
Dissertation for the M.Sc. Field of agriculture, the effect of water stress, zeolite and salicylic acid foliar spraying on some agronomic and physiological traits of spring safflower 1: General: 1-1: Introduction: Environmental stresses are the most important factors that reduce the yield of agricultural products in the world. If environmental stresses did not occur, the actual ...
Master's Thesis of Structures Abstract In the welding process, after a stage of cooling of the body, due to the uneven distribution of temperature, stresses remain in it, which are called residual stresses. To obtain these stresses, the temperature history of the object during the welding process must be available. For this purpose, first a thermal analysis is done to obtain the ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of three-dimensional interlayer stress investigation in mechanical connections in layered composite materials The purpose of this thesis is to investigate three-dimensional interlayer stresses in mechanical connections in layered composite materials. For this purpose, finite element method and ABAQUS software ...
Dissertation for master's degree in mechanical engineering, construction and production trend. Abstract One of the important topics in the field of welding in engineering structures is the discussion of reducing residual stresses in welding lines and improving the quality of welding. Residual stresses reduce the load bearing limit, the life of welded joints and change the forms ...
Dissertation for obtaining a master's degree in civil engineering, structural orientation, March 2013, abstract of the scope of using FRP materials for shear strengthening of reinforced concrete beams in
Dissertation of master's degree in civil engineering, structural orientation, October 1390, first chapter of generalities. 1-1 Introduction In recent years, there have been many advances in the field
Master's Thesis in Civil Engineering - Earthquake Engineering March 2012 Abstract Reinforced soil is a special material that is created from the combination of soil and reinforcing member. Arming components resistant to N
Dissertation for M.A. Department of Public Management with Transformational Orientation Abstract The purpose of the current research is to investigate the relationship between organizational climate and job stress and creativity among the employees of Salam Insurance General Administration.
Dissertation for Master's Degree in Clinical Psychology Abstract In this research, the moderating role of coping strategies and social support in the relationship between quality of life, psychological symptoms and parenting styles has been examined and 120 female heads of households in Alborz province were selected as the research sample. Research evidence and the results of ...
Dissertation for Master's Degree (M.A.) Major: General, Investigating the effectiveness of exercise on the level of self-esteem, happiness and quality of life of young people. For this purpose, among the beginner athletes who referred to the Darab fitness club in the summer of 2013, 60 people were available and 60 people were selected from normal people and they were matched ...
Dissertation for Master's degree (M.A.) Major: General, investigating the effect of communication skills training on social adjustment of high school girls. Abstract The purpose of this research was to investigate the effect of communication skills training on social adjustment of high school girls. For this purpose, among the female high school students referred to education ...
Master's Thesis of Geography and Rural Planning Abstract In the past, tourism and tourism were special for nobles and elites and due to economic and technical bottlenecks and..... It did not play a significant role in the social, economic, and environmental aspects of human life. But in sync with the events and profound social and economic developments in the life of societies ...
Dissertation for Master's degree (M.A) field: educational research. The abstract of the present study was prepared and compiled in order to investigate the effect of job pressures on the performance of secondary school female teachers. Data collection in this research is a descriptive survey method. The statistical population of this research is made up of 285 female education ...
Dissertation for Master's Degree in Clinical Psychology ((M.A)) Abstract: The present study was conducted with the aim of comparing identity styles and coping styles and behavioral activation/inhibition systems in addicts and normal people. The method used was causal-comparative and the research tool included Berzonsky's Identity Styles Questionnaire, Andler Parker's Coping ...
Dissertation for Master's Degree in Psychology (M.A) Major: Clinical Abstract Introduction: This study was conducted with the aim of comparing the personality traits and academic performance of normal students and under the cover of the Imam Relief Committee of the universities of Dere Shahr city. Cases and methods: This research is descriptive-analytical. The statistical ...
Master's Dissertation in the field of Psychology (M.A.) Major: Education Abstract: The purpose of this research was to determine the effectiveness of teaching coping skills and stress management on increasing the academic performance of Islamic Azad University nursing students. For this purpose, 32 nursing students were randomly selected and placed in two experimental and ...
Dissertation for Master's Degree (M.A.) Direction: Remote Sensing and Urban and Rural Geographical Information System Abstract: Subsidence phenomenon is one of the natural disasters that causes the reduction of underground resources such as underground water, oil, etc. One of the most important causes of land subsidence is the drop in static level and increase in effective ...
Abstract The main task of the synchronous generator excitation system is to provide the necessary voltage for the generator excitation winding. The excitation voltage is a dc voltage and it is used to create a flux in the excitation winding of the generator and consequently to produce a magnetic field to produce electrical energy by a synchronous generator. In the provided ...
Dissertation for Master's degree (M.A) orientation: ""Human resources, introduction to work, is a very important source for earning a living and attaining social positions, which at the same time can lead to dissatisfaction, depletion of physical and mental strength. Job-related stress causes dissatisfaction of employees and the emergence of significant negative effects in other ...
In order to obtain a master's degree in the field of civil engineering - soil and foundation orientation, Abstract Nowadays, circular foundations are more or less used for structures, especially structures that have axial symmetry. In this research, a numerical study was conducted on bearing capacity and settlement of annular foundation. PLAXIS software was used for modeling. ...
Dissertation for Master's Degree > Direction: Hydraulic Structures Abstract: One of the assumptions that is made to simplify the dynamic analysis of the existing weighted concrete dams is the uniformity of the foundation in terms of physical parameters such as modulus of elasticity and damping. This is despite the fact that, in practice, different geological conditions may ...
Dissertation for Master's Degree in Civil Engineering, Soil and Foundation Mechanics Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
The effect of fiber and pozzolanic materials on the mechanical properties of glass fiber reinforced concrete Master's Thesis of Civil-Structural Engineering Abstract The failure and destruction of concrete is highly dependent on the formation of cracks and microcracks. With increasing loading, microcracks are connected and form cracks. In order to solve this problem and also to ...
Master's Dissertation of Discontinuous Structure Abstract: In recent years, the use of composite material in the construction and strengthening of structures has expanded greatly. The structure of this material is such that there is a possibility of crack formation between the layers. Due to the increase in load, these cracks grow and cause a sharp drop in the strength and ...
Dissertation for receiving a master's degree in the field of civil engineering with a focus on soil and foundation. Abstract: The compressibility behavior of soils has become an important concern in geotechnical engineering. As buildings, embankments and roads are implemented, significant settlements often occur. Since long-term settlements occur due to creep, therefore, the ...
Dissertation for master's degree in the field of civil engineering, road and transportation, the abstract of asphalt failures is one of the problems that are the concern of road and transportation engineers today, and every year huge costs are spent on the maintenance and repair of asphalt roads. Many efforts have been made to increase the strength and life of asphalt, among ...
Master's thesis in the field of structural engineering. Abstract: The increase in vulnerability caused by earthquakes and the large number of earthquake casualties caused by structures and houses that are weak in terms of construction forces people to conduct studies to reduce these risks and damages. Studies such as severe earth movement and seismic hazards related to it play ...
Master's thesis in the field of civil engineering, soil and foundation, today, due to the progress of the tunneling industry, the need to analyze and design underground structures in rocky environments is felt more than in the past. Although there are many numerical and practical software available in this field, none of them are complete and perfect in all fields, and each of ...
Dissertation to receive M.Sc degree in civil engineering, structural orientation. Abstract: One of the ways to strengthen the building against lateral loads is the use of a wind system (convergent or divergent). The increasing use of steel braces to deal with earthquake forces requires that the seismic performance of these types of systems be given more attention. The common ...
Master's Thesis in Civil-Structural Engineering Today, domes and arches have found wide applications in architectural and industrial structures due to their suitable coverage of large openings. The use of today's technologies in styling and optimizing energy consumption in these types of structures is one of the important challenges facing engineers. Therefore, the need to ...
Dissertation of Master's Degree in Civil Engineering - Structure Abstract In metal structures, one of the most important places of stress concentration is the joint. In form cutting, the shear force at the connection point is so high that a part of the beam or its reinforcement is broken and separated in pieces, and this is due to negligence in the design of the connection or ...
Dissertation for Master's degree (M.S) Chapter 1 History of dynamic analysis of liquid storage tanks and regulatory orders in this regard Abstract The main goal of this research is to investigate the effect of the presence of seismic isolators on the dynamic performance of liquid storage tanks during an earthquake. In this regard, it is necessary to first know the dynamic ...
Abstract Underground facilities are an integral part of modern society and are used for many applications, including subways and railway lines, highways, material storage and water and sewage transportation. is used Underground facilities built in areas affected by earthquake activity must withstand both earthquake and static loading. By reviewing the historical cases of ...
Dissertation for receiving M.SC Master's degree Major: Water Engineering Abstract: Dams are the largest man-made structures. Their design often stems from their unique nature and the consequence of failure, which is certainly greater than the collapse of other types of structures. The stability of dam body and foundation structures can be analyzed and checked in various ways. ...
Master's Thesis of Electrical Engineering - Power Abstract: Induction motor condition monitoring is an absolutely necessary and important technology to detect various defects at the initial stage. which can prevent the spread of unexpected defects in the initial stages. Approximately 30-40% of induction motor defects are related to stator defects. In this thesis, a comprehensive ...
Dissertation of the master's course in electrical field (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are examined and the factors that cause them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, i.e. the ...
Electrical-Electronics Engineering Master's Thesis Abstract In this thesis, we have used graphene nano-ribbons as an active layer of a solar cell for the first time. To simulate this cell, the non-equilibrium Green's function method was used in the mode space, and the effect of electron-photon interactions was calculated by means of Born's self-consistent approximation. To ...
Civil Engineering Master's Thesis, Soil and Foundation Engineering Abstract In this thesis, in order to analyze the behavior of surface foundations based on reinforced soil, a simple physical method based on the resistance of materials called ""cone method"" is used, which is actually used as an alternative to the exact solution methods that are based on the three-dimensional ...
Master's thesis in the field of civil engineering, structure orientation Alkaline Aggregate Reaction [1] (AAR), is a chemical reaction that occurs in some concrete structures. (AAR) is a reaction between alkaline fluids in the pores and silica aggregates. Concrete failure, including expansion and cracking due to the alkaline reaction of aggregates, is of particular importance. ...
Tendency of soil mechanics and foundations. Abstract: Investigating the behavior of soils due to different loadings is one of the most important issues in geotechnical engineering. The behavior of soils depends on several parameters such as grain size, grain type, loading method, stress history, etc. Non-alignment of main stress and main strain directions is a phenomenon that ...
Civil engineering, soil and foundation, abstract, considering that all engineering infrastructures and vital urban and non-urban places and arteries such as: foundations of buildings, bridges, silos, dams, retaining walls, marine structures, industrial facilities, etc. . . All spread on a platform called the earth. The importance of investigating the type of instability in ...
Dissertation: In order to receive a master's degree in Persian language and literature, abstract in the upcoming thesis, love and its affiliates have been examined in the court of Saeb Tabrizi, a renowned poet of the Indian style. For this reason, first the verses in which the word love was directly present were extracted from the Divan of the poet. Then the concepts of love ...
A master's thesis in the field of civil engineering - hydraulic structures Abstract Liquid storage air tanks are used not only to store water, but also to store chemicals and toxic substances in different forms. Considering the use of these structures in civil and urban development and industrial networks, their importance is determined before and after the earthquake. The ...
Master's Thesis in Civil Engineering (Soil and Foundation) Abstract Dense sand piles have been used since 1950 in Japan and then in other countries of the world as one of the most effective and economical methods in strengthening soil in order to prevent liquefaction, increase bearing capacity and improve soils with different grain sizes. The process of implementing dense sand ...
Dissertation for Master's Degree in Sports Physiology Persian Abstract of Dissertation: Background and Purpose: The purpose of this research was to investigate the effect of a period of L-arginine supplementation on the responses of VEGF, endostatin and maximal oxygen consumption of trained wrestlers following a session of stimulating activity. Materials and methods: In this ...
Dissertation for Master's Degree in Chemical Engineering Abstract Paying attention to the issue of safety in industrial and chemical facilities is very important. According to the statistics, the amount of human, economic and environmental damages caused by industrial accidents every year in the world is very high. In addition, some of these damages are basically irreparable. ...
Dissertation for obtaining a doctorate degree in dentistry. Introduction Removing large amounts of dental tissue weakens the restored tooth. The type of restoration and composite method can be one of the influencing factors on tooth fracture resistance under occlusal forces. The purpose of this study was to investigate the effect of using new low-shrinkage composites on the ...
Dissertation for Master's Degree in Physical Education and Sports Sciences - Sports Physiology Abstract: Background and Objective: During metabolic changes during pregnancy, the mother's contact with heavy metals is considered very important for placental function and fetal health. But it has been assumed that endurance training by affecting the activity of metalloproteins such ...
Dissertation for Master's Degree in Nursing (Community Health Nursing Orientation) Abstract Introduction: Non-exercise and ineffective methods of dealing with stress are common among nursing students, which leads to negative health consequences, since these students will be role models for them as health service providers in the future. Purpose: The purpose of the present study ...
Dissertation: To obtain a master's degree in neonatal special care nursing Abstract Introduction: Premature babies are subjected to many painful interventions during care and treatment, and nurses should use non-pharmacological methods without risk to prevent short and long-term complications caused by pain, so this study was conducted to determine the effect of swaddling on the ...
Abstract: Introduction: Diabetes or sugar disease is a metabolic disorder (fuel production) in the body. In this disease, the ability to produce insulin in the body is lost, or the body becomes resistant to insulin, and therefore the produced insulin cannot perform its normal function. There are two main types of diabetes. In type 1 diabetes, the destruction of beta cells in the ...
Master's Thesis of Polymer Industrial Engineering Abstract Cross-linked polyethylene is one of the materials that is widely used in the field of insulation production in cables due to having suitable electrical properties and good electrical strength. Nowadays, one of the methods of optimizing the properties and changing the behavior of polymers is the use of filler particles ...
Master's Thesis in Mechanical Engineering, Applied Design, Abstract: Microelectromechanical systems are generally classified based on the type of their excitation mechanism. In addition to electrostatic excitation, which is considered as one of the most important excitation mechanisms, thermal excitation is widely used in multi-layered and functionally variable ...
Dissertation for Master's Degree in Mechanical Engineering (Applied Design) Abstract: Electromechanical micro and nano systems have been noticed due to their distinctive features and unique characteristics, mainly in the two fields of sensors and sensors, in various sciences such as mechanics, aerospace and medicine. Electrostatic stimulation is one of the simplest and most ...
Dissertation for Master's Degree in Agricultural Engineering (M.Sc) Major: Agriculture Abstract In order to investigate the effect of different sources of nitrogen and organic fertilizers on the yield and yield components of Single Cross 704 corn in the experimental area of ??Dehleran in the summer of 2012, it was studied as a split-plot experiment in the form of a randomized ...
Dissertation for a master's degree in civil engineering, soil and foundation mechanics. Abstract: Since many structures are built in dense urban areas, there is an increasing need to build buildings and geotechnical structures on soft clay soils. Clay soils usually show significant creep deformation. Although a lot of research has been done on the creep behavior of natural clay, ...
The thesis for obtaining a master's degree in the field of agriculture was carried out in order to investigate the effect of planting date and density on the growth characteristics and yield of experimental potato cultivars during 2013 in Mojn city of Shahrood city. The experiment was carried out in the form of factorial split-plot design based on randomized blocks in three ...
Dissertation for Master's Degree in Agricultural Engineering, Agriculture, Abstract: Environmental stress is one of the most important factors that determine the pattern of plant distribution in the world, and drought stress also determines a part of this distribution. Garlic is a plant that has been of special importance in terms of food and medicine in human life for ...
Doctoral thesis of electrical engineering - Power Abstract Islanding of interconnected power systems, which is also known for isolating and breaking power systems, is the last line of defense to deal with the collapse of the system and prevent catastrophic incidents in the power network. The islanding of interconnected power systems is presented as an extensive control method as ...
Dissertation for receiving a master's degree in agricultural engineering majoring in agriculture, abstract of this project in order to investigate the effect of nitroxin fertilizer under the conditions of irrigation interruption (based on BBCH, plant phenology stages) on the physiological and agronomic traits of fodder millet cultivars in Damghan region in 2011-2019 as a ...
A master's thesis in the field of mechanics, applied design, abstract. These two characteristics are caused by phase transformations under different thermodynamic loadings. Depending on these two mentioned features, memory alloys can be used as actuators in different forms. These structures can be used in different fields such as medicine, aerospace, knowledge
Thesis for Master's Degree in Animal Nutrition Abstract The purpose of this research was to investigate the effect of different levels of black seed on growth performance, some blood factors and immune response in quail. For this purpose, 240 one-day-old quail pieces were distributed in 4 treatments and 4 repetitions and 15 quail pieces in each repetition in a completely random ...
Master's Thesis in Mechanical Engineering-Applied Design Abstract In this thesis, classical sheet theories, first-order shear deformation theory and refined two-variable theory for the free vibration problem are investigated using standard finite element and hierarchical finite element methods. The refined two-variable theory is an equivalent single-layer theory, in which two ...
Dissertation of the Master's course in the field of electricity (M. Sc) orientation: power Abstract: In this thesis, electrical and mechanical defects in electric machines are first examined and the factors causing them and the methods of fixing these defects are stated. After that, with the help of the winding function method of the simulation machine and the intended error, ...
Mechanical Engineering Master's Thesis - Energy Conversion One of the ways to reduce energy consumption for underwater devices is to reduce the drag on these devices. The nose of underwater objects is one of the most important parts of these objects in dealing with currents. By optimizing this part, the drag can be reduced by controlling the boundary layer of the fluid, by ...
Dissertation for Master's Degree in Rock Mechanics Abstract: Rock mass blasting ability is a very important feature in explosive designs in mines and construction activities, which is closely related to rock mass system, environmental conditions and blasting system. Among the factors affecting the explosiveness, there are controllable ones, and there are some that are ...
Master's Thesis in Mechanical Engineering - Applied Design Abstract of elastoplastic analysis of thick-walled tanks made of targeted materials with linear kinematic stiffness behavior under cyclic loading, stress analysis and deformation of spherical thick-walled tanks made of subject materials under internal pressure loading and temperature difference are discussed in this ...
Dissertation for Master's Degree in Rock Mechanics Abstract The unexpected stress intensity factor of some engineering structures has caused a lot of financial and collateral damage. In investigating the causes of failure, researchers gradually found that the design of many of these structures was correct based on the theory of elasticity and resistance of materials, and the ...
Master's Thesis in Mechanical Engineering (Applied Design) Abstract of Gas Turbine Rotor Stress Analysis Using Continuous Damage Mechanics In this thesis, Lometer's unified model based on continuous damage mechanics is used to model the stress-strain behavior of a gas turbine rotor sample. The unified damage law, which is used to model creep-fatigue interaction, is based on the ...
Master's thesis in the field of mechanics, specialization: mechanical engineering - energy conversion. Abstract: One of the most important components of fluid transmission systems are control valves, which can be seen in different routes of oil and gas transmission pipelines, etc. In control valves, the most important issue is the property of the flow in order to achieve the ...
Mechanical Engineering - Applied Design Orientation Abstract: Vibration is one of the important and basic concepts in engineering sciences. In simple words, any system that has mass and spring property has the ability to vibrate and can vibrate at a natural frequency. It can be said with certainty that 95% of vibrations in industries are harmful to systems. If the system is in ...
Dissertation for receiving a master's degree (M.Sc.) specialization: agriculture, the effect of drought stress and nitrogen fertilizer on the yield and amount of essential oil of German chamomile. Abstract, the purpose of the implementation The experiment is to obtain the effect of drought stress and different levels of nitrogen on the yield and the amount of essential oil of ...
Master's Thesis in Mechanical Engineering (Applied Design): Abstract of the analysis of leading damage in pin connections of composite materials. The purpose of this research is to analyze the leading damage in pin connections of composite materials. To do this, finite element software ABAQUS and FORTRAN programming have been used. The contact between the composite plate with ...
Master's Thesis of Horticultural Sciences, Physiology and Breeding of Medicinal Plants Abstract In order to investigate some physiological and morphological properties of castor plant under drought stress and nitrogen fertilizer in different cultivars of this plant, an experiment was conducted with a basic design of randomized complete blocks in the form of split factorial in ...